If you want to make a chandelier lampshade by hand, what are the methods?

Introduction: Lighting will be installed in various rooms at home, chandeliers are the decoration that must be installed in the living room, but if you don't replace the lighting all year round, it will be very boring. <>

Knitting sweaters is a very interesting handicraft, whether it is some young people or middle-aged and elderly women are very fond of using wool to make some things, such as sweaters, scarves, cotton shoes, the same wool can not only make these clothing items often used in life, but also they can also form a beautiful lampshade. Blow a balloon, and then wrap the glued wool around the balloon, the distance between the coil and the coil can be larger, when the wool is dry, you can pop the balloon, you will get a very good-looking lampshade. You can put these lampshades on top of the chandelier, the light and shadow created are very beautiful, and they can also add a lot of atmosphere in the middle of the living room, and the light emitted will be beautiful.

In ordinary life, there are often clothes or clean silk fabrics that are not needed, these fabrics may not be enough to make a piece of clothing, and it is very reluctant to throw them away, so you can use them to make lampshades, you can design some of your favorite shapes by yourself, but you should also combine the shape of the lamp at home to design some shapes, so that the lampshade will be more beautiful when placed on the lamp, and will not cause too much abruptness. <>

Shopping malls often sell some handicrafts made of bamboo branches, and these bamboo-woven handicrafts are also very good-looking, so you might as well try it yourself, and weave some lampshades with fine bamboo, which will be very beautiful and beautiful. Especially installed on the lighting, it will make the temperament of the whole lighting better, and it is also natural and pollution-free, without additives, and will not volatilize some unpleasant odors under the irradiation of the light.

It can be made with wool, and the wool can be woven into the shape of a lampshade according to the tutorial and put on the lampshade, or it can be made from a cardboard box, trimmed to the appropriate shape, pasted, and then added with decorations.

The production method of homemade lampshade is as follows:

1. Draw a draft diagram first, what kind of lampshade do we want.

2. Then draw all sides of it again.

3. In addition, you need to prepare scissors, carving knives, glue, wires with lamp holders, etc.

4. Cut out all sides from the cardboard.

5. Glue them together to get a standing manuscript lampshade.

6. Finally, install the lampholder, and this geometric lampshade is completed!

The method of hand-making geometric lampshades from cardboard** is full of futuristic feeling. Sizheng Xiaolu is very simple, draw all sides of the lampshade, then cut it out on cardboard, and then get this geometric lampshade by pasting. If you are also interested in this lampshade, you may wish to refer to the ** above to try it!

A lampshade is a cover that is placed on the periphery of a lamp flame or on a bulb to collect light or protect against weather. The lampshade is not only used to cover the lamp so that the light gathers together, but also to prevent electric shock, and it also has an effect on protecting the eyes.

The lampshade is not only a cover on the lamp in order to make the light gather together, but also to prevent electric shock, and it also has an effect on protecting the eyes of the potato fingers, so most lamps will have a lampshade on them.

You can make your own at home with wire and Coke bottles. This will not only make full use of energy, but also add a lot of life to the home. It is a good choice, but you should pay a little attention when choosing a bottle, choose the right bottle according to the same size, and then be careful when making it to avoid cuts.

Blow up the balloon to the size of the lampshade you want. Inflate a standard balloon to your desired size. It all depends on how big the lampshade you are doing. <>

Cover the balloon with a thin layer of petroleum jelly. This helps prevent the cloth from sticking to the balloon when you open it. Be sure to coat it evenly around with plastic paper.

Mix the white glue, flour and water in a bowl. Pour 4 oz (118 ml) of white school glue into a bowl. Pour in 1 tablespoon (8 grams) of white flour and 2 milliliters (30 milliliters) of water, then use a spoon to stir them completely into a dusty crust.

Place a lace in the middle of the top part of the balloon. Choose any cloth you want to put on top. Gather it together and smooth it as smoothly as you can with your hands.

Apply a layer of glue mixture to the lace with a paint brush. Start in the middle and walk towards the door. Apply an even coat of coat throughout the lace.

Place another doll on one side of the balloon so that it overlaps slightly with the first one. Choose another one in the shade. Place it on top so it overlaps the edge of the first layer so there are no gaps, and keep it in place.

Apply another layer of adhesive mixture to the second layer of adhesive tape. Use your brush to mix with an even glue to coat the entire lace. Keep holding it in place until you're done covering it.

Place the cloth over the balloon until it is covered. Add a small cloth at a time on both sides of the balloon and overlap it with the cloth around it. Use your paintbrush to coat them with the glue mixture so that they stick to the right place for Brother Woo.

Allow the cloth to dry overnight around the balloon. Place the balloon in a place where it cannot be rolled, such as in a bowl. Let it sit for at least one night, or until the tissue feels completely dry and stiff to the touch.

The lampshade is a cover specially designed to protect the electric lamp. For the bulb, if the lampshade is used, then its life will be longer. There are various different types of lampshades available in the market nowadays, but in fact we can also make our own lampshades.

And the method of making it is also very simple. Here's how to make your own lampshade.

Introduction to how to make your own lampshade

1.The first step is to prepare materials, we need to prepare materials such as floral decorative fabrics, metal lampshade frames, needles, threads, scissors, double-sided tape, these are all necessary materials, you must be ready.

2.Once the materials are ready, we can do it. The first step is to spread the cloth flat, and after spreading it out we need to use scissors. This is done by cutting a small opening every inch with scissors.

3.Once it's built, we can start tearing along the cut we just made. When tearing, we only need to tear it into the shape of a strip of cloth at the end.

4.Take out the metal lampshade holder and fix the end of the cloth strip with a needle. When fixing, we try to sew the joint on the inside, which will be more beautiful.

5.After sewing, the strips of cloth are wound back and forth around the metal lampshade frame. Once we have reached the end of the metal lampshade frame, we can start sewing the next strip of cloth.

6.When doing this, we should pay attention to avoid the horizontal support at the top of the metal frame, the way to avoid it is very simple, just use scissors to cut a small hole in the edge of the Yusheng weaving. We repeat the above steps until we wrap the entire metal lampshade holder.

7.When we're done wrapping, we can start making the ends of the shade. When making the ends, we can change the color to make it. This will be more aesthetically pleasing.

8.After finding the fabric for making the ends of the lampshade, you can fold it in half that is more than an inch thick and subflat. Then use double-sided tape to glue the inside of the weave tightly. After gluing it tightly, stick it to the top of the metal lampshade holder.

9.As in the previous practice, when we encounter a horizontal support, we also need to cut a small hole in the weaving. Then after pasting the upper and lower ends of the lampshade, the lampshade is successfully made.

After the production is completed, we can also check whether the paste is firm.

In fact, there are many things in our lives that are made by ourselves with our own creativity, and the items we make will be more meaningful, and at the same time we can save a lot of money, so it is a very happy thing to make some items by ourselves. We should be more hands-on in our daily lives.

You can get it for free