How to troubleshoot common faults in gas tanks

In order to make the machine have a good use environment, in order to make their service life longer, we must ensure its normal maintenance, and carefully make records in order to do a good job in each job.

1. Before starting the machine to run, we need to check whether there is oil leakage in the machine.

2. Every time we click the start button, we need to wait for a certain amount of time, and observe whether the gas tank has a drop, and only when the temperature is normal can we start using it normally.

3. When you start using it, you should pay attention to the change in temperature, as long as it is kept at room temperature.

4. When you first start using it, you should observe whether the various instruments of the gas tank are normal, whether the indicator light will be displayed, and whether the gas tank will vibrate when it is running. If there are other sounds, we should stop using them immediately.

5. After the end of each day's work, remember to clean up the dust on the outer body of the gas tank, record the relevant data changes in a timely manner every day, and implement the state of daily clearance.

6. The gas tank in the high temperature state for a long time needs a ventilated place, so we should install a radiator reasonably, so that the service life of the gas tank will not be affected. Clean at least once a month, and at least once every two months. In this way, the heat dissipation effect can be guaranteed.

7. After use, the filter and air filter should be cleaned. These will affect the service life of the gas tank, prevent them from clogging, if there is a very fine dust into the main engine, it will damage the use of the main engine, then the machine will also vibrate or some alarms when running.

8. When we use the lubricating oil of the gas tank, we should use the special oil for the gas tank. This has a high level of safety, and the use of other oils may cause damage to the gas tank.

May I ask what are the common faults you are talking about?

There are 2 possibilities:

1. The external thread of the pressure gauge and the internal thread of the tank are not matched. The internal thread of the nut of the tank should be G thread, while the pressure gauge is M thread when there is no special order demand.

2. Due to the mismatch between the pressure gauge and the tank thread, the internal and external threads of the two are damaged at the same time during installation, resulting in air leakage, in this case, it is necessary to replace the tank nut and the pressure gauge with the matching thread at the same time.

The gas delivery will be repaired, what are you worried about.