My laptop is always disconnected, or I can t go to the Internet, how can I solve it??? Urgent!!

If you have bought a computer for a long time, can you see the elasticity of the eight metal reeds inside the female end of the plugged network cable, okay? Has there been any deformation that has collapsed? If there is, you can use a small needle to gently pick the deformed back and it's OK.

If you bought a computer not long ago, you can open the device manager to check if there is a device that is not working properly! Is there ** software or **** software in the program you run?,If so, it's closed.。 Clear the IE cache.

If it doesn't work, go to the property window of the online neighbor, right-click on my connection to fix it, if the repair is completed quickly and the IP address is obtained, then it proves that your network connection is normal, otherwise the network connection is abnormal. If a thread makes the CPU 100% for a long time or the hard disk indicator is always on when surfing the Internet, then it may be your computer software network problem or a virus!

Let me ask you first, what is the specific manifestation of your disconnection? Is the lower right corner of the display network cable not plugged in, or can not get the IP, if the display network cable is not checked, you can go on for a while and then drop, that may be your network cable slot problem, poor contact, if it is unable to get IP, or IP conflict, set the static IP, should be able to solve, if you can't solve these problems, either you have a hardware problem, the network card has a problem, or it is a system problem or a network card driver problem, temporarily think of so much, think of you to add.

It is recommended to use a router that is also 5,6 ten.

Most likely an IP conflict.

In our daily use of computers (including pen comic travel guess books), there may be occasional intermittent internet disconnections. It was fine, but suddenly my computer was disconnected, what is the problem, how to solve it?

1. There are five main reasons why the computer is automatically disconnected and reconnected:

1. The network ring is that the environment is too poor, and the data transmission is too slow, resulting in jamming and then disconnection, and then frequent reconnection, and repeatedly;

3. There is a problem with the router or switch, which belongs to the hardware category and can only be repaired or replaced;

4. There is a problem with the network card driver, the version is too old, or the driver is not compatible with the hardware. It is recommended to use driver software (such as Driver Genie and Driver Life) to troubleshoot.

5. The network cable is not plugged in well or the contact is loose.

2. Solutions and steps;

1. Find "Computer" on the desktop, right-click, find "Management", and enter.

2. In System Tools, select "Device Manager".

4. In the properties, select the "Advanced" tab, and then scroll down to find "Connection Speed and Duplex Mode".

5. In the "Value" column, select "100mps half-duplex", and then click OK, and then the system will automatically restart the network. Facts have proved that this method is helpful for many network freezes or disconnections, and the network environment is improved after use.

Many people are playing games when the computer suddenly disconnects, how to solve this problem? I've put together a laptop for you below.

Several scenarios and solutions for sudden disconnection of laptop

Check the line connection].

1. If the network is suddenly disconnected, the first thing we need to look at is the cat or a few indicators on the router, if it is not all on, then there may be a problem with the line, we can check whether the network cable is loose.

2. If the network cable and other connections are good, we can consult the relevant service personnel and ask if there is a problem with the bus, if there is a problem with the bus, we can only wait for the maintenance to accompany the master to repair.

Network Restricted] 1. If the network restriction is displayed, it may be an IP conflict or an ARP attack.

If the computer is disconnected, we can open the control panel in the computer.

Network and intent options, and then look at the connection properties.

2, in the connection properties, there is an option to diagnose the network, we click on it, try to let the system automatically detect the error and then fix it, if it is a problem that cannot be solved, restore the cat or router to factory settings.

That is, the small dot next to the power button behind the dot will do.

Third-party software repairs].

If you have this kind of software, you can also use it directly to help you test, first open the computer clinic function of the computer manager - toolbox.

2. After opening the computer clinic function, there is an Internet abnormality option, click once, and then select [Internet can't go online] in it, and then click on the immediate repair chain to change the state, it will automatically help you detect and repair, very easy to use.

Because the mobile phone is connected to the wireless network without a problem, you can rule out the network problem at home, then it is a problem with the laptop, so we need to make the following settings on the laptop to solve it.

1. Right-click on the desktop and select Management, open the Device Manager, select the network adapter on the right, find the wireless network right-click to select Properties, open the properties dialog box, click Power Management on the far right, and remove the tick in front of "Allow the computer to turn off this device to save power".

2. Right-click on the desktop and select Management, open Device Manager, open Services on the left, find the WLAN Autoconfig service in the rightmost service, double-click to open, in the general options, the startup type is modified to Automatic.

3. Open the control panel, select Network and Sharing Center, select Change Adapter Settings on the left, double-click to open WLAN status, open wireless properties, check Automatically connect when this network is within the network range and Connect even if the network does not broadcast its name.

4. Right-click on the desktop to select Management, open Device Manager, select Network Adapter on the right, find the wireless network, right-click to select Properties, open the Properties dialog box, select Advanced, find the Wake-on-LAN and shutdown connection speed, and select the value without slowing down; Advanced environmental protection and energy saving, minimum power consumption shutdown; Find the wireless mode, modify the value as, Note: The display value of each computer in the above wireless network attribute advanced settings is different, it is not necessary to set each item, and there is no need to set the function.

5. Use the driver butler to upgrade the wireless network card driver to the latest version, and it is recommended to use the driver president to update the driver.

Through the above operations, the problem of computer wireless network is always disconnected can be solved, is it very simple, if you have this kind of problem, you can use this method to solve it, like friends, welcome to like, collect, follow.

You can try the following troubleshooting methods:

1. Check the network cable.

Open the Control Panel.

Select Network & Internet, and check either WLAN or Ethernet.

Connected. 2. Re-obtain the IP address.

Information. When the network still cannot be connected after troubleshooting the network cable, we need to check whether the IP address of the unit is properly assigned. In Windows 10, use the key combination (Win+X), select the command character (administrator), and enter ipconfig to view.

If the following situations occur, or if the IP address starts with 169, it means that the NIC has not obtained the correct IP address.

If you want to obtain the IP address of the Internet through DHCP LAN, you can use the ipconfig release command to release the existing IP address information, and ipconfig renew to obtain the appropriate IP address from DHCP.

3. Diagnose network connections.

Under Windows 10, you can check out the causes of some problems with the help of "Windows Network Diagnostics". Open the control panel, select Network & Internet, check the properties of WLAN or Ethernet, and click Diagnostics to enter Windows Network Diagnostics to check.

If you check for related issues, you can fix them based on the issues found.

Fourth, the network card driver is too new or too old.

This needs to be checked, and the driver is generally issued by the hardware manufacturer and certified by Microsoft.

The network card driver.

5. Reset the network settings to the default values.

Start - > search process and file input"cmd"and press Enter

Click cmd to execute.

Type netsh winsock reset and press enter, you need to restart the computer (restart).