Which is better for custom wardrobes, which is better?

Customizing a satisfactory wardrobe has always been a hot issue in people's minds, and the selection of materials, design and style of wardrobes need to be considered.

Particle boards

Solid wood particle board is a wood-based panel composed of wood or wood poles, logs crushed, fine wood fibers are used on both sides, long wood fibers are sandwiched in the middle, and adhesives are applied under heat and pressure, and its cross-section presents a honeycomb board. The particle board is spliced with wood chips, so its surface is smooth and delicate, there will be no knots, insect eyes and other defects, and the stability is good, and the material is uniform. The surface of the particle board is smooth and delicate, with no or relatively few insect eyes, no warping, no cracking, and has the advantages of high physical and mechanical strength, equal longitudinal and transverse strength, sound insulation, mildew prevention, economy, and heat preservation.

It is more decorative than other woods. The particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes. The density of particle board is generally greater than that of solid wood, and the physical and mechanical properties are excellent, and the closest to natural wood is better than natural wood in various wood-based panels, so the machine processing performance is excellent.

MDF

MDF has uniform structure, fine material, stable performance, impact resistance, easy processing, and is widely used in domestic furniture, decoration, musical instruments and packaging. MDF is easy to finish, and all kinds of coatings and paints can be evenly coated on MDF, which is the preferred substrate for paint effect. And the appearance is beautiful, the material is uniform, and there is no problem of dehydration.

However, MDF is not moisture-proof and swells when exposed to water.

Solid wood

I believe that we are no strangers to solid wood boards, solid wood wardrobes have the advantages of health and environmental protection, durability and beautiful shape, and the style is not limited by the material, can be freely customized, in line with the needs of people today. However, the solid wood wardrobe also needs to be ventilated more when it is wet, and it is necessary to place mothballs and other insect repellent and dehumidifying supplies to ensure their use.

I believe that after the above points, we have a clear understanding of particle board, MDF and solid wood, and we can choose the material of the wardrobe according to the characteristics of our own.

When decorating a wardrobe, which is better, solid wood particle board or MDF? Fitment; Huizhou decoration; renovation companies; Villa; villa decoration; Type; small apartment; interior design; decoration style; Decoration renderings; Toilet; Balcony; Living room; Bedchamber; Kitchen; New Chinese Style; Modern minimalism; Light luxury style.

The best choice is solid wood, as it is the only one that has a natural fragrance, the other two are synthetic.

It depends on the style you like, just use solid wood pellets for modern times, and find one with a high level of environmental protection. It doesn't take long to live, suitable for the renovation of old houses, if you like solid wood, you can choose wood with high hardness without paint, the most environmentally friendly, if you want to reduce costs, you will choose pine, you must give the paint taste time, not suitable for renovation houses.

Compared with these three, of course, it is good to be solid wood, which has a natural texture and a soft color that looks very comfortable. Solid wood furniture is a thermal insulator, so it will not make people feel cold and uncomfortable when in contact with people.

MDF, in the process of customization, requires a large amount of glue, more glue, of course, it is very unenvironmentally friendly, and in a few years it may become moldy, damp, and deformed.

Particle board is the most used board for custom wardrobes, many people also call it solid wood particle board, or particle board, and this kind of board is not only one, there are domestic and imported points, of course, imported ** is also expensive, imported Egger board, Kronosebon and so on are relatively well-known.

Multi-layer solid wood board is better waterproof than particle board custom wardrobe, so custom cabinets are recommended to use multi-layer solid wood, which is easier to deform with wardrobes, as for environmental protection, custom wardrobes are made of glue, which are not very environmentally friendly.

MDF is more suitable for wardrobes. First, the composition is different. 1. MDF cuts the original wood into pieces.

2. Particle board is made of small wood.

Second, **Different:The difference between the two is relatively large, and the MDF is higher.

Third, the surface is different:1. The surface of the MDF is relatively flat and smooth, its characteristics are stable, and the material of the board is also relatively delicate.

2. The surface of the particle board is rougher.

Fourth, the environmental protection is different:Particle board uses less glue, so it will be more environmentally friendly.

The above content refers to Encyclopedia-MDF.

Encyclopedia - Solid wood particle board.

[Calculate how much it will cost you to renovate your home].

Which is better, MDF or particle board? Now let's analyze: what are the advantages and disadvantages of MDF?

MDF: It is a kind of wood-based board made of wood fiber or other plant fibers, which is made of wood fiber or other plant fibers as raw materials, crushed, separated from fibers, dried and then applied with adhesives, and made after hot pressing. Pros :

The material is relatively fine, and the edge of the cutting surface will be sealed well, so that it is not easy to open the glue. It is easy to styling. Cons :

Because the substrate is made of powder, more glue is used than particle board, which is more likely to cause environmental problems. Secondly, due to the large glue content of MDF, the internal structure space is less, and the moisture resistance is poor. If a piece of MDF is soaked in water for 24 hours, it can be clearly seen that the four sides of the MDF are warped and deformed after more than ten hours.

Solid wood particle board: It is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. Pros :

1) The inside is granular with a cross-staggered structure, so the nail holding force is good. These machinability properties are significantly better than MDF. 2) High density, large wood fiber particles in the board, retaining the essence of natural wood.

In the use of adhesives, the content of solid wood particle board is generally less than 5%, and the environmental protection is better. 3) Small warpage deformation, good dimensional stability, high strength and stiffness. Cons :

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

The glue used in the production process of the two is the same, but because the MDF is fibrous, usually in terms of the amount of adhesive used, the amount of glue used in MDF is 5% more than that of solid wood particle board; Second, when making fiberboard, the process is not allowed to undergo dehydration treatment, and the solid wood particle board must be dehydrated when pressing, and most of the formaldehyde will be chemically reacted in the process of dehydration, leaving only a small part of free formaldehyde. Comparatively speaking, solid wood particle board is more environmentally friendly.

It is recommended that the pellet version is a little better.

Is MDF (MDF, referred to as MDF or MDF) better? Or is particle board better?

First of all, MDF is the popular term of MDF, which is a kind of man-made board made of wood fiber or other plant fibers as raw materials, crushed, separated and dried with urea-formaldehyde resin or other applicable adhesives, and then hot-pressed.

The advantages are: the material is relatively fine, and the cutting surface will be sealed well when the edge is sealed, so that it is not easy to open the glue. It can be pressed into various shapes, so there are usually more door panels. The flatness is better!

The disadvantage is that because the substrate is powdered as raw material, more glue is used than particle board. Why is there more?

For example, particle board is the pellet of wood and the other is powder, which is like mixing mud, one fine sand, one stone, and of course fine sand with more water. In the same way, MDF has a high glue content. Another is that the nail holding force is not good, if the nail is loosened after tightening, because the strength of the MDF is not high, it is difficult to fix it, so it is rarely used to make a cabinet.

Speaking of particleboard, particleboard, also known as particle board and bagasse board, is a wood-based board made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. The principle is the same as that of MDF.

The advantages are: very good moisture resistance, high density and good strength. The glue content is small, and the nail holding force is better than that of MDF, because particleboard is a natural wood crushed into granules and pressed into boards, which is the main material of cabinets at present.

MDF is formed by pressing powdered wood chips, which has good flatness but poor moisture resistance. In contrast, particleboard has a better nail grip than MDF.

The disadvantages are: the flatness of particleboard is not as good as that of MDF, and it cannot be curled and shaped. Because the particleboard is easy to make, the quality varies greatly, and it is not easy to distinguish, and the bending and tensile resistance of the particleboard is poor.

It's too professional to give an example! MDF is like a wall made of sand, and particle board is a wall made of small stones.

Everyone thinks that the appearance is more important, choose MDF, and the molded European style is molded door panels. If you choose a strong, solid one, choose particle board.

The cabinet part must be particle board, the cabinet door has a shape, MDF, and no shape is used particle board. Under normal circumstances, particle board is easier to meet environmental protection standards than MDF, most of the domestic particle board manufacturers can reach the E1 standard, MDF is only a few, most of them can not reach E1, in the modern situation that everyone is more healthy and environmentally friendly, I recommend that you still choose particle board (domestic famous manufacturers like Dew River, Daya, etc.).

Which is better, MDF or particle board, you will understand after reading it.

What is the difference between particle board and MDF! Which is better, solid wood particle board or MDF.

As long as MDF and particle board meet the national standards, there is no difference between high and low formaldehyde content.

Of course, MDF and particle board must contain some formaldehyde, after all, some glue will be added during the production process. If there is a difference between MDF and particle board, particle board has more formaldehyde, because particle board is made by glue bonding, and MDF is pressed by high temperature and high pressure.

First of all, the manufacturing process of particle board is different from that of MDF, and the production process of MDF is more complex. Particle board is a board made of wood scrap as a material, and the physical and chemical essentials are taken to participate in the processing of adhesives or other additives. Compared with natural firewood, it has a wide board surface, a smooth and smooth appearance, and no disadvantages such as knots, insect eyes and anisotropy.

Not only that, particle board also has the advantages of no warping, no cracking, high physical and mechanical strength, equal longitudinal and transverse strength, sound insulation, mildew prevention, economy, heat preservation, etc., and is a very excellent material.

Customizing a satisfactory wardrobe has always been a hot topic in everyone's mind, and the selection of materials, design and style for the wardrobe need to be considered, so for the material, which one is the best of the best?

Particle board solid wood board is a man-made board synthesized by wood or shaft, wood crushing, fine wood fibers applied on both sides, long wood fibers sandwiched in the middle, and glued under the effect of heating and pressure after releasing the adhesive, and its cross-section shows a honeycomb board. The particle board is spliced with wooden edge material, so its surface layer is smooth and fine, there will be no knots, insects and other problems, and the stability is good, and the material is uniform. The surface of the particle board is leveled and meticulous, and there is no or relatively rare moth-eaten, no expansion and contraction, no cracking, and it has the advantages of high physical and mechanical strength, equal longitudinal and transverse compressive strength, sound insulation, mildew removal, economic development, heat insulation and so on.

More decorative than other woods. The particle board has small warpage and deformation, good dimensional stability, high strength, good tensile strength, and is not easy to bend when hanging thick clothes. The relative density of particle board is usually higher than that of solid wood board, and the physical properties of physics are exquisite, and the closest to natural wood is better than pure natural wood in various man-made boards, so the production characteristics of the equipment are exquisite.

MDF MDF has a symmetrical structure, delicate materials, stable quality, impact resistance, easy production and processing, and is widely used in domestic furniture, interior decoration, traditional musical instruments and outer packaging. MDF is very easy to carry out scraping production and processing, and all kinds of architectural coatings and paints can be evenly coated on MDF, which is the first choice for the actual effect of paint. And the appearance is beautiful, the material is symmetrical, and there is no problem of drying.

However, MDF is not waterproof and swells when exposed to water.

Solid wood board for solid wood board I believe you should be very familiar with, solid wood cabinet has the advantages of health and environmental protection, sturdy and durable and beautiful appearance, and the design style will not be limited by the material, can be freely customized, in line with today's needs of everyone. However, solid wood cabinets must also be ventilated when they are wet and cold, and they need to be equipped with mothballs and other insect control and dehumidification appliances to ensure their application.

I believe that through the above points, you have a clearer understanding of particle board, MDF and solid wood board, and you can choose the material of your wardrobe according to your own characteristics.

"Particle board is a kind of board used for custom wardrobes, many people also call it solid wood particle board, or particle board, and there is not only one kind of this board, there are domestic and imported parts, of course, imported ** is also expensive, imported Egger board, Kronosebon and so on are relatively well-known. The domestic particle board is generally E1 grade, and the imported one reaches F4 star, so when customizing, in the long run, it is recommended to use imported particle board, and EGGER board is very good. ”