How to install a custom wardrobe? How to customize your wardrobe

Preparation stage. The material is present.

For more formal furniture manufacturers, cardboard packaging is generally available when the panels are delivered to the site. After unpacking, check the plates and hardware.

Set the screws. The nail holes are generally left on the plate according to the design drawing, and the workers on the site fix the screws with special tools.

Tailor the side panels. Since the wardrobe is placed against the wall, a piece of the skirtboard should be sawn off from the side panel. Place it to see if it fits.

Installation phase. Place the base plate.

The floor where the bottom panel of the wardrobe is placed should be cleaned beforehand, because it will be very troublesome to clean it after installation.

Fixed frame. Install the side and back panels of the wardrobe according to the grooves on the panels, and adjust the position between the panels.

Install the top plate. It is best to prepare a stool for climbing on site, and the top plate should be raised and placed on it, and then fixed with rivets.

Install the shelves. Place the shelf where the screws have been screwed in advance and secure. Pay attention to adjusting the fixed position of the shelf, back and side panels.

Fixed door rails. Door rails are installed on the top and bottom edges of the wardrobe, and the alloy material for the door rail is better, light and firm.

Install the clothes rail. Fix the rivets in the reserved position and install the clothes rail. Pay attention to balance on both sides.

Wrapping Stages. Install the door leaf.

The two sliding doors should be installed in the position of the guide rail, and the door leaf should be fixed first, and then the guide rail at the bottom should be fixed, so as to avoid the phenomenon of the door leaf falling off in the future.

Adjustments and improvements. After all the installations, do a "full inspection" of the wardrobe, and adjust it in time if there is any deviation.

Complete acceptance. Finally, do a check on the wardrobe: shake the cabinet to see if it is firm and whether the details are in place.

Precautions. The above is an example of door-to-door installation of wardrobes, wardrobes can be "tailor-made, tailor-made" according to the actual situation of the owner's home, really do personality, practical to achieve subtleties, but in the installation of the need to pay attention to the process, otherwise good things can also become bad!

If you make a custom wardrobe, it is generally installed by the merchant, and you don't need to install it yourself.

Feel free to consult me if you need it.

1. Determine the location: Before customizing the wardrobe, the installation position of the wardrobe should be determined, because after the custom wardrobe is done, it cannot be moved and transformed at will, so this step becomes very important. When determining the location of the wardrobe, you can choose according to the layout of the bedroom.

2. Determine the size: After determining the installation position of the wardrobe, we need to determine the size of the wardrobe. This can be determined by the size of the installation location or the amount of clothing stored.

If the space area of the bedroom is larger, you can make a larger wardrobe, and after determining the size, you can directly call the master to come to the door to measure.

3. Determine the style: Customized wardrobes can not only meet people's needs, but also have a good decorative effect, which can improve the visual effect of bedroom decoration. When choosing a wardrobe style, it is necessary to choose it according to the actual decoration style of the interior, otherwise it is easy to conflict with other decorations and destroy the overall beauty.

4. Determine the material: There are many materials for customized wardrobe products on the market, such as elm, willow, wenge, particle board, ecological board and particleboard, etc., and the use properties of different materials are also different. When you determine the materials for wardrobe production, you can choose according to the environment in which the wardrobe is used.

5. Determine the design drawings: When the production materials of the wardrobe are selected, you can start to confirm other projects with the design company, such as when it can be done, when to install it, and how much is the specific **, which is indeed concise and envy, you can let the company produce a detailed design drawing.

The above is the introduction of how to customize the wardrobe by dismantling, I hope it will help you.

Unlike a finished wardrobe, a custom wardrobe fits perfectly into the structure of the room, making the installation process more complex. As the saying goes, three points of customization, seven points of installation, so it is particularly important to understand the installation process of custom wardrobes and avoid pitfalls in the installation process in advance.

1. Check in advance.

Check whether the packaging is intact and damaged, and if so, ask the installer to open the box and check whether the internal furniture has bumps, scratches, appearance, color and other problems. If there is a problem of selling good celery, communicate with the after-sales personnel of the merchant in a timely manner, and let the installer confirm the situation to protect their own rights and interests.

2. Pay attention to protection.

When installing, it is necessary to pay attention to the protection of other locations in the home, and the furniture is generally the last to enter the home decoration, focusing on: floors, doors, door covers, wallpaper, stairs, wall lamps, etc.

3. Supervise the whole process.

Personally supervise the installation process to see if there is any damage during the installation process.

Fourth, accessories installation.

The installation of handles, handles and other hardware is mainly to determine the installation position, and the height position that is most suitable for the family can be, rather than just looking good.

5. House cleaning.

A custom wardrobe is different from finished furniture, a lot of things are installed in your home, and there is bound to be some work such as punching, cutting, etc., so there is bound to be some sawdust and dust generated.

6. Decoration pipelines.

Decoration pipelines in the wall: The installation of custom wardrobes is very similar to the overall cabinet, there are also hanging cabinets, sometimes heavy equipment such as electric hammers are used, if you don't know the pipeline in advance, there will be a possibility of breaking the line and water pipe. Lost.

7. Post-installation testing.

After installation, check whether the whole is consistent with the design plan, whether the pattern of the inner sock riser is consistent with the plane plan, and whether there are surface bumps and scratches. For example, whether the handle is missing, whether the opening and closing of each door is smooth, and how the gap between different shapes is.