How to use Apple wired headphones for Mac

Method steps.

First of all, every new iPhone now comes with an earpods, that is, the original headphones, which provide reliable call performance Convenient in-line control As a bonus headset to listen to songs, the sound quality will not pull the crotch, we just need to plug it into the charging and data transfer interface of lightning to use Apple's own wired headphones;

How to connect Apple wired headphones.

So for the current general wired headphones, we only need to buy the Apple headphone adapter on the Internet (usually buy Apple will give it), and operate it according to the corresponding socket, which can be used to listen to songs with wired headphones.

How to connect Apple wired headphones.

How to connect Apple wired headphones.

How to connect Apple wired headphones.

You have to use that Apple phone cable to match that headphone cable.

In this case, it must be connected through the line, and there is no problem at all, and its model is OK, and the effect achieved is also very good.

I think if you want to use Apple's expiration date, you can just restart it.

Hello, you have to see if its headphone jack is the same as the jack of Apple's headphones, the same can be used.

Unless the plug of your machine is quad-core, Apple can use it if it has a plug for headphones.

Hello, follow the instructions to go up. Or call the after-sales customer service, and they will deal with it as soon as possible.

This is to sell, if it is with an Apple camera, then it is to carry out that iCloud today.

This pinyin doesn't know how to use Apple wired headphones, so you give after-sales service ** and ask him.

MVC How to use Apple wired headphones to buy it directly.

Tools: iphone13, system gear to set the center.

1. Enter the phone's settings page and click to enter the phone's settings page. This is shown in the figure below.

2. Enter the general page of the mobile phone on the settings page, as shown in the figure below.

<>4. Find the audio call method on this page and click the option to enter. This is shown in the figure below.

5. Then select the Bluetooth headset, so that you can set the ear lap weighing machine mode. This is shown in the figure below.

1. Enter the phone's settings page and click to enter the phone's settings page.

2. Enter the general page of the mobile phone in the settings page, as shown in the figure below.

<>4. Find the audio call method on this page and click the option to enter. This is shown in the figure below.

5. Then select the Bluetooth headset, so you can set the headset mode.

The first step is to turn on and unlock the iPhone as shown in the figure below

Step 2: Then find the button of the settings on the desktop of the iPhone and click to open it, as shown in the figure below

Step 3: Find the Bluetooth function in the settings and click to turn it on, as shown in the figure below

Fourth, at this time, you need to open the cover of the Bluetooth headset and press and hold the small button behind the Bluetooth headset, as shown in the figure below

Step 5、In this way, you can see the xx airpods that will be displayed on the phone, so that you can connect and use.

Hello, I am Mr. Wang, the main Q&A, I have seen your question, and I am sorting out the answer, and I will reply within five minutes, please wait a while

Go to the Home screen. Place your AirPods in the charging case, open the case, and hold it near your iPhone. A setup animation will appear on your iPhone.

Tap Connect. If you have AirPods Pro, read the next three screens. If you have AirPods Pro or AirPods (2nd generation) and you've set up "Hey Siri" on your iPhone, "Hey Siri" now works with AirPods.

If you have AirPods Pro or AirPods (2nd generation) and you haven't set up "Hey Siri" yet, you'll be guided to set it up. Tap Done.

Questions. It's that my headphones weren't there before, and then I bought one on Xianyu, but I've found the one that isn't there now, and I'm going to get it.

I put the old one in the compartment and it kept flashing orange.

It's been flashing orange, and the charging compartment is out of power.

Charge. Charge [cover your face].

You put both earphones in the compartment and reset the Bluetooth link.

Questions. But when I took the headphones out, he went green.

Oh, that's a malfunction of the headphones.

It's all like this or just like that.

Questions. It doesn't matter which one I take.

And after I unconnected the bluetooth, the link couldn't be connected [covering my face] [incomprehensible].

Press and hold the back key, for about 5 seconds, the orange light will turn white, close the lid, turn it on again, press and hold the key again, and the phone will have a connected interface, just operate it as if it was just activated. If it doesn't work once, press the back key a few more times.

Try a few more times. Step1: Put only the left ear in the box, long press the reset button until the white light flashes, Bluetooth is turned on and connected to your iPhone, named "Left"Step2:

Put the left ear outside, leave him alone (but keep it "connected" to the phone's Bluetooth); Step3: Put only the right ear in the box, long press the reset button until the white light flashes, link to the iPhone, name it "Right"Step4: At this time, "Left" and "Right" should be connected, both wear on the ear, put a song, and keep (at this time, only one earphone has sound).

Step5: Ignore the links of "left" and "right" in the Bluetooth of the phone, and put the "left" and "right" earphones together in the box, press and hold the reset button until the white light flashes, and the Bluetooth is turned on and connected to the iPhone, and the name is "Merge".

Try this. Questions.

Why can't he still flash orange light [cover his face] [cover his face] [cover his face].

Are both headphones original? The headset firmware is the same.

The analysis can be carried out as follows:

1. This is a mismatch between Apple headphones and computer headsets. This 1 will occur if some of your computer's connectors don't handle compatibility well.

3. There are 4 earphone plugs, 3 ordinary earphones, and the other is for connection.

1. Enter the phone's settings page and click to enter the phone's settings page.

2. Enter the general page of the mobile phone in the settings page, as shown in the figure below.

<>4. Find the audio call method on this page and click the option to enter. This is shown in the figure below.

5. Then select the Bluetooth headset, so you can set the headset mode.