Why can t I find Bluetooth when Apple mobile phones use Bluetooth headsets?

There is a possibility that no one is near you to turn on Bluetooth, or it may be due to network reasons, you can try the following methods to solve it.

The Bluetooth of Apple products can generally only connect to peripherals and cannot transfer files. So you can't search for other phones, it's always in a search state. However, it is still very convenient to use products such as Bluetooth headsets, Bluetooth speakers, and Bluetooth keyboards.

Workaround: Click Settings.

If the available device keeps spinning or you can't find the Bluetooth device, turn off Bluetooth and wait for a while to start or turn off the phone and restart. There is also a possibility that maybe there is no one near you who has Bluetooth on.

<> may be a problem with the Apple system, it is recommended to upgrade the system.

If you still can't connect, turning on Bluetooth will find the device you've connected.

The connected device was canceled.

You can also turn it off and then restart it.

According to the sanku bluetooth headset I use, the connection method of the bluetooth headset is generally as follows:

1.Turn on the one-button power on in the state of power off, and wait until the red and blue lights flash alternately, 3After the connection is successful, it can be used normally.

You can see if the headphones are original, and you can also see if the Bluetooth of the mobile phone is turned on.

Apple can't pair the Bluetooth function.

1.Bluetooth headphones do not enter pairing mode: Many Bluetooth headphones need to enter some kind of pairing mode to pair with other devices, and can usually be entered by long-pressing a certain button.

Please check the manual of your Bluetooth headset to confirm the correct operation method to enter pairing mode. 2.Bluetooth function is not turned on or turned off:

If your iPhone's Bluetooth function is not turned on or turned off, your phone will not be able to search for Bluetooth devices. After turning on the Bluetooth function of your phone, you need to swipe on the list area to refresh the list when searching for devices. 3.

The pairing list is full: Only a limited number of pairing records can be stored in the Bluetooth pairing list of iPhones. When the number of pairings exceeds the storage capacity of the device, your iPhone may not be able to search for new Bluetooth devices.

Please try deleting the old pairing history so that your Apple Potato phone can search for a new device again. 4.Bluetooth device and phone are too far away:

If the distance between you and the Bluetooth device is too far, such as outside the Bluetooth range, your iPhone may not be able to search for the Bluetooth device. Try moving closer to your device or putting your headphones in pairing mode and keeping them close to your phone.

Dear, please refer to it: 1. The Bluetooth headset has been connected to other devices. If the Bluetooth headset has been paired with another device (such as another phone or computer) and connected successfully, it may cause the iPhone to not be able to search for it.

2. The Bluetooth function is not turned on. Before using a Bluetooth device, you need to make sure that your iPhone has Bluetooth turned on. Please check in the settings menu to see if the Bluetooth option is turned on.

3. The Bluetooth version does not match. If your iPhone and Bluetooth headphones are not compatible with the Bluetooth version, it may also cause them to not be able to pair. Please check the Bluetooth version that your phone and headphones use or envy and make sure they match.

If none of the above methods can solve the problem of shirt shooting, it is recommended that you try restarting your phone and earbuds and then try to pair them again. If the problem persists, contact the Bluetooth headset manufacturer's customer service center for additional help and support.

The Bluetooth headset can't be found on the Apple phone, you can try the following ways before connecting:

1. Confirm whether the Bluetooth device is powered on.

2. Confirm whether the Bluetooth device has enough power.

3. Confirm whether the [Bluetooth] function is turned on in the [Settings] - [Bluetooth] function on your iOS device.

4. Turn your iOS device back on once.

5. Turn the iOS Bluetooth function off and on again.

6. Confirm whether the Bluetooth device is compatible with iOS.

7. Stay on the Bluetooth setting page and confirm whether there is a display.

8. The pairing method of different Bluetooth devices may be different, it is recommended to refer to the manual to confirm whether the Bluetooth pairing operation is correct.

9. Upgrade the iOS system.

How to connect to Bluetooth

Under normal circumstances, when the Bluetooth headset enters the pairing state, as long as you continue to press and hold the power button for about 10 seconds without letting go, the earphone will change from power-off to power-on and then to pairing, which is manifested as the headset indicator (always on). At this time, use your phone to search for Bluetooth settings, and you can find your headphones.

Some headphones have complicated factory settings. Some people need to turn on the headphones first and then press and hold the + and - symbols at the same time for about 10 seconds. At this point, the indicator light will flash red and green alternately, allowing you to search for Bluetooth devices with your phone.

Some earphones are powered on and press and hold the power button and + sign for about 10 seconds, and other steps are the same as ordinary earphones.

Once the headphones are paired, the phone should search for Bluetooth devices. Generally, the mobile phone can search for the headset in about 5 seconds, select the Bluetooth headset device you find on the phone, and the mobile phone will prompt you to enter the password. Most mobile phone passwords are 0000 or 1234, but some are specially set by the manufacturer and will be recorded in detail in your earphone manual.

When your phone searches for headphones, and you enter the password correctly, it does not mean that your phone can be answered with Bluetooth headsets**. Nowadays, many mobile phones need to connect headphones after finding a Bluetooth device. If your phone is not connected to the headset in the settings, it still can't be connected**.

Of course, there are also some mobile phones that do not need to be connected to headphones separately. As long as the pairing is successful, the phone will be intelligently connected to the earphones.

Bluetooth headset is a small device based on Bluetooth technology, which only needs to hide this lightweight device next to the headset without directly using communication equipment (mobile phone, computer, etc.) to achieve free talk.

1. First of all, please check the indicator light of the Bluetooth headset to see if it is flashing. If the Bluetooth headset does not have enough power, it will automatically shut down. At this time, please use the charger to charge the Bluetooth headphones, and then turn on the device to connect with the iPhone, although this situation is not common, but it is still easy to encounter.

2. If you can turn on normally after charging, but you still can't connect with your iPhone, please open the "Settings" app of your iPhone, find the "Bluetooth" option in the settings list, and click to open it.

3. Then in the Bluetooth list, find the Bluetooth headset that has not been successfully connected with the mobile phone, and click "! option, and then tap on the "Ignore this device" option.

4. Then you need to click the "Ignore Device" button again. Next, please refer to the operating instructions of your Bluetooth headset to let the headset enter the pairing state, and let the iPhone and the Bluetooth headset pair again.

5. Under normal circumstances, press and hold the on/off button of the Bluetooth earset for more than 5 seconds, and see the indicator flash, which means that it has entered the pairing state. Then go back to the Bluetooth settings interface of your iPhone, find your headphone model, and tap to pair and connect with it.

6. It is also possible that the Bluetooth headset has a hardware failure. You can try to use your iPhone to connect to other Bluetooth headsets, if everything is normal, you can determine that there is a problem with the Bluetooth headphones, and it is recommended to send the Bluetooth headphones for repair and inspection.

There are two reasons for this:

Reason 1) The Bluetooth headset is broken or the Bluetooth function on the phone is broken.

Reason 2) Your phone's Bluetooth is not turned on or the Bluetooth headset is not connected.

Correct Bluetooth headset pairing method:

The Bluetooth headset is powered off first, then press the power button until the red and blue lights flash each other, and then tap to pair on the phone.

Model: Apple 7.

System: ios13.

Tool: Bluetooth headset.

1. Unlock your iPhone7 to the home screen page and open Settings.

2. In [Settings], select [General] function.

3. Go to the menu bar of the [General] function and find the [Reset] setting.

4. In the management settings page of [Restore], select [Reset Network Settings].

5. Enter the 6-digit password according to the system prompts to authorize [Reset Network Settings].

6. After resetting the network settings, press and hold the [Power Button] on the side of the iPhone7 to shut down and restart.

7. After resetting the network settings and restarting the iphone7 phone, press and hold the bottom of the iphone7 screen and swipe up to evoke the [Control Panel] to open [Bluetooth].

8. Press the [Home button] to return to the main page and open [Settings].

9. After entering [Settings], open the [Bluetooth] settings.