Which friend knows how to replace the filter element of the direct drinking water dispenser

The replacement of the water boiler filter element requires the original filter element, equipped with small tools, mops and other tools and raw materials. First of all, turn off the power to ensure safety. Then, with the help of a small tool, remove the filter barrel.

After removing it, pay attention to a small gasket, which is generally black. Replace the old filter and replace it with the new one. There is also a transparent gasket on the filter, so don't get rid of it, if you don't, the effect will be much reduced.

Then put the gasket on the side of the water outlet, before installing the filter element, rinse the new filter element with clean water, and use a small tool to install the filter barrel in place.

Finally, open the water inlet, turn on the power, put water for one to two minutes, check if there is any leakage, if not, the water boiler filter is installed.

Of course, the first step is to cut off the power supply, then open the water outlet of the water boiler, drain all the remaining water in the water boiler, and then close the water outlet. Then open the lid of the water boiler, add white vinegar to the water boiler, the dose can be increased according to the volume of the water boiler, generally wall-mounted one bottle of white vinegar, standing can use two or three bottles of white vinegar. Because most of the current water boilers are stainless steel designs, a small amount of white vinegar will not have a noticeable effect on the water boiler.

After adding an appropriate amount of white vinegar, the water enters the machine so that the water level indicator points to the upper water level of the water boiler device, to the maximum capacity, and then soaks for about five hours.

After five hours of waiting, most of the limescale in the water boiler was dissolved by white vinegar, and then the water in the machine was drained, and the clean water was put in and rinsed again. If there is too much limescale, you can soak and wash it several times until the water quality meets your requirements, so that the water coming out of the water boiler is no longer cloudy and you can drink it safely.

With the increasing importance of drinking water quality, people have purchased direct drinking water dispensers to treat the water quality. As we all know, we can drink healthy and safe drinking water should be attributed to the filter element in the direct drinking water equipment, so the filter element plays a very big role in the process of purifying water quality, and in order to ensure that we have a healthy drinking water environment, the filter element should be replaced regularly, but some people may have questions, what are the effects if the filter element of the direct drinking water machine is not replaced for a long time?

1. Increase maintenance costs and cause machine scrapping.

The filter element has a lifespan, and if it is not replaced in time when used for a certain period of time, it will have a profound impact on the water dispenser, which will affect the filtration effect and reduce the amount of water (permanent), which may seriously lead to abnormal operation, scrapping the machine, and thousands of yuan invested into running water.

2. The water yield decreases, the filtration effect becomes poor, and it is easy to cause secondary pollution of water sources.

Is it that some users find that the water yield is reduced in the process of using the water dispenser, and sometimes there are some impurities left in the water. This is because the filter element has reached the end of its life cycle, and the filtration effect of the water has deteriorated, and there has been a blockage. If it is not replaced in time, this phenomenon will occur, which may seriously cause secondary pollution of water sources and endanger health.

3. It may lead to the growth of bacteria in the machine.

The water source is always in a flowing state, and the formation of pollutants is naturally a chemical reaction caused by long-term contact with the flowing water. If the filter element is not replaced for a long time, contaminants will be clogged in the surface layer, and it is easy to react with the water for too long, breeding more bacteria, so it is very important to replace the filter element regularly.

Precautions: 1. No matter what type of water dispenser is used, you must buy a water dispenser equipped with a leakage protection switch when purchasing, and connect it with a firm and reliable bottom line when using it, so that even if leakage occurs, personal safety will be guaranteed. 2. For compressor type refrigerated water dispensers, they should be kept upright when moving, and the bevel angle should not be greater than 45 degrees if they are to be tilted.

When using the refrigeration power supply, it must take 3 to 5 seconds to start again, and when the indoor temperature is lower than 10 degrees, it is advisable to turn off the refrigeration power supply. 3. Do not use too much force when pressing the faucet to receive water, and the part that is rotated by hand will come out or be damaged. 4. Do not put the metal rod into the back plate ventilation window, so as not to damage the fan or cause electric shock; Do not cover the fan ventilation window to avoid damage to the semiconductor cooling components due to poor exhaust and poor heat dissipation.

In order to make the water quality safer and healthier, the direct drinking water dispenser needs to be cleaned regularly. How often should a direct drinking fountain be cleaned? The cleaning time of the direct drinking water machine depends on the actual use of the home, if it is used frequently and there is more water sediment, it should be cleaned frequently, so as not to affect the use of the inner cup fouling; Otherwise, you can wait a little longer, but it is best to clean it up every six months.

Disinfect it after each cleanup. It is recommended that the cleaning of the drinking water dispenser should be carried out every three months to ensure the health of the drinking water of the user. At the same time, the surface of the direct drinking water dispenser should be cleaned with neutral cleaning liquid, and acidic and alkaline cleaning liquids should not be used, so as not to corrode the outer wall of the direct drinking water dispenser and affect the appearance.

When replacing the filter element of the water dispenser, you need to first turn off the power of the water dispenser, unplug the socket, and then remove the filter barrel of the water dispenser with the help of a disassembly tool. After removing the filter barrel of the water dispenser, there is usually a small black gasket on the filter barrel, which cannot be lost, it must be put away, if it is missing, the filter element will not be installed well, and it will leak when used.

Generally, remove it and pay attention to a small gasket, generally black to replace the old filter element, replace the new one, there is also a transparent gasket on the filter element, don't lose it, if there is no effect, it will be reduced a lot.

That is, when we replace such a filter element, we must choose the original filter element, otherwise the replacement time must be shorter, so as to maintain the freshness of the water quality.

I believe that we all know very clearly, and many people also have water dispensers in use, which can facilitate our daily drinking water, and it is also very convenient to use. The filter element of the water dispenser is one of the more important ones in the water dispenser, which is directly related to the filtration problem in the use of the water dispenser. Although many people are using water dispensers in their homes, they do not know very well the frequency of water dispenser filter replacement, so I will introduce to you the frequency of water dispenser filter replacement, I hope it will help you, if you are also using water dispensers in your home, you can take a look.

The survey shows that at present, some users choose products below 150 yuan to replace the filter element. In the survey, many users complained that the maintenance cost of the water purifier was too high in the later stage. In this regard, industry experts said that manufacturers need to increase research to reduce costs as much as possible and solve consumers' worries.

The service life of the filter element is generally about how much water can be filtered, not about time. The amount of water filtered according to the energy. Based on the daily water consumption, you can calculate how much time you can use.

If the water quality is not good, reduce the amount of filtration. Since you didn't say what kind of filter it is, I can't make up my mind. Replacement intervals vary for each type of filter.

PP cotton, usually only three to six months of appearance, activated carbon can be more than a year.

When changing the filter, soak it in warm water, and after a few minutes, wrap it in a dry towel and wring it down. The thread direction is the same as the thread direction of our regular cups. The filter cartridge of this water dispenser generally has a service life of three years.

So, after three years or close to three years, the filter cartridge can be replaced. When using this water dispenser, care should be taken to clean the filter cartridge and the sediment that heats the refrigeration chamber on time.

1. Separate the upper and lower sections of the filter element, and use a clean new toothbrush to brush the surface of the filter element while rinsing the upper filter element (ceramic) with clean tap water;

2. When the upper filter element is filled with about half a pot of tap water, shake the filter element up and down several times to pour out the remaining water, which can be reciprocated several times to make the micropores of the filter element unblocked.

3. Fill the lower filter element with tap water, pat the mouth up and down with the palm of your hand, shake the lower filter element, and make the tap water clean the filter material, repeat it several times until the tap water flowing out of the lower filter element is clear, clean and heat the cooling room: Fill the water in the upper container of the water dispenser (do not need to fill it), unscrew the drainage plug, use the basin to catch the water flowing out of the drainage hole, and repeat it several times.

If we are not clear about the replacement of the filter element of the water dispenser, the above introduction of the article on the replacement frequency of the filter element of the water dispenser will definitely help us better understand the replacement of the filter element of the water dispenser. The use effect of the water dispenser has a great relationship with the filter element, so we can have an understanding of these related knowledge of the water dispenser in our daily life, so that we can effectively improve our use effect and ensure the safety of our drinking water.

I believe that everyone will have a water dispenser at home, and the emergence of the water dispenser perfectly solves the problem of our convenience of drinking water. In fact, the water dispenser can make us drink clean water without the water dispenser filter element, you don't know what the water dispenser filter element is? It can be said that the water dispenser depends on the filter element to have clean water for us to drink, but the filter element has a working time limit, you may have to ask how often the water dispenser filter element is replaced, don't worry, this article will answer these questions and tell you how to replace the water dispenser filter.

1. How to change the filter element of the water dispenser.

1. At this time, put the gasket on the side of the water outlet, and before installing the new filter element, you need to rinse the new filter element with clean water, and then re-install the filter barrel.

2. When replacing the filter element of the water dispenser, you need to turn off the power of the water dispenser first, and then remove the filter barrel of the water dispenser with the help of some tools.

3. Unscrew the filter barrel, take out the old filter element in the barrel, and take out the new filter element and replace it. Generally, there will be a transparent gasket on the filter element, and this cannot be lost.

2. What is a water dispenser filter?

The filter element will be installed in the direct drinking water dispenser, what kind of role does the water dispenser filter play in the process of water production? When the liquid enters the device equipped with the filter element, the impurities contained in the body will be blocked, and the filtered liquid will flow out through the filter element to make the contaminated liquid reach a clean state to meet people's daily needs.

3. How often should the filter element of the water dispenser be replaced?

In the water dispenser, it comes with a filter, but after a long period of use, the filter element in the filter will be contaminated by the bacteria accumulated for a long time, so the water dispenser with a filter needs to be replaced regularly, and the water dispenser also needs to be cleaned regularly, generally once every 1-2 months.

How to change the filter element of the water dispenser.

1.When replacing the water dispenser filter element, you need to turn off the water dispenser power first, and then use some tools to remove the water dispenser filter cartridge barrel.

2.Unscrew the cartridge cartridge, take out the old cartridge in the cartridge, and replace it with a new cartridge. Generally, there will be a transparent gasket on the filter element, which cannot be lost.

3.At this point, place the gasket on the side of the spout. Before installing a new filter, rinse the new filter with clean water and then replace the filter.

What is the filter element of a water dispenser.

The filter cartridge will be installed in the direct drinking machine. What role does the filter element of the water dispenser play in the process of water production? The filter element of the water dispenser can remove solid particles contained in liquid or air during use.

When the liquid enters the device with the filter element, the impurities contained in the body will be blocked, and the filtered liquid will flow out through the filter element, so that the contaminated liquid can reach a clean state and meet people's daily needs.

How often should the water dispenser filter be replaced.

The water dispenser comes with a filter, but after long-term use, the filter element in the filter will be contaminated by bacteria that have accumulated for a long time, so the water dispenser with the filter element needs to be replaced regularly, and the water dispenser also needs to be cleaned regularly. Water dispensers are generally cleaned once every 1-2 months.