The bottom of the refrigerator is unstable, can I move the bottom a little and charge it immediately

As long as it is not tilted, it can be charged.

You should level the refrigerator and fix it. Under normal circumstances, the refrigerator has a power outage, and the movement should be stable for half an hour before it can be started!

As you said, just move it a little, the compressor does not move much, it can be powered on immediately, there will be no problem. As you said, just move it a little, the compressor does not move much, it can be powered on immediately, there will be no problem.

No problem. Moving it has no effect on the refrigerator, and it is good to flatten the bottom pad to reduce vibration. After moving, it can be energized immediately.

Yours is a refrigerator, do you want to charge it? The refrigerator can be shifted for a short distance, so there is no need for power outages. If the power goes out after you have unplugged it, then after moving the position, stop for a few minutes and plug it in.

As long as you don't dump it, moving it won't have any effect.

Yes, there is no problem if it is not tilted.

Yes, if you move it slightly, it shouldn't have any big impact, and charging it immediately won't affect the normal operation of the refrigerator.

Is it right that the refrigerator can't be used immediately after it is bought, as if it will take a few days to turn on the electricity?

Shangpin home delivery. Whole house furniture customization is Shangpin home delivery!

Follow to become the 662nd fan.

The refrigerator is a very commonly used household appliance in our daily life, and almost every household has it. In the winter, the refrigerator is not as useful, so should the power of the refrigerator be turned off?

Figure (1) The refrigerator can be powered off, but the time should not be too long.

If the refrigerator is not in use, it will not be affected if the power is cut off for less than three months, and if it is not in use, it will be damaged. There are iron pipes in the refrigerator, and the iron is easy to rust after encountering water, and even if there is protective paint, there will be rust. When the refrigerator is powered on, the iron pipes inside will not rust.

If the refrigerator is without electricity all the time, then the inside of the tube will slowly corrode.

Figure (2) If we don't use the refrigerator, how should we maintain it so that it is not easy to be damaged.

1. The refrigerator should be cleaned regularly, first remove everything in the refrigerator, open the refrigerator door, and use a rag to clean the mold inside the refrigerator to keep the inside of the refrigerator clean.

2. If the refrigerator is not used in the short term, seal the refrigerator door with paper; If you are not going to use it for a long time, seal it with lime powder.

3. When the refrigerator is not in use, it cannot be wrapped in a plastic bag, which is a wrong practice. There is water vapor in the air, and if the plastic bag is used for a long time, the refrigerator is most likely to be damaged in a humid environment.

Figure (3) 4, without using the refrigerator, set the temperature of the refrigerator at zero degrees, or the maximum value, which can prolong the life of the refrigerator.

5. The best way is to turn on the power once a month, and the compressor in the refrigerator will be in a running state, which can also extend the service life of the refrigerator.

Disclaimer: Some of the **** in this article is used in part of "Oriental IC", and any newspaper, newspaper, television station, company, organization, or individual may not use it in part or in whole without the permission of Oriental IC. Other **** networks, if they involve infringement, please contact the author to deal with and delete.

The refrigerator should not be used immediately, but it does not need to be left for that long, as long as it is left for 2 to 3 hours.

Here's why:

1. In fact, this is because the compressor of the refrigerator refrigeration system needs lubricant protection when it is running, and under normal circumstances, the manufacturer will put a certain amount of lubricating oil in the refrigeration system and seal it inside. During the refrigerator transport, the resulting bumps cause the lubricating oil to flow into the coils of the heat exchanger.

2. When encountering severe bumps, tilting will occur, so that the lubricating oil may flow into the cylinder of the compressor. Immediately after delivery, the lubricating oil in the pipes will block the flow of refrigerant and will also affect the normal operation of the compressor.

3. The serious consequences will cause the lubricating oil to hit the cylinder and paralyze the operation of the refrigerator. Therefore, after placing the refrigerator, please wait 2 to 3 hours to allow the lubricant to settle completely.

Precautions for refrigerator maintenance:

1) The refrigerator should be cleaned regularly (at least 2 times a year). When cleaning the refrigerator, first cut off the power, use a soft cloth dipped in water or dish soap, scrub gently, and then dip it in water to wipe off the dish soap.

2) In order to prevent damage to the coating layer on the outside of the box and the plastic parts inside the box, do not use laundry detergent, detergent, talcum powder, alkaline detergent, Tianna water, boiling water, oil, brushes, etc. to clean the refrigerator.

3) When the accessories in the box are dirty and dirty, they should be removed and cleaned with water or detergent. The surface of the electrical parts should be wiped with a dry cloth.

4) After cleaning, plug in the power plug firmly and check whether the temperature controller is set in the correct position.

5) When the refrigerator is not used for a long time, the power plug should be unplugged, the inside of the box should be wiped clean, and the door of the box should be closed after the box is fully dried.

The refrigerator can't be used immediately after being bought, and it usually takes about 3 hours to wait. After the refrigerator is made, the refrigerant is completely enclosed in the refrigeration system, and the transportation and handling of the refrigerant will run along the pipeline, and the immediate start-up may cause damage to the refrigerator. No manufacturer will sterilize the refrigerator, and it is basically a simple cleaning.

Therefore, you can disinfect the refrigerator while you are waiting. This is also a homework that needs to be done after using it for a while.

Many consumers will have some questions about the use of more or less

The main reason why refrigerators cannot be used immediately after buying them is because of the lubricating oil of the refrigerator refrigeration system.

We know that the operation of the refrigerator compressor needs to be protected by lubricants, so the manufacturer fills the refrigeration system with a certain amount of special lubricating oil during the production process, and the lubricating oil and refrigerant are completely enclosed in the refrigeration system after the refrigerator is completed.

When the appliance manufacturer delivers the new refrigerator to your home, the refrigerator brought from the warehouse has already gone through hours of bumps, movement and even tilting, and the lubricating oil in the refrigerator will flow into the coil of the heat exchanger along the pipeline; A small amount of lubricating oil is also poured into the compression chamber of the compressor – the cylinder – under the action of jolting and vibration. If the machine is started and running at this time, the flow of refrigerant will be directly affected due to the obstruction of lubricating oil in the pipeline; Second, because the function of the cylinder is to compress the gaseous refrigerant, if there is a certain amount of lubricating oil in the cylinder, it will affect the work of the compressor, and the cylinder will be completely damaged by liquid shock, so that the refrigerator refrigeration system will be paralyzed.

It is best to leave the refrigerator for 6-10 hours before turning it on.

Reason: Specifically, because the refrigerator will tilt and bump during handling, then the refrigerant on the other side of the compressor may enter the capillary tube and evaporator. So it needs to be set still.

2: I can tell you very responsibly that no manufacturer will disinfect the refrigerator specifically, and it is basically a simple cleaning. So you can wipe it with a cloth first, which is also a homework to be done after using it for a period of time.

However, due to the construction of many evaporators, it takes a long time to return to reflux, so it is better to wait a lot.

3: After the power is turned on, you can put things immediately, the refrigerator will adjust the temperature according to whether there is a physical object in it, if you put it again after a while, the refrigerator will adjust the temperature again, mainly because it will cost electricity. In fact, it has little effect on the day and the next day.

Yes, it can't be used immediately, you can let it stand for 6-10 hours before turning it on.

Don't turn on the new refrigerator immediately, do these 3 things well, the refrigerator has a good cooling effect and a long service life.

It's right that the refrigerator can't be used right away.

It makes sense, but it basically doesn't have much of an impact. If you want to buy a refrigerator, when the manufacturer sends it, you have to debug it, how to say that the quality is no problem if it is not powered. I don't see the power outage after the power is turned on. So it's basically fine.

Operate according to the manual, generally more than 30 minutes. Thirty minutes is already conservative, you think that the freezer is a liquid, and the refrigerator will soon stand still after it is balanced.

There is also a lower temperature limit of 15° for fast charging

The mobile phone battery is frozen in the refrigerator and cannot be charged immediately, otherwise it will cause **.

How to care for your mobile phone battery:

1.The battery does not need to be charged for too long and can be removed when it is fully charged.

2.It is best to only use the charger that was originally supplied by the manufacturer when you purchased the machine.

3.The contacts of the battery do not come into contact with metal or oily fittings, and pay attention to moisture-proof.

4.Batteries should never be immersed in water or thrown into fire.

5.Do not place batteries near low- or high-temperature objects, such as refrigerators and stoves.

6.When handling batteries, use special facilities.

7.If you need to change the battery, please use only the same type of battery.

8.Battery life is calculated based on charge-discharge cycles.

1 The packaging must be in, the outer packaging is complete, there are no traces of scribbles, 2 There are no traces of appearance, some protective strips must be in, 3 Some smart home appliances can be checked for the number of power-on times, and they cannot be activated.

If the assembly affects the secondary sales, it cannot be returned or exchanged. Or make up a certain fee.

Regular manufacturers of electrical appliances are seven days or 15 days no reason to return or exchange.

It's best not to turn on the electricity right away.

If it has been left idle outside for a winter, at least clean the inside of the refrigerator, and at the same time move the refrigerator indoors for a period of time, so that the liquid refrigerant accumulated in the compressor can evaporate properly to prevent liquid shock and damage to the compressor when the compressor starts. At the same time, all the electrical wiring of the refrigerator should be checked to see if there is any abnormality.

Wow, how do you put the refrigerator, I'm not afraid of breaking it, I can't charge it.

No, it can be left in the sun.

If it is a car refrigerator, it is fine, and if it is a household refrigerator, you must add a set of inverter devices. The refrigerator cannot be charged, it only needs to be powered in real time.

There is nothing wrong with the phone charging can be plugged into the refrigerator.

It's just that the outlet of the refrigerator is generally against the bottom of the corner. The phone is not easy to plug in.