-
Anonymous users2024-02-11Unpack the sound card, take out the sound card, and follow the steps below to install it:
First, turn off the machine, disconnect the power supply, and face the front panel of the machine.
Open the left bezel.
Remove the screws by hand or with a screwdriver.
Pull the left bezel down.
The internal structure of the chassis.
Locate the PCI slots (both white in the picture are PCI slots) and remove the baffle behind the machine that is aligned with the PCI slots.
Align the gold finger of the sound card with the PCI slot.
Insert the sound card in parallel and firmly fix it, and remember: be sure to plug it in tightly!
Tighten the screws at the panel.
The sound card is installed.
Secure the left panel of the chassis and tighten the screws.
-
Anonymous users2024-02-10Tutorial on connecting a sound card to a computer. This one is connected. We don't know how to do it. The road is not very good. The connection is not very good.
-
Anonymous users2024-02-09If your sound card is connected to a computer, you can ask customer service if you don't know how to do the tutorial.
-
Anonymous users2024-02-08In the case of a match, I can just do an operation according to the time, and there is no problem.
-
Anonymous users2024-02-07Taking the win10 system as an example, the method of connecting the desktop computer to the sound card is as follows:
Method. 1. Connect the external sound card to the computer
1. First of all, turn off the computer and disconnect the power supply;
2. Take the front of the main chassis as the standard, and use a screwdriver to remove the baffle on the left side of the main chassis;
3. Observe the internal structure of the chassis and find the PCI slot; Remove the baffle at the rear of the PCI slot machine;
4. Then, align the golden part of the sound card with the PCI slot, insert the sound card at a parallel angle, and fix it;
5. Finally, tighten the screws at the panel, and the connection of the sound card is installed. After the installation is completed, the left side baffle can be fixed.
Method. 2. Install the sound card through the software
2. After the installation is completed, open the software and click the detection button of "Computer Installation and Driver Upgrade";
3. After the test is completed, click the install or upgrade button on the back of the sound card;
4. Subsequently, according to the steps of the sound card installation guide, complete the installation operation step by step.
After the sound card driver is installed or upgraded, restart the computer and the sound card driver can be used normally.
-
Anonymous users2024-02-06The specific operation steps for connecting an external sound card to a computer are as follows:
1. First connect the external sound card, microphone, headphones and computer.
2. After the above operations are completed, you can start to set up the computer system when there is no sound, and find the speaker button under the computer.
3. Then click the right mouse button and click the button of the recording device.
4. Jump out of the sound dialog box, right-click the "Microphone" in the recording options and check "Set as default device, set as default communication device". It's the microphone with the sound card on it.
5. Click "External Microphone" twice, click the Level tab in the pop-up dialog box, adjust the voice of the Mai Tuan Keck style, and click the OK button.
<>7. Click "Speaker" twice, the dialog box will pop up, click the level option, turn the microphone sound to the maximum, and click OK to confirm the sound microphone.
1.Right-click the speaker icon in the lower right corner of the computer screen, select **Device, right-click to set "Speaker 4-piq kx-2a" as the default device, and similarly select the "Recording" category of the dialog box, and set "Line 4- piq kx-2a" as the default device, as shown in the figure: >>>More
What should I do if my computer's sound card is broken? You may usually encounter this problem, don't be nervous, the reasons for the failure of the computer sound card are nothing more than a few, let us take you to analyze the causes of the failure of the computer sound card and how to deal with it. >>>More
1.Power amplifier: first check whether the appearance is damaged, whether the chassis and power cord are leakage; Then power on and listen, rotate each potentiometer to see whether the resistance is moderate and uniform, and whether the speaker makes noise when rotating; Then press each button to see if it is invalid and whether there is any noise in the speaker when pressed; Set the volume potentiometer at 9 o'clock and listen carefully to see if the volume of the left and right channels is balanced, whether the sound is noticeably distorted, and whether the style suits your taste. >>>More
A year and a half after the launch of the KX-2 network stage, Kesosi has launched the KX-2 Ultimate, the successor of the KX-2, raising its sound level and product quality to a new level. On the basis of the original KX-2A, the KX-2 Ultimate Edition adds a microphone midrange adjustment, and the addition of midrange adjustment makes the voice more fleshy, more intimate, more realistic, more natural, and easier to obtain various voice effects required by users. The KX-2 Ultimate has two knobs placed on the top of the case, the left to adjust the local monitoring volume, and the right to adjust the recording volume, which is the volume heard by the other party on the network. >>>More
It's not that simple, if you want to change it, you have to check how the original sound card and all the connection ports of the motherboard are, (if it's an integrated sound card, it's troublesome, but I haven't heard of a sound card with an integrated one.) Then confirm whether the sound card you want to replace is compatible with the motherboard, whether there is a problem with each interface, if there is no problem, you can start the replacement, but you must be careful. After replacement, you can start using it, and the headphone port can of course be used, as long as there is no wrong connection.