I asked, on the top floor of my house, will it have a big impact if the beam is broken by 10 centime

Of course, the impact of ten centimeters off the beam is great. Because the beam structure is made of steel coagulation and glue according to its force size, although it is 49cm high, if you knock off ten centimeters, it will destroy the structure of the beam and affect its stress. Therefore, even if you live on the top floor, the beams cannot be destroyed, and if you knock the beams off by 10 centimeters, your floor will be in danger.

If your home is on the top floor, if the beam is knocked off 10 cm, it will definitely have a certain impact, and you can't let the property know, if the property knows, it will fine you for recovery, you can do it quietly, there should be no problem.

It is not possible to determine whether the beams on the top floor of your home are the main stressed members. If it is the main stressed member, a 10 cm drop may affect the safety and life of the house. If the beam is not the main stressed member, it will not have much effect if it is knocked off by ten centimeters.

It is recommended that you get an assessment from a professional to make sure your house is safe.

It's best not to do this, because how high the beam is professionally calculated, and if you knock it off, it may affect the load-bearing, and there may be potential safety hazards.

Of course, there is an impact, the beam is the main load-bearing, plays a more important role, it is best not to have damage, if there is timely repair, the province brings unnecessary trouble.

The beam is a cement pouring frame, which is very important, if you knock off ten centimeters, the property will let you rectify, don't move!

This is basically impossible. Because of the concrete protective layer of the beams and columns. It is usually about 5 centimeters. After you hit 5 cm, you will see the steel bar, and the steel bar under the beam is under the tension of the weight. Do you want to take it off?

Although it is the top layer, it is best not to move the pouring body, and the overall structure is load-bearing with the pouring link, especially the beam, which is more important, which will cause potential safety hazards.

This beam also wanted to be knocked off ten centimeters.

It's so whimsical.

Knock off ten centimeters.

The bottom reinforcement under the beam is exposed, do you want to remove the bottom reinforcement of the reinforcement?

In that way, Ziliang will not be load-bearing, although you are the top floor, don't you want to be safe?

When the time comes, you will take responsibility for the whole building, you can do it.

It must have an impact, it is a bit too much to knock off ten centimeters, the beam is the support point of the house, the force is very large, and the knock-off also affects the decay of the steel bar, if it is a building high, it is more dangerous, for such a situation, if you are worried about finding a professional person to measure and calculate, it is the best.

Summary. Hello dear, <>

Those who live on the top floor and knock off the beams are responsible. 1. The beam bears the transverse load to maintain the stability of the building. To put it simply, the beams in the building are pulled by the pillars or walls on both sides to prevent the building from crooking from side to side.

2. If there is an accident after knocking off the beam, the consequences will be borne by the owner.

Is it responsible for breaking off the beams on the top floor?

Hello teacher. Hello dear, <>

If you break off the beams of the roof and close the building, you have to be responsible. 1. The beam bears the transverse load and takes the large crack, and maintains the stability of the imitation punching. To put it simply, the beams in the building are pulled by the pillars or walls on both sides to prevent the building from crooking from side to side.

2. If there is an accident after knocking off the beam, the consequences will be borne by the owner.

I didn't completely remove the beams.

Dear, it is recommended that you dismantle it as soon as possible.

It's safest this way.

Mine is the loft roof beam.

The design is 600 250, and I took the bottom of the beam 8 cm. The property is not working, is there a solution?

The best way is to quickly go to the property and ask them to find a way, and he will contact the construction company to deal with the problem and destroy the file. If you're lucky, you'll have to repair the load-bearing wall with pure blue.

Liang is more than 4 meters long, and he asked me for 100,000 yuan.

You can also find a construction company yourself. <>