What is the easiest way to restore the Rubik s Cube?

Use your head, think of a way, otherwise what else can you restore, you can also ask the Rubik's Cube master to help you.

You can take a look at the content of the Rubik's Cube station:

I learned to restore the yellow top according to the things in the Rubik's Cube station, but I can't remember the formulas of the 7 ways listed in the Rubik's Cube station, so I bought a Rubik's Cube of the Demon King, which is attached with a tutorial, and I learned to restore the ...... with the first few steps of the Rubik's Cube station and the last few steps of the Rubik's Cube tutorialI remember the fastest time I was in ...... forty seconds

Formula. If you are proficient in using formulas, you can also simplify them yourself.

Break it off one by one and put it back together.

The dumbest way to recover the Rubik's Cube is as follows:

Tool: Second-order Rubik's Cube.

1. First restore the bottom corners: this step is to restore the 4 corners of the bottom layer.

2. Use algorithm 1 to the right for white, turn to the right first, r u r2 r u r2.

3. Use algorithm 2 for white forward, turn the front first, f2 u2 f u f2 u2 f.

4. Repeat 4 corner blocks, and you can do a good job of the bottom layer.

5. Then restore the top color: this step is to restore the color of the top surface of the 4 corner blocks.

6. Situation 6 is to use formula 2-2 first, in other cases use formula 2-1 first, and in other cases use formula 2-1 first.

7. Then restore the top layer of the corner block: if there is a situation like this, rotate the corner block of the same color to the position facing you.

8. Use this algorithm again: r b2 r f2 r2 b r f2 r2 r2, and you can complete the restoration.

Follow these 7 steps to restore the Rubik's Cube:

Step 1: Restore the bottom cross.

Step 2: Restore the first layer.

Restore the bottom four corners, with the upper right corner as the benchmark, and the white punch to the right. Find the center block of the same color as the other faces of the white corner block, as shown in the figure, the final position of the white corner block is the area with a white background in the yellow box in the figure. The formula is: top right, top left, bottom right.

Restore the bottom four corners, take the upper right corner as the benchmark, and the white punch forward. In the same way, the formula is: top left, top right, top late brigade right, bottom right.

Restore the bottom four corners, take the upper right corner as the base, and wash up in white. In the same way, the formula is: top right, top right, bottom right. After that, determine which of and is used, and use the formula respectively.

In special cases, the bottom has been restored, but the sides are not the final result. Formula: Top Right, Top Left, Right, Bottom Right. After that, we will determine which of the previous cases is the case and then use the corresponding formula.

Step 3: Restore the second layer.

Position 1: The position of the top edge in front of you.

Formula: Top Left, Top Right, Top Right, Bottom Right, Top Right, Front Left, Top Left, Front Right.

Formula: Top Right, Top Left, Top Left, Left Bottom Top Left, Front Right, Top Right, Front Left.

Step 4: Restore the top void Dan to call the cross.

Step 5: Restore the top layer.

Before the B fish formula, you need to adjust the fish head to the lower left corner, which is not reflected in **, so you need to take a break.

Step 6: Adjust the order of the top corner blocks.

When there are no color blocks of the same color on all four sides, the top faces yourself, and the above formula is done on the right side of any face, and after the "eye" appears, repeat the formula.

Step 7: Restore the Rubik's Cube.

The side that will be restored will be backwards.

Formula (clockwise): Bottom Right, Bottom Right, Top Left, Top Right, Top Left, Bottom Right, Top Right, Bottom Right, Top Right, Top Left, Bottom Right.

Formula (counterclockwise): Top Right, Top Right, Top Right, Top Left, Top Right, Top Left, Top Right, Top Right, Top Right.

The easiest way to restore the Rubik's Cube:

1.First put the white block in the middle (the one with the rubiks logo) on it, and then make a white cross at the top, so that the other colored blocks are in the corresponding position.

2.Then it is to return the white corner blocks to their positions.

3.Then let the middle edge block be homed. Turn the white side downward, find the red and green side blocks, if the red and green edge blocks are on the top layer, then rotate the top layer in a clockwise direction until the side blocks are the same as the one in the diagram, and then turn the Rubik's Cube according to the formula to make the side blocks return to their positions.

If the red and green edge blocks are in the middle layer, but the position or color is wrong, first make the red and green edge blocks in the front right position, and then rotate them again in one of the following orders.

4.Then adjust the top edge block upwards to make a yellow cross. If the yellow cross does not appear on the top layer after 1 rotation of the formula, you can repeat the rotation until the yellow cross appears.

5.Then adjust the yellow corner blocks around the cross.

6.Usually at this time, the yellow block and the side color will be misaligned, and the yellow block at the four corners will be positioned according to the formula.

7.Finally, adjust the color blocks on the edge to the corresponding position.

Common Terms:

n-order: The order refers to the number of blocks common to the two adjacent rotating surfaces of the main part of the Rubik's cube, for example, there are 3 small blocks on each side of the third-order Rubik's cube, and there are 5 blocks on the two adjacent rotating surfaces of the pyramid cube, but there are only 3 blocks in the main part, so it is also third-order.

Restoration: refers to the process of going from a non-original state to an original state of the Rubik's Cube.

sub: The original text is "subtraction", the original meaning is "subtraction, less than", here it means "under xx seconds". Example:

3 3 blocks sub30, which means that the average speed is less than 30 seconds. The calculation method is to remove the fastest and slowest two times after 5 timing restorations and take the average value.

DNS: The abbreviation of "did not start" refers to the waiver of a recovery opportunity and the failure to start recovery, that is, abstaining before the start of recovery.

The simplest content of how to restore the Rubik's Cube is as follows:

First of all, we get the Rubik's Cube, and we must first put together one side, so how to spell it? The white and yellow of the third-order Rubik's Cube are opposite, so we first need to put together the white side, and first make a cross flower shape with yellow as the center point and white as the petals on the reverse yellow side.

After the cross floret is ready, we need to rotate the white to the white side corresponding to the yellow, and then form a white cross floret with white as the center point.

After getting it done, we unify the color of the white edge center block, and then find the white side with the white block in **, put the white side up, face yourself on any side, and find a way to move the white block to the lower right corner of the direction or right facing you, and then you can easily put the white side together. However, it is important to note that the position of the color of the edge color block should be consistent.

Put the white face down, put it in your hand, and start to spell the second layer, and the second layer has a mantra that I think works quite well for me, which is "cut back and pick up the child from school".

Understand what it means, and the second layer can be easily put together. The way to do this is to look at the color of the middle edge of the top layer, for example, the top of the middle edge is red and green, then if the green is on the left, you need to stay away from the green.

Rotate the upper layer in the opposite direction, rotate the fit on the right-hand side, and then turn it back accordingly, and the side of the second layer is right. The others are used in the same way.

If you want to put the last layer together, it's really not as easy as the first two layers, because he has many ways to change, and the methods are not the same.

After the second layer is ready, it is necessary to make a yellow cross floret centered on the top yellow side. Sometimes a yellow cross may appear directly after the second layer is made, and sometimes you need to turn it again.

After forming the cross, we rotate the Rubik's Cube according to the method of the little fish one. The method of small fish one is that the top Rubik's Cube rotates counterclockwise, and the rightmost Rubik's Cube rotates with each other, and after it is rotated, it really forms the shape of a small fish.

Then observe the position of the small fish, put the position of the head of the fish in the upper left, and then observe whether the color block on the far right and back is yellow, if so, and then operate again according to the technique of the small fish to complete the unification of the color block of the third layer.

The layer-first method is 7 stages to spell out the third-order Rubik's Cube (a total of 12 formulas only need to be memorized):

Bottom Cross (2 formulas) 2Bottom Angle (3 formulas) 3Middle Ridge (2 symmetrical formulas) 4

Top cross (1 formula) 5Top surface (2 symmetrical formulas)6Top Angle (1 formula) 7

Top middle ridge (1 formula).

If you don't want to be fast in the bridge type, as long as you memorize 6 formulas, most of them understand by yourself, and if you screw quickly, you will be cmll

CFOP has 119 formulas, basically only need to memorize 70, F2L understands it by itself.

The amount of zbll formula is huge, and Fei Shen has not memorized much.

I will restore the third-order Rubik's Cube, but the fourth-order will not, I don't know what level you are talking about.