What should I do if the earphones can t be used after the Apple 7 upgrade

Hello, I'm glad to answer for you: After the Apple mobile phone system is upgraded, the headset can't be used, and the solution is as follows; 1.Check whether the earbuds have sufficient power, it may be caused by running out of power, and then charge the earbuds.

2.Check whether the connection between the phone and the earbuds is stable, whether the distance is too far, and whether the connection is successful. When the connection is unstable, the earbuds will not respond, so you need to disconnect the connection between the earbuds and the phone, and then reconnect them.

If the connection is unsuccessful, the breathing light of the Bluetooth headset will be always on, and the Bluetooth connection can be turned on again. 3.Check whether there is a third device between the phone and the earphone, and if there is a third device connected to the phone, it will cause the earphones to switch devices between each other when the connection is unstable, resulting in no sound from the earphones.

4.Check whether the volume of the phone is on, it may be because the volume of the phone is turned off when you are not paying attention, at this time you can press and hold the volume button to turn up the volume. 5.

Replace again.

Summary. Strictly speaking, the iPhone 7's headphones 7P will also work, but other models will not. Because they use headphones with a lightning connector, in order to use them normally, two conditions must be met:

1. The interface of the mobile phone must be lightning

2. There must be an audio signal in the lightning interface.

So, although Apple's previous generations of models (such as S, etc.) have a lightning interface, but because this interface has no audio signal, it can't be used, not to mention Android, not even a lightning interface.

In short, there are only two models that can currently use Lightning headphones: iPhone 7 and iPhone 7 Plus. For more information about lightning (such as its advantages), please refer to this post by BBS.

What to do if iPhone 7 can't use headphones.

Hello. Apple 7 plugged in headphones and no sound.

Strictly speaking, the iPhone 7's headphones 7P will also work, but other models will not. Because they use headphones with lightning interface, in order to use them normally, two conditions must be met: 1. The interface of the mobile phone must be lightning2, and there must be an audio signal in the lightning interface, so although Apple's previous generations of models (such as S, etc.) have a lightning interface, but because this interface has no audio signal, it can't be used, not to mention Android, not even a lightning interface.

In short, there are only two models that can currently use Lightning headphones: iPhone 7 and iPhone 7 Plus. For more information about lightning (such as its advantages), please refer to this post by BBS.

1. The iphone7 mobile phone does not respond when plugged in the earphone, which is caused by the following reasons and solutions: it may not be the original earphone, the line between the earphone and the mobile phone hole is not compatible, resulting in no response when plugged in, and it cannot be used normally; Since iPhone 7 requires an adapter to use the earphone product, it is very likely that there will be compatibility issues between the earphones and the adapter; 2. It is also possible that the earphone itself is malfunctioning, you can try to use it with a different earphone; 3. After plugging in the headphones, open the control center, check whether the volume is turned off, and turn it on;

Do you still have any questions? <>

Summary. This may be because of an issue with the system settings after the upgrade, you can try the following workarounds:1

Check whether the headphone jack is connected properly. If it's wireless headphones, check if Bluetooth is turned on. 2.

In Settings - General - Restore - Restore All Settings select Reset All Settings. 3.In Settings - Bluetooth, find your headphones and try to unpair them, then pair them again.

4.In Settings - Sound & Haptics, confirm that the sound output is correctly selected as Headphone mode. 5.

Try turning your phone off and back on. If none of the above methods work, it is recommended that you contact Apple customer service or go to an Apple authorized repair center for repair procedures.

This may be because of a problem with the system settings after the upgrade, you can try the following solutions:1Check that the headphone jack is being connected.

If it's wireless headphones, check if Bluetooth is turned on. 2.In Settings - General - Restore - Restore All Settings select Reset All Settings.

3.In Settings - Bluetooth, find your headphones and try to unpair them, then re-pair them after a snap. 4.

In Settings - Sound & Haptics, confirm that the sound output is correctly selected as Headphone mode. 5.Try turning your phone off and back on.

If none of the above methods work, it is recommended that you contact Apple customer service or go to an Apple authorized repair center for repair procedures.

It's not an Apple phone, it's a tablet with an adapter plugged in to the headphones, or the sound is played.

If the tablet adapter is plugged in and the earphones still don't work properly after the system is upgraded, please try the following methods:1Check that the adapter is securely connected to the earbuds and try to plug it in and unplug it again.

2.To confirm that the headset is working properly, you can try connecting it to another device for testing. 3.

Select "Sound" in the settings to confirm that the headphone mode is correctly selected, not the speaker mode. 4.Upgrade to the latest operating system version.

If you are already running on the latest version, try a factory reset and reinstall the system. If the above methods do not solve the problem, please contact the technical support department of the tablet manufacturer or go to an authorized repair point for inspection and repair.

Summary. Hello, the problem that the headphones cannot be used after the iPhone system upgrade may be caused by a variety of reasons. Here are some possible workarounds:

1.Check that the headphone plug is plugged in tightly: Sometimes, if the headphone plug is not plugged in tightly, the headphones will not be used.

Please check that the headphone plug is plugged into the headphone jack of your phone. 2.Check the headphones for damage:

If the earphones themselves are damaged, it will also cause the earphones to be unusable. Please try using a different headset or plugging your headset into a different device for testing. 3.

Check the headphone jack for dust: If there is dust or dirt in the headphone jack, it can also cause the headphones to be unusable. Please use a cotton swab or blow up a balloon to clean the headphone jack.

4.Restart your phone: Sometimes, restarting your phone can also fix the problem that the headphones won't work.

5.Check your system settings: Make sure the headset option is turned on in your phone's system settings.

If none of the above methods solve the problem, we recommend that you contact Apple customer service or go to an Apple authorized repair center for repair. I hope mine can help you.

Hello, the problem that the headphones cannot be used after the iPhone system upgrade may be caused by a variety of reasons. Here are some possible workarounds:1

Check that the headphone plug is plugged in tightly: Sometimes, if the headphone plug is not plugged in tightly, the headphones will not be used. Please check that the headphone plug is plugged into the headphone jack of your phone.

2.Check if the earphones are damaged: If the earphones themselves are damaged, it will also cause the earphones to be unusable.

Please try using a different headset or plugging your headset into a different device for testing. 3.Check the headphone jack for dust:

If there is dust or dirt in the headphone jack, it will also cause the headphones to be unusable. Please use a cotton swab or blow up a balloon to clean the headphone jack. 4.

Restart your phone: Sometimes, restarting your phone can also fix the problem that the headphones won't work. 5.

Check your system settings: Make sure the headset option is turned on in your phone's system settings. If none of the above methods solve the problem, we recommend that you contact Apple customer service or go to an Apple authorized repair center for repair.

I hope mine can help you.

I got a new adapter, and the headphones didn't work either.

Hello, your device may have the following problems, Headphone Problems: If your headphones have been damaged or aged, it may cause them to not work properly. It is recommended that you try a different headset or send it in for service.

Device issues: If your device is malfunctioning, it may cause the headphones to not work properly. It is recommended that you send your device in for repair or contact customer service for assistance.

There are many reasons why you may not be able to use your headphones, but here are some of the most common ones and how to fix them:1Software Issues:

After the iOS update, some software functions may not work, and the Conduction Simple Earbuds cannot be used. In this case, it is recommended to uninstall the software and then reinstall it. 2.

Headphone jack problem: If you are using a mobile phone with a headphone jack, then the headphone jack may have problems, such as incomplete cleaning of the jack, damage to the jack, etc., at this time, you can use the headphone plug to clean the jack dirt, or replace the headphone jack. 3.

Loose Cable: If the cable is loose and the earphone is unusable, check to see if the cable is damaged or loose, or if you are using a different earphone. If the problem persists, it is recommended to replace the cable.

4.System setting issues: When there is no sound from the headphones, you can check the volume settings of the system to see if the volume has been turned off or turned down.

Some headphones also have their own switches or volume control buttons, which need to be used according to the instructions. In conclusion, when solving a headphone problem, you must first identify the cause of the problem and then take targeted solutions as much as possible. If none of these methods solve the problem, it is recommended to contact Apple's customer service staff or go directly to the repair point to deal with it.

If the headphones don't work after updating your iPhone's system, you can try the following methods:1Reconnect:

Make sure your headphones are properly connected to your phone, plug them into the headphone jack again, and make sure the plug is plugged in tightly. 2.Check the headphones:

Check the headphones for signs of damage or damage, such as damaged wiring or connectors. 3.Check the cleanliness of the headphones and connectors:

If there is dirt or dust on the headphones or connectors, you can use a cotton ball that is clean and free of moisture to gently remove it. 4.Check your audio settings:

Check your phone's audio settings to make sure they haven't been turned off or off. 5.Restart your device:

Try restarting your Apple device and try to connect your headphones again. If none of the above methods resolve the issue, we recommend that you contact Apple customer support for further help and solutions.