What are the reasons that will cause the home button of iPhone11 phone to fail?

Updated on number 2024-06-05
18 answers
  1. Anonymous users2024-02-11

    There are many reasons for the complete failure of the home button, the first of which is that the mobile phone has been used for a long time, and the hardware inside the button is aging, resulting in unusable or stuck in dust. Software conflicts can also cause the home button to malfunction, the most common being the deb plug-in after jailbreaking that causes the key to malfunction. This can also be caused by an abnormal phone system, which is relatively rare and can generally be restored to normal by updating the system.

    2.If the home button fails, it may be stuck in the dirt, flick the home button. After a while, white dirt may appear, continue to bounce until the dirt is reduced and it can return to normal.

    3.If you have problems with the software, you can open any app and press and hold the power switch for a few seconds until the screen appears to slide and shut down. Let go of the power button but don't slide it to power off, press the home button for a few seconds until the screen returns to the desktop.

    Now that you've readjusted the home button, it should work fine.

  2. Anonymous users2024-02-10

    iPhone11There is no home button on the mobile phone, and the full-screen mobile phone does not have this button, if you can't return to the desktop, it may be that the touch of the mobile phone screen is out of order.

  3. Anonymous users2024-02-09

    If the home button button of iPhone 11 fails, see if there is a problem with your phone? Or that there is a problem with your software, which causes it, and then take a look, are you having a problem with the mobile phone system? Or it's okay to say that there is a Qi Tian problem, and there should be no big problem in other words.

    Then, if you look at the other words, see if there is a problem with the phone? Or the button is out of order, it is recommended that there be a store to inspect and repair it, and there should be no big problem with other lines.

  4. Anonymous users2024-02-08

    The failure of the home button of the Apple mobile phone is most likely caused by the line problem caused by pressing the home button often or by the water ingress of the mobile phone, which can be inspected and repaired after the sale.

  5. Anonymous users2024-02-07

    Apple's mobile phone can only fail by pressing the home button for a long time, and the Apple 11 does not have a home button.

  6. Anonymous users2024-02-06

    Generally, the main cable is broken, and the second possibility is that the motherboard is broken, both of which will cause the keys to fail.

  7. Anonymous users2024-02-05

    There are several reasons why the Home button of your iPhone is out of order.

    1. The quality of the home button.

    2. The home button is physically damaged or the cable is damaged due to the drop of the mobile phone.

    3. The circuit is burned out due to water ingress into the mobile phone.

  8. Anonymous users2024-02-04

    Reasons why the home button of the iphone phone is out of order:

    1. Excessive use time.

    The Home button is one of the most used buttons on iPhone, and of course, it is also the most problematic place. If you use it for too long, it is very likely that the home button will fail.

    2. The home button shrapnel is deformed.

    Tests have proved that when most of the iPhones with the home button out of order were disassembled, they found that there was no support under the metal sheet, and there was some deformation, and the shrapnel on the screen was also slightly deformed. Poor contact between the cable and the screen will naturally fail.

    3. Go to the nearest after-sales center to replace one.

  9. Anonymous users2024-02-03

    1. Failure analysis:

    1. The home button fails due to software conflict.

    2. The system runs for a long time, resulting in the failure of the home response.

    2. Solution:

    2. Connect the iPhone with an external power supply, press and hold the Home button until the voice interface appears, and then remove the external power supply.

    4. If it is not due to the system or the hardware problem cannot be repaired, consider replacing the home button, purchase a replacement by yourself or solve it through after-sales.

  10. Anonymous users2024-02-02

    This is caused by an error in the phone application or a hardware issue.

    1. Turn off the phone and restart it to see if you can use the home button.

    2. Set the assistive touch function to temporarily replace the home button, the specific method is as follows:

    2. Then select the "General" option in the settings interface.

    3. Then open "Accessibility" in the general interface.

    4. Click on the "AssistiveTouch" option after entering.

    Notes:1. When using the iphone7 phone, you should regularly back up the iphone7 phone files to prevent the files from being lost.

    2. In the process of using the iphone7 phone, the iphone7 phone should be cleaned regularly.

    3. In the process of using the iphone7 mobile phone, the iphone7 mobile phone must be operated in a standardized manner.

    4. In the case of not knowing the problem, be sure to contact professional personnel for processing as soon as possible.

  11. Anonymous users2024-02-01

    Solution 1:

    Restart your device. If you can't restart your device, try force a restart.

    Solution 2:

    Restart the device by removing any protective film and case that may impede the use of the button or switch in question.

    Solution 3:

    Inspect the area around the button or switch for debris or dirt, then clean it with a soft cloth.

    Solution 4:

  12. Anonymous users2024-01-31

    Open the Settings app and tap "General". Go to the "AssistiveTouch" option and turn on the "AssistiveTouch" switch. Click on the "small dot" to replace the home button.

  13. Anonymous users2024-01-30

    1: Simple home button problem, such as unsatisfactory rebound effect: directly replace the home button gasket, does not involve the touch id part.

    2: The home button module is damaged, such as no response when pressed, broken cables, etc.: you can only find Apple for repair.

    3: The home button is used normally, the touch ID does not respond, and the fingerprint function is lost: you can only find Apple for repair.

    4: It is recommended to go to the regular after-sales center for maintenance.

  14. Anonymous users2024-01-29

    You can reboot the phone first, see if it is a software conflict and other problems, if it is not to see that you are home is broken, you can open the mobile phone settings app in the short term, click "General". Go to the "AssistiveTouch" option and turn on the "AssistiveTouch" switch. Click on the "small dot" to replace the home button, if you are not used to it for a long time, you should take it to repair as soon as possible, take it to the official maintenance point for maintenance, or make an appointment for mobile phone door-to-door maintenance for maintenance, I have made an appointment for lightning repair before, and the door-to-door maintenance has been replaced, my 7P is also in a similar situation, and the maintenance will be done in 10 minutes after the appointment, **It is a little cheaper than the official one, and it has been used for more than a year, and there is still no problem.

  15. Anonymous users2024-01-28

    For more information, please refer to the following steps.

    First: Flick the home button.

    Gently flick your finger on the home, and after a while, white dirt may appear, and then repeat the "flick" until it is normal.

    The second type: software debugging method.

    First, open any app and press and hold the power switch for a few seconds until the screen appears as a slide key. At this point, you can let go of the power button, but don't slide it to power off, and press the home button for a few seconds at the same time until the screen returns to the springboard. This has readjusted the home button and should work fine.

    However, if you still can't use the home button after trying, it may be a hardware problem and you need to find an Apple after-sales repair center to solve it.

    The third method: flash upgrade method.

    It cannot be ruled out that the home button may conflict with other programs and cause failure, so at this time, you can try to upgrade, restore firmware and other common flashing methods to try. If it still doesn't work, it's a hardware problem. You need to find an Apple after-sales repair center to solve it.

  16. Anonymous users2024-01-27

    Open the Settings app and tap "General". Go to the "AssistiveTouch" option and turn on the "AssistiveTouch" switch. Click on the "small dot" to replace the home button.

  17. Anonymous users2024-01-26

    Have you ever fallen? Have you ever dismantled the machine?

  18. Anonymous users2024-01-25

    What should I do if the home button of my iPhone fails.

Related questions
15 answers2024-06-05

When you are charging the iPhone 11, if you find that the iPhone 11 is heating up severely, please try to remove the case to help the phone heat dissipation, the phone case will cause the heat in the phone body to be difficult to discharge. >>>More

7 answers2024-06-05

Blue Whale TMT Channel on October 26, TechWeb reported that in response to the sharp decrease in iPhone 12 battery life after turning on 5G, Apple's iPhone Vice President of Marketing Kaiann Drance responded that iPhone12's increased intelligent data mode can balance data and power, in addition, Apple is improving battery life through software systems and cooperation with operators. >>>More

16 answers2024-06-05

The reason why the iPhone 11 consumes a lot of power:

1. The mobile phone system costs electricity. >>>More

7 answers2024-06-05

1.If the phone case is too thick, it will affect the induction between the charging coil and the wireless charger in the mobile phone, resulting in the inability to charge normally. >>>More

16 answers2024-06-05

How to solve the serious heating of iPhone11] The first batch of iPhone11 has been officially shipped, and many users who have got the new phone have reported that iPhone11 has a serious heating, especially shortly after the phone is turned on for the first time. After some exploration, IT Encyclopedia has a preliminary understanding of the situation and will tell you how to solve the serious heating of iPhone11. >>>More