What is the reason why the home suddenly starts tripping frequently?

The reason for the sudden frequent tripping in the home, the total power of the household appliances has increased, resulting in the current exceeding the rated current of the empty switch, so it trips frequently. Or a loose cable contact in one place can also lead to frequent tripping.

Hope it helps.

The main causes of tripping are:

1. Short circuit or overload;

2. Leakage. Frequent tripping in the home suddenly starts and should be checked:

1. Are there any new high-power electrical equipment added recently? - It can cause overload tripping.

2. Is the electrical equipment or electrical circuit seriously aged? - It will cause leakage tripping.

There will be many reasons why the home suddenly starts to trip frequently, and you need to find an electrician to investigate, and the general reason for tripping is because the operation of the meter load is exceeded, or the connection will trip frequently.

Suddenly start to trip frequently at home, first check what electrical appliances will trip, check whether the main empty terminal is loose or empty, whether there is damage and empty opening, whether the zero live wire is grounded?

1.The leakage protector is damaged.

2.Line leakage short circuit.

3.The neutral wire is broken and grounded.

4.Overload. 5.The pressure of the power grid is unstable.

The power is not strong enough and will cause our tripping to a mundane beat, especially in the case of rainy days.

Call a professional electrician to check the wiring and be careful.

Hello dear! The solution to the sudden frequent tripping at home is as follows: 1. Check the situation of household appliances at home, whether the number of electrical appliances at home has increased, and whether some high-power electrical appliances are often used.

For example, whether air conditioners, kettles, etc., are used at the same time during certain time periods. If that's the case, it's an overload. Either don't use high-power appliances at the same time, or replace the switch and choose a switch with a larger current cap.

2. Detect whether there is a short circuit in the line at home, if a short circuit occurs, it is best to ask a professional to solve it. If the short circuit is solved, the switch will not trip. 3. Detect whether the line has aging leakage, poor contact, etc.

If there is such a situation, the switch will also trip. If that's the case, replace the wires with new ones. This can also solve the problem of jumping room.

4. Check whether the voltage at home is stable, if it is unstable, it will also cause tripping. If it is unstable, you can communicate with the power supply department. Install voltage stabilizer and other solutions.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Generally, it is now equipped with or has the function of leakage protection, and the old tripping is generally due to two reasons, 1. Because the heavy load exceeds the rated load, it is an overload protection trip, 2. Because some electrical appliances have grounding phenomenon, they trip due to leakage protection. You can gradually plug in or turn on the electrical appliances, and when you turn on an electrical appliance and trip, you must first check whether there is a suspicion of leakage in this one, or a high-power electrical appliance that has accumulated to exceed the rated load. Check whether there is leakage can turn off or unplug other electrical appliances, turn on this one separately, if it is turned on normally, it means that it does not leak, if it will also trip, it means that the problem is on this equipment.

If there is no leakage equipment, it is a load problem, you can first see how big your air opening is (also pay attention to the allowable load of the meter), and then convert the total power of the electrical appliances you turn on in use, (refrigerator and air conditioner to compressor start whether the power is calculated), if it is indeed overload, it is impossible to adjust and avoid the problem of meter expansion and air replacement should be considered. If it is not the above problem, then change to a new empty open with the same capacity to see if it is caused by empty opening failure or allergies.

1. If you usually do not jump and trip or are easy to trip when using an electrical appliance, it means that the electrical appliance has a leakage or a place with poor insulation; 2. If a certain line is used as long as it is used, that is, a certain line jumps once it is supplied with power, it means that there is a leakage of this line; 3. If an electrical appliance does not jump at the beginning when it is used, but jumps after a while, it means that the insulation of the electrical appliance is aging, and the thermal stability deteriorates and leakage occurs; 4. If it is when using electrical appliances with relatively large power consumption or more electrical equipment in use at home, it trips at this time, it means that the rated current of the tripped air switch (PVC air switch or leakage protector for household) in your home is small, and you should replace it with a suitable leakage protector with a relatively large rated current.

There are two possible causes of tripping;

First, the electricity load during the peak period of household electricity consumption is too high, and the capacity reported to the power supply enterprise is insufficient, so the power supply enterprise handles the "capacity increase".

Second, if the reported capacity is sufficient, it may be that the rated current of the air switch at home is too small to meet the household electricity load, or there is leakage in the line that causes the leakage switch to trip.

Circuit Trip Resolution:

1. After the leakage protector trips, a button will pop up, and it can be closed again by pressing it.

2. It is indeed a place where there is leakage, so check it. At the same time, many leakage protectors also have air switches, you look at the power and short circuits.

3. The leakage protector is broken. All the sockets in the house are divided into two leakage protectors, but one of them is often tripped, and then all the lines of this one are connected to the other switch, and they never skip again.

1. Line short circuit and leakage: This phenomenon is relatively easy to judge, because as long as the machine is turned on, it will trip immediately. If you find that the line is short circuit or leakage, you should ask an electrician to deal with it. After checking for faulty shunt problems, power is sent after the fault is successfully repaired.

2. Leakage of electrical equipment: You can use a voltage tester to check whether the metal shell of the equipment is leaking and find out the fault.

3. Excessive line load: For large household appliances, such as air conditioners and washing machines, they must be routed separately, otherwise it will be easy to trip during use.

The house tripped again, and it was too troublesome to ask an electrician every time, so teach you a trick to easily judge the fault.

What should I do if my home suddenly starts to trip frequently Hello Song, dear, I'm happy to answer for you, according to your question, the answer to the Lord here for you to find is: 1Check the condition of household appliances, such as air conditioners, hot water kettles, etc., which are used at the same time during certain time periods, resulting in frequent tripping, which is caused by current overload.

At this time, you can choose not to use high-power electrical appliances at the same time, or you can replace the group search switch and choose a switch with a larger current limit. 2.Detect whether there is a short circuit in the wiring in your home, and if a short circuit occurs, it is best to ask a professional to solve it, so that the switch will not trip frequently.

3.Detect whether there is aging leakage in the line, leakage of the connection, poor contact and other conditions. If this is the case, the switch will also trip frequently.

At this time, replacing the wire with a new one can solve the problem of frequent tripping. 4.Detect whether the voltage at home is stable, and unstable voltage can also cause the problem of frequent tripping.

It can be communicated with the power supply department and solved by installing a voltage stabilizer.

Summary. There are many reasons for sudden tripping at home, first of all, it may be caused by the aging of the circuit, and then it may be caused by leakage and short circuit.

There are many reasons for the sudden tripping of the home, first of all, it may be caused by the aging of the electric deficit Zheng Zhuo Road, and secondly, it may be caused by leakage and short circuit.

Do you have any other questions?

In the case of no load, it will also trip every ten minutes.

It may be the cause of leakage.

It is recommended that you contact a professional circuit maintenance personnel to come to the door.

If there is a leakage, shouldn't you jump all the time?

This is also a certain possibility.

The aging of the line also has a certain effect.

When the lead wire is loose, it will cause oxidation or even heat generation of the wire, resulting in frequent tripping of the circuit.

It's all an internal line, there are pipes laid, and they jump every ten minutes, will it be a problem with the main switch?

It could also be a problem with the total circuit.

Well, thanks, that doesn't work out either.

It is very difficult to find out what the specific situation is, and the problem in that place can be solved by contacting circuit maintenance professionals.

Ok thanks.

You can see if your neighbors are in the same situation.

If so, you can contact the property to solve the problem.

Do you have any other questions?

Electric switch refers to a relatively large power switch, leakage protection switch, also known as a switch. It is a kind of switch branch marker that is mainly used for "isolating power supply, reverse operation, connecting and cutting off small current circuits", and has no arc extinguishing function. If tripping starts to occur in your home, be sure to check what is wrong with the circuit as soon as possible.

The reason why the home suddenly starts tripping frequently

It may be caused by the peak power consumption period, because during this period, the circuit is prone to overload, for which the user can contact the power supply department to report the lack of circuit capacity to them, so that they can purchase additional capacity. However, it may also be caused by the rated current of the air switch at home is too small, and the air switch with high current needs to be replaced.

Bang Yiyuan is the sound of tripping at home, what should I do if there is no power when I push it up

1. It may be a short circuit or a leakage. Both of these reasons can be tripped.

2. Violent lightning (nearby power supply system, voltage fluctuation violently) can also trip.

3, can't push up:

1) Check whether the electrical appliances are faulty first.

2) Whether the temperature of each terminal board rises sharply (there is a mushy smell).

3) If you can't check it, you can unplug all the plugs at home, plug them one by one to check, and when the plug that trips is inserted, it will trip and repair it.

4. After troubleshooting, press the small square on the right side of the switch and then close the switch. (Note that you can press the small square to close, this button is also called the work protection button, to avoid live work).

Precautions: If there is a certain risk of repairing the electric brake by yourself, it is recommended to find a professional electrician to test and repair.

The reason why the home suddenly began to trip frequently snapped and the home tripped, and how to deal with the power when pushed up, now everyone knows. When the circuit is installed, it should be cracked and pasted with insulating fireproof tape, and different air switches should be connected independently and the connection should be orderly. For more knowledge about circuit switches, you can continue to pay attention to it here.

1. Household appliances are overloaded

The air switch connects all circuits in the room, and if the power of the household appliance is too large and the current is overloaded, the air switch is bound to trip in order to play a protective role.

2. The model and specification of air opening and bending are not suitable.

The home is equipped with ** air conditioner, high power, high current when starting, and the air switch should choose D series industrial-grade switch, with large load, no need to worry about tripping. If the C series switch is selected, the bearing capacity is low, and it is easy to trip when used in the future.

3. The indoor environment is too humid.

The electrician does not insulate the wire joints in place, or the wire insulation layer is aging and failing, and in a humid environment, the risk of short circuit conditions is high, which will also lead to the tripping of the air switch.

Therefore, when wiring the circuit, it is necessary to carry out the pipe piercing treatment; In addition, the joints should be misplaced and bandaged, and they should not be wrapped together, which can greatly reduce the risk of accidents.

4. There is a problem with the circuit connection.

This situation is more common in old houses or houses that are being renovated. Because the wires are aging, or the wires are connected incorrectly, the neutral live wires are connected together, resulting in the circuit not flowing, and the wide lifting is boring and tripping.