Does the LD 002R print accuracy of Creality 3D printer high?

The LG-002R of Creality 3D printer has very high printing accuracy. And the quality of this printer is very reliable, the performance is also very good, for the average family to buy this printer can be used for more than three years.

The printing accuracy is up to millimeters, they are self-developed slicing software, extremely fast slicing, as well as edge softening, anti-aliasing design, unique light gathering design, performance, longevity, light uniformity will be significantly improved.

This kind of 3D printer has a relatively high printing accuracy in it, because its overall printing is fast and the printing is relatively slow, so its printing accuracy will be a little higher.

Our company is doing jewelry design, using this 3D printer, LD-002R uses 2K solid-state screen display system, the accuracy of the printed product is very high, the finished surface is smooth and delicate, the accuracy is comparable to millions of industrial-grade effects, if you pursue printing accuracy, you can consider this machine.

Landlord,I used to use the light-curing LD-003 of Chuangxiang 3D.,Now they have launched a new LD-002R,There are several upgrade points,It is said that this main cost-effective and high configuration,It should not be bad。

The printing accuracy of the LED-0022 of Creality 3D printer is very high, accurate to the meter.

Skyworth 3D printer has very high printing accuracy and good quality.

The accuracy of this 3D printer you mentioned is very high, but it depends on the material you use.

I think the accuracy of this kind of printing of Creality 3D printer is still very high, and it is very cost-effective.

Does the LD 0002R print accuracy of the 3D printer high? Have you used it, do you know whether the printing accuracy is high?

If the progress of the 3D printer is high, I feel okay, right?

Creality 3D is a pioneer in the R&D and mass production of domestic hot melt deposition (FDM) and light curing (DLP) 3D printers. The products I design now are printed out with LD-002R to verify the feasibility of the product, which saves me a lot of time to talk about potatoes. After using it for more than half a year, the machine has been running stably and I can't find any faults.

Skyworth Chuangxiang three-dimensional three-person machine is still better.

In this kind of stall filial piety printing machine is still better, because he arrives at this printer with a relatively high degree of fine roughness, so the things that have been printed will be a little faster, so its performance is still a little better.

I think the three-place printer of Kangshang Media is very easy to use, and this should be able to do some printing things.

The third brother of Kangweishan Chuangxiang 3D, is that printer good? I felt like I could give it a try.

As far as I know, the models printed by this machine are very high, and there is no problem with printing dental molds, there is no noise during printing, and there is no smell, a very practical machine, it is recommended that you can arrange to be included in the purchase list.

Due to the high precision and ultra-fast printing speed of light-curing 3D printers, they often become the first choice for Seiko manufacturing and super makers, but it is undeniable that the products are often high, which brings a threshold for small and medium-sized enterprises and individual users.

After 7 months of technical research, the Creality 3D R&D team has reduced the ** of a light-curing 3D printer to less than 2,000 yuan, which is completely the same as that of FDM 3D printers.

Compared with FDM 3D printers, light-curing 3D printers are also more widely used in the industry, at present: LD-002R has been used in the field of education, prototype making, auto parts, toys, dentistry, home and other industries.

LD-002R can achieve accurate printing, which can fully meet the requirements of the general industry for model refinement. And it also supports 4-8x edge anti-aliasing function, and the printed model can be used directly without even grinding at all. For models with high precision requirements in the manufacturing industry, our original practice is often to send out to institutions that specialize in printing models, which is not only costly, but also quite troublesome if it needs to be modified many times in the middle.

It is very convenient to print with LD-002R, print instantly, modify at any time, and greatly save time in the platemaking stage.

LD-002R user-printed model display.

Users who are familiar with the light-curing 3D printing method know that FDM is a printing method that is formed by dots and formed by faces, while LCD light-curing printing is formed by faces. This greatly improves the speed of 3D printing models, and the LD-002R 3D printer can generally reach 6-18s layers.

For users who use light-curing 3D printers for the first time, we have also listed some common questions for you, hoping to help you.

This reputation is still a good product, and the cost performance and product are a very superior qualified product.

Light-curing 3D printer, this model is to connect the net to be able to answer accurately.

I think this printer is okay, and it's pretty good to enter, this.

What should I say in three sentences? This machine prints it with exceptionally good quality, and it is recommended that you use um, the quality is particularly good in all aspects.

The landlord can directly start the 3D printer of Chuangxiang 3D, after all, it is a world-renowned brand, and the quality is very reliable! LD-002R This machine is simply invincible, the overall performance is also very good, I usually print animation models with this machine frequency is very high, not an old driver or a novice can be used, I hope to help you.

Recommend the LD-002H of Chuangxiang 3D to the landlord, simple operation, high printing accuracy, advanced functions and other advantages, the online evaluation is very high, the reputation is not bad, you can buy this if you need it, hope.

The molding size of Creality 3D LD-002H 3D printer is 130 Balance * 82 * 160mm, and the LD-002R is 119 * 65 * 160mm size. The LD-002 uses a higher resolution of 1620*2560 and higher accuracy, and the LD-002R uses a solid-state display system of 1440*2560 pixels. In addition, there are quite a few places for LD-002H to upgrade and optimize.

You regret it, your problem, I seem to have encountered it before, the following is my original solution ideas and methods, I hope to help you, if there is a mistake in the yard, I hope to forgive me! Our company is doing jewelry design, using this 3D printer, LD-002R uses 2K solid-state screen display system, the finished product accuracy is very high before printing, the finished surface is smooth and delicate, the accuracy is comparable to millions of industrial-grade effects, if you pursue printing accuracy, you can consider this machine. Thank you very much for your patience** and have a great day if it helps! Thank you!

Landlord, the desktop 3D printers on the market generally have a high printing accuracy, such as the CR-10 3D printer of Creality 3D, the accuracy can be reached.

Yes, the accuracy of Creality 3D can be very high, for example, 20 microns for an industrial grade and CR10. The actual CR10 printing accuracy is that it is impossible to print a complete model at all, only a novice like me was fooled into buying their 3D printer!

I bought the CR-2020 model 3D printer, which is very quiet during use, and the accuracy and stability are okay.

Creality 3D CR-5PRO is a quasi-industrial-grade high-precision 3D printer, compared with the 3D printers designed by Creality in the past, CR-5PRO should be regarded as the most distinctive shape design, all-metal ivory white body, beautiful atmosphere, left, middle and right glass is clear and transparent, and the whole process can be observed during 3D printing. The CR-5PRO comes standard with acrylic sheets, which can be upgraded to a fully enclosed body by the user.

Advantages of Chuang3D.

1. Safe to use.

Considering that nozzles and print platforms can reach some fairly high temperatures, enclosed 3D printers provide stable home or workplace security. This is especially important in home and school education scenarios where children or pets are present, so that children cannot touch high-temperature parts such as nozzles and printing platforms.

2. A wide range of printable materials.

After the CR-5PRO has a top cover, it forms an enclosed space, which can prevent unnecessary airflow from changing the printing environment, which can not only prevent the 3D printing object from warping, but also make the printing environment warmer than the open structure. The housing can help maintain a stable, suitable output environment, making it ideal for printing special 3D printing materials such as ABS.

3. Better printing quality.

In addition to the points mentioned above, a closed 3D printer has a stronger frame than a printer with an open structure, which also improves the quality of 3D printing. Especially for ABS and larger 3D printed parts, the print quality may vary depending on the enclosure quality of the case.

The second type: special type.

Heygears' industrial 3D printers for oral dentistry can be said to be the "trump card", including ordinary cabinet dental 3D printers and small and exquisite desktop 3D printers.

Cabinet 3D printers are common, but do you know more about desktop 3D printers? HeyGears' latest desktop 3D printer, Ultracraft DS, is a desktop dental 3D printer that can be used in denture laboratories to achieve efficient digital dental production.

Because DS is compact and does not occupy the "body size" of children, it can be directly applied to dental clinics. It is equipped with the advantages of intelligent networking HeyGears Ultra-Hub (cloud data management center) and Ultra-Net (printer equipment management system), and the intelligent operation page is easy to use. According to the patient's condition, doctors can use the corresponding 3D printing materials for different dental products to produce the required medical products.

Then you have a good double circumference on the upper circumference of the printer is very high, who can be cheaper, and there is no such product for service.

Industrial-grade 3D printer, I think this is very good, and Skyworth 3D C2-5 is also very accurate in India, he should be able to do some better printing.

The payment of industrial-grade 3D printers has the opposite direction, and the three-dimensional ones are better.

The quality of Creality 3D is very good, our company just recently bought this one, and now we use this machine to print models every day. I'm glad mine was able to help you.

His industrial-grade printer must be the first one to be better, because he is a little slower in directing, so its printing progress will be a little higher.