How do I choose to enable auto run projects in Windows? without other software .

Updated on technology 2024-06-14
26 answers
  1. Anonymous users2024-02-11

    Start - Programs - Launch, right-click on "Startup", select "Open", and put the shortcut of the software you want to run automatically into the "Startup" folder.

  2. Anonymous users2024-02-10

    C: Documents and Settings Your username Start Menu Program Launch.

    Add a shortcut inside and you're good to go.

    At Start-Run -msconfig

  3. Anonymous users2024-02-09

    Hehe, my choice is to leave only the input method and antivirus software.

    That's it.,ctfmon,It's an input method.,Anti-virus software.,It's up to you.,I don't know what antivirus software you are.。

    Honestly, none of the other startup projects are necessary, they can be started manually on their own, so don't be careful.

    Besides, if you learn this, it is better to learn the service project, the start-up project can not be learned at all, different procedures have different start-up projects, and the basic service project is indeed fixed.

  4. Anonymous users2024-02-08

    There's no way to specify which ones they are.

    If you can, you can post all of your options, and then I'll pick out the most streamlined startup items for you.

  5. Anonymous users2024-02-07

    In fact, it's okay to ban everything. You can use 360 Security Guard, see their addresses, like anti-virus software, and the startup items of the input method are open, and the others are deleted. Because there is no need to start a lot as soon as you turn on the machine, otherwise it will get stuck.

  6. Anonymous users2024-02-06

    What's so hard about that? Click Start, type cmd in the search, then right-click on the found cmd, click Run as administrator, then enter the following command in cmd and press enter: bcdedit

    Then paste the graph of the command result and I'll teach you how to do it.

  7. Anonymous users2024-02-05

    You first click on my computer's right-click properties Advanced Boot & Recovery Settings System Boot [boot loader].

    timeout=3

    default=multi(0)disk(0)rdisk(0)partition(1)\windows

    operating systems]

    multi(0)disk(0)rdisk(0)partition(1)\windows="microsoft windows xp professional" /noexecute=optin /fastdetect

    Copy this in and the file will be saved! Then OK, and then restart.

  8. Anonymous users2024-02-04

    If you just want to shorten the choice wait time and let it start W7 by default, this is easy. After logging in to Win7. Control Panel - System - Advanced System Settings, Point Start and Fault Recovery"Settings", select the default operating system you want to select"windows 7"Remove the checkmark before "Show operating system list time".

    If it is to remove the list menu of the operating system with the repair file is useless. Removing the list option is cumbersome and is not recommended.

  9. Anonymous users2024-02-03

    This one looks like this! windows 7..In front of your C drive, you have a 100k boot line disk. I'm also deleting the 100k boot line under fdisk. To be able to pretend to be XP!

  10. Anonymous users2024-02-02

    Files can be modified! If you don't know about this! And easy!

    In fact, you can run msconfig to check all boot paths. This way, he will detect your unsuccessful XP path. Ask if you delete the wrong path and you delete it on it!

  11. Anonymous users2024-02-01

    Open the win7 you want to use, right-click on the computer (that is, my computer used to be called) - Properties - Advanced System Settings - Startup and Fault Recovery - System Startup That"Default operating system"Select the system you want to use, then tick the box and select 0 seconds when the list of operating systems is displayed, and you can go directly to the system you want to use when you turn it on.

    Win7 is more complicated to modify the startup file, I can only teach you to set it up like this.

  12. Anonymous users2024-01-31

    Win7 Extra Startup Item Removal Method:

    Right-click Start Attachments Command Prompt, right-click and select Run as administrator, which opens the command line program as administrator.

    In the "Command Prompt", type " and press enter, you can view the specific content of the two (or more) startup menus, and find the resumeobject line similar to the ** under the abandoned system.

    Then type bcdedit delete to delete the deprecated menu.

    There is a simpler way to do this: enter cmd in the run box, then enter bcdedit delete f, and press enter.

  13. Anonymous users2024-01-30

    Open the hidden file under the C drive,Open it with Notepad,There is a boot menu in it,You have to see which one is not used,Delete the whole list of commands。

    ps:You can't save it directly after modification.,Save it elsewhere first.,Then delete this.,Then cut the saved one over.,It's best to set the attribute to hide again.。

  14. Anonymous users2024-01-29

    The boot information of the system is stored in the first sector of the first partition,The previous boot can not be deleted means that you have a problem with formatting,It is recommended that you use a deep disk,There is a windows pe in it,After you start it, the partition tool,Repartition the hard disk should be fine。

  15. Anonymous users2024-01-28

    Copy out the information you want first, then format it in its entirety, and reinstall the system.

  16. Anonymous users2024-01-27

    Start running msconfig

    Or press win+r directly to open the run window and enter msconfig

    In the "System Configuration" window, click the "Boot" tab, select the win7 system in the big box above, click "Set as Default" at the bottom, and change the timeout in the lower right corner to 0, and finally confirm.

  17. Anonymous users2024-01-26

    Right-click on "Computer" -> Properties -> Advanced System Settings -> Startup and Failback -> Settings.

    If the default operating system is Windows 7, the time when the operating system list is displayed is changed to 0

    Reboot and boot the computer without the option to start the project.

  18. Anonymous users2024-01-25

    360 temporary system, this should be only available after installing a patch with 360.,It should be gone the next time you turn it on.。

  19. Anonymous users2024-01-24

    Have you recently made a new system?,It's a system disk.,You must be using the ghost version of the system disk with DOS toolbox.,If you don't want it to appear.,Just right-click on my computer-Properties-Advanced-Click on the settings there for startup and failback-select the default system above as XP,And then the display of the operating system list below is set to 0 seconds.,Click OK.。

  20. Anonymous users2024-01-23

    Install the DOS toolbox.

    Right-click on My Computer Properties, Advanced, Boot Recovery Settings – set the default operating system and set the wait time to 3 seconds or one second.

  21. Anonymous users2024-01-22

    DOS Toolbox! Used for backup and restoration.

    Select Windows

  22. Anonymous users2024-01-21

    Are you not installing the ghost version of the system?

    Ann that appears normal.

  23. Anonymous users2024-01-20

    Right-click on my computer - Properties - High Altitude Thick Level - Pick up the loss branch to start and fail back - Settings - System Boot Select the default system you need to start The time to display the operating system list is 0 seconds Click on the following: Set timeout=0 point Chun Min click OK OK。。。 The premise is that your operating system is Windows XP

  24. Anonymous users2024-01-19

    Right-click on My Computer ---Advanced --- Startup & Recovery settings on the right"

    Then, under the default operating system, select the Rough Pure Operation Rock Limb System that you want to start automatically. Confirm to exit. That's it.

  25. Anonymous users2024-01-18

    You can only do which operating system you want to boot first, or choose manually!

  26. Anonymous users2024-01-17

    Method: Left mouse click: Refers to the large custom selection file.

    Select all the current window files.

    Left-click (select the first one and the last one): Continuously selects files.

Related questions
8 answers2024-06-14

There are 2 options.

First, open iTunes - click on the file - click on the import file or folder - select the ** file you want to add. In this way, the imported ** files are in a large list, and when you connect to your iPod, iTunes will automatically sync into your iPod (provided you don't have the option to sync manually), and all the files that appear in the iPod location are in, ** - Songs. >>>More

10 answers2024-06-14

You can choose freely according to the actual situation. If the amount of each purchase is about the same, you can choose a bill installment, and if one of the purchases is very high, you can choose a single installment, and the installment interest rate will be slightly different depending on the installment method. If you encounter difficulties in repayment, you can also use the Huibei app, which can provide a maximum of 50,000 yuan, and you can postpone repayment for another month after the bill installment.

14 answers2024-06-14

No, at least the built-in themes are not supported.

You need to use a third-party tool. >>>More

27 answers2024-06-14

There are several main things to set the desktop and taskbar icon size: >>>More

3 answers2024-06-14

Represents the system is not the latest patch!