What is the gas inside the induction lamp and what does the induction lamp mean Short introduction

We use krypton gas for low frequencies.

A stable inert gas.

The induction lamp is a magnetic energy lamp without obvious electrodes, which has the characteristics of high light efficiency, shockproof, longevity, environmental protection, high color rendering index, fast start-up speed, and a service life of more than 60,000 hours. And it can adapt to harsh environments, and can start and work normally in an environment of minus 25 degrees Celsius. However, the power of induction lamps is difficult to increase, and the cost is high.

What is an induction lamp

The induction lamp is a kind of magnetic energy lamp without obvious electrodes, which is a high-tech product, which is made by the scientific and technological achievements in many fields such as electronics, optics and magnetic materials, which represents the future development direction of lighting technology.

Compared with traditional lamps, induction lamps have many advantages, first of all, the light efficiency of induction lamps is often higher than that of ordinary lamps at the same power. At the same time, the induction lamp also has the characteristics of shockproof, longevity and environmental protection, and can be used for more than 60,000 hours.

Moreover, the induction lamp can adapt to the harsh environment more than ordinary lamps, and the lower limit of its starting temperature is very low, even in the extreme environment of minus 25 degrees Celsius, it can start and work normally. In addition, the induction lamp has a high color rendering index and a fast start-up speed.

However, under the limitation of the volume of induction lamp bulbs, it is difficult to increase the power of induction lamps, and the power of induction lamps we see on the market is usually within 200W. Moreover, the cost of induction lamps is high, and the popularity is low at present.

Because the induction lamp is a new type of energy-saving lighting product, there will be many consumers who do not know what the "induction lamp" is, and some consumers know the induction lamp, but do not know what is the high-frequency induction lamp, what is the low-frequency induction lamp.

The working frequency of the high-frequency induction lamp is more than 2MHz, and its gun body is a conventional type with a built-in coupler.

The working frequency of LVD lamp is about 2kHz, and the bubble body is mainly ring-type, with an external coupler.

High frequency electronic discharge lamp is a high-tech new light source integrating the latest electronic power-saving technology and electric light source technology, which does not use filament, and uses a magnetic field to excite gas discharge and emit light, which has many advantages such as high efficiency and energy saving, green environmental protection, and long life. The high-frequency induction lamp is composed of three parts: the excitation power supply, the power coupler and the bulb, and the excitation source generates an electric frequency current of more than 2MHz, which is sent to the power coupler through the feeder. When a high-frequency current passes through the power coupler, a high-frequency electromagnetic field is generated.

The changing magnetic field produces an electric field perpendicular to the change of the magnetic field, so that the electrons in the discharge space inside the bulb are accelerated by the electric field, and when the energy reaches a certain value, it collides with the gas molecules in the container, and the gas avalanche ionization in the bulb forms plasma. When the plasma stimulone returns to its ground state, it spontaneously emits ultraviolet light, which excites the fluorescent powder on the wall of the bulb to emit visible light. Because it works in the state of high frequency and high pressure, it is more difficult to manufacture than LVD lamp, and the technical content is relatively high.

The cost of manufacturing is also greater than that of LVD lamps. Its advantages are: no flicker, can be matched with conventional lamps, the disadvantage is ** higher than LVD lamps.

LVD lamps (low-frequency induction lamps) work in medium and low frequency conditions, so they are relatively difficult to manufacture and have low manufacturing costs. The advantage is that it is lower than the high-frequency induction lamp, and it can produce high power (200W---1000W). The disadvantages are:

Slight flickering and requires special lamps.

Due to its high working frequency and no flicker, high-frequency induction lamps are more suitable for use in lighting equipment such as schools, households, industrial and mining, tunnels, and solar lamps. It can be said that most of the industrial, technological and transportation professional lighting fixtures.

LVD lamps can be used to create high power and are suitable for tall lighting areas.

According to the above content, in terms of quality and technology and the degree of popularization and promotion in the future, LVD lamps cannot be compared with high-frequency induction lamps. Although it seems that LVD lamps have a certain advantage in the market, the market is not dominated by the best products, but by the quality and technical content to measure the future market trend of a product.

Long life, high efficiency and energy saving.

Since there is no filament or electrode inside the bulb, the life of the light source depends only on the electronic circuit of the lamp and the manufacturing technology of the bulb, and the general life can reach 60,000 100,000 hours. Energy-efficient. Maintenance-free, long life, life 60,000 hours.

With the same luminous flux, the power consumption is only 1 6 of incandescent lamps, and the light efficiency reaches 65lm w. Induction lamps have no filaments and electrodes, and according to the "barrel principle", the life mainly depends on the life of electrolytic capacitors and the natural attenuation of phosphors, and the life span can reach more than 60,000 hours, which is 60 times that of incandescent lamps and 20 times that of halogen lamps. Compared with ordinary incandescent lamps, the energy saving is more than 80%.

High color rendering. Using fluorescent triprimary color powder, the electro-optical conversion efficiency is high, that is, the light efficiency is high, the color rendering index is greater than 80, the light is soft, the light chromaticity is close to the sunlight, low glare, and the natural color of the illuminated object is presented.

High power factor.

The circuit is specially optimized and the power factor is greater than 95. Among them, the power factor of high-frequency induction lamp can reach more than 99%, the harmonic is small, and the electrical performance is excellent.

The light source is flicker-free.

Due to the high operating frequency, it is considered to be "completely free of flicker effect", which does not cause eye fatigue and protects eye health.

Green and environmentally friendly. The raw material is made of solid mercury, which will not cause pollution to the environment even if it is broken, and has a rate of more than 99%, which is a real environmentally friendly green light source.

Low maintenance costs.

General incandescent lamps, fluorescent lamps, energy-saving lamps, and other gas discharge lamps all have filaments or electrodes, and the sputtering effect of the filament or electrodes is precisely the inevitable component that limits the service life of the lamp. The induction lamp has no electrodes, and it emits light by combining the principle of electromagnetic induction and the principle of fluorescence discharge, so it does not have a component that limits the life, so the theoretical life of the light source is as long as 610,000 hours, which can greatly reduce the maintenance cost of replacing the light source, especially suitable for important places where it is difficult to change the lamp or has high safety requirements.

Scope of application of this paragraph.

Based on the long life of induction lamps, remarkable energy-saving effects, high safety, green environmental protection and other special induction lamps before and after use.

Therefore, it is suitable for factory workshops, school classrooms, libraries, greenhouse vegetable and plant sheds, auditorium halls, conference rooms, ceilings of large shopping malls, very high factory buildings, sports fields, tunnels, complex traffic areas (street lights, sign lights, bridge lights), subway stations, train shops, dangerous areas or lighting sewer lights, urban lighting flood lighting, landscape greening lighting, etc., especially suitable for high-risk and important places where it is difficult to change lights and expensive maintenance.

Founded in 1995 in Xiamen City, Fujian Province, Xinyineng Electromechanical Technology (Xiamen) is a high-tech enterprise specializing in the utilization and development of solar energy, wind energy and hydropower, LED research and development and production. At present, our products mainly include solar photovoltaic, LED street lights, flood lights, tunnel lights, high bay lights, induction lamps and other series of application fields. Strong R&D strength, excellent material selection and strict quality control provide a full guarantee for the quality and reliability of products.

The significant advantages of LVD induction lamps are: long life, high luminous efficiency, high power factor, stable luminous flux output, high reliability, high color rendering, low harmonic content, low temperature fast start, wide color temperature range, instantaneous restart, no flicker and no glare, so it can bring the following benefits to users: high efficiency and energy saving, reduce lamp replacement costs, greatly reduce maintenance costs, etc.

LVD induction lamps fully comply with CCC, UL, CE, FCC, SON, KETI and other domestic and international standards, and various series and models of LVD induction lamps can fully meet the lighting requirements of commercial indoor or outdoor, industrial, social public institutions and public infrastructure. In the case that incandescent lamps are banned from all over the world, LVD induction lamps have become the best choice for high-efficiency and energy-saving light sources, and have become an ideal product for the operation of energy management contract EMC model.

Main technical features of Hongyuan induction lamp:

1.Electrodeless ultra-long life, 5-year warranty, maintenance-free for many years of use2High power factor", high efficiency and energy saving.

3.Excellent color rendering index, CRI >80(Ra)4High luminous efficiency of more than 80 lumens per watt.

5.Working frequency: 230kHz

6.Constant luminous flux, 2000 hours luminous flux maintenance rate" 95 7No flicker, no glare, soft light, fully protect your eyesight8E27 lamp head, easy to use.

9.The mercury solids content is much lower than that of fluorescent lamps, and does not exceed the international standard of 5mg10The harmonic content has reached the international L-level standard, which is more environmentally friendly11With a unique patented chip technology, it can be reliably lit up at temperatures as low as 25°C.

12.The ballast has automatic short-circuit protection.

13.American standard and European standard wide voltage system, constant power output, voltage fluctuation has no effect.

It's a fluorescent lamp without electrodes.

LED photoelectric parameters are still unstable, and the heat dissipation problem of the circuit board still needs to be solved!

In short, each light source has different degrees of drawbacks, and it is important to determine what kind of light source to use according to the actual situation when choosing!

The best thing isn't necessarily the right thing for you!

Lamps without filaments, LEDs are the most energy-efficient.