What are the requirements for the location of the socket installation during interior decoration?

The interior decoration must be stable during the installation of the socket. However, when installing the socket, do not place the socket in a place that is too high, nor can you place the socket in a place that is too low, especially in a place close to the water source, and do not install a socket, otherwise it is easy to leak the power supply. A number of unnecessary safety hazards have emerged.

Of course, it should also be noted that the indoor decorative socket must be designed, after all, once the design is completed, it may be more difficult to modify it later, so the installation socket must be installed in place.

1. Don't be too high.

The socket can not be installed too high, this is inevitable, because we usually use mobile phones, computers or TVs more, the socket line of these electronic devices is not so long, if the installation is too high, then the socket line can not be stretched so long, so it is better to put the socket in the middle of the lower position, so that it is good to avoid the high and low placement of the socket and also has a very great effect on the installation of the whole family operation. <>

Second, it can't be too low.

Of course, try not to put the socket in a too low position, especially not in the same position as the shoes, otherwise it is easy to hit the socket over and down, and even if you accidentally spill water into the socket, it is easy to leak, so it is not good to put it in a too low position, many families do not take this into account when decorating and installing the socket, only considering that the socket can not be placed too high, but it is not considered that the socket can not be placed too low, and it must be used. <>

3. The interface should be far away from the water source.

Of course, we should also pay attention to the interface away from the water source, especially the interface of some sockets, if it is close to the water source, it is easy to have some water leakage problems, this is to pay attention to, if you want to install a socket in the bathroom, you can be sure to install a waterproof cover, which is more reasonable to install a waterproof cover installed on the socket shell, and the installation of a waterproof cover is not very expensive, can play a protective role, I think it is very good. <>

To install in a convenient place, safety is also a concern. Convenience is the core of socket installation, and it is necessary to consider the convenience of users, otherwise it will not be able to be used; Consideration of safety is not to install near water sources and fire sources to avoid danger.

The living room is generally installed near the TV cabinet, the dining room needs more sockets, a large number of sockets need to be installed near the console, at least 4 sockets need to be installed in the bedroom, and the head of the bed needs to be installed.

The location should be reasonable, in line with the needs of humanized use, do not do the ground plug, do not make it too high, and do not make it too low, so that it is convenient to use.

If it is installed in the living room and bedroom, then the façade wall can be installed with a spare socket within the range of meters, and the general socket should be meters away from the ground, next to the washing machine, next to the TV, next to the refrigerator, and next to the air conditioner, as well as range hoods, electric water heaters, kitchens, and bathrooms should be installed.

It should be installed in a more secluded place, and it should also be particularly convenient, so that it can be more beautiful.

It is necessary to determine the location of the socket according to their own design, and the quantity must be enough, rather more than less, to think about the specific use of each socket, the quality should also be good, and the installation should be very safe.

When decorating, especially in the circuit transformation, it is necessary to determine the location of sockets and switches. The number of switches and outlets required for each room should also be confirmed. This is the layout of the switches and sockets in the room.

Depending on the location of our press and the location of the wardrobe, we should set up an outlet, and some wardrobes should have an outlet.

It's the age of the smart home. Some homes will consider installing motorized curtains in the future. If they don't install it for the time being, they will keep an outlet.

Leave an outlet near the curtain rod for backup. So we need to consider the layout of the switches and sockets in the bedroom. Just like a socket in a bedroom, one should be reserved on both sides of the bed.

Two sockets are reserved for the TV position, and a three-prong socket with a switch is reserved for the air conditioning position. If you have a computer, reserve a three-prong socket with a switch, and also reserve one or two sockets in the bedroom.

The switch is recommended to use a dome light switch with dual control or dual loop control. If there is an electric water heater in the bathroom, a three-pin socket with a switch should be reserved. If you have a washing machine, keep a three-prong socket with a switch next to the washing machine.

Keep a hair dryer socket next to the washbasin mirror. There is a socket next to the toilet. Then reserve 1 or 2 sockets in the corresponding place of the toilet, and there should be a switch for the lighting in the bathroom.

Don't forget the mirror lights and book a switch. Sockets on both sides of the bed in the bedroom are essential. At least two sockets should be installed.

You can use a desk lamp, a mobile phone and an iPad. Remember to install dual controls. If you turn off the lights at night, you don't have to get up and run to the door.

The position of the socket should not be blocked by the size of the furniture and the water and electricity unit, otherwise it will be wasted if it cannot be used. There are many appliances in the kitchen. At least 2-3 sets of sockets should be installed on the countertop.

It is better to bring a switch, otherwise it is dangerous to pull out the socket with wet hands. The installation height of the socket should be kept to the left and right.

1. The air conditioning socket should be about 1.7 meters above the ground. 2. There should be sockets on both sides of the bed. 3. Reserve an outlet next to the toilet. Fourth, there should be a socket next to the dining table. Fifth, from top to bottom of the kitchen, the location should be calculated and the socket should be reserved.

The location of the socket installed indoors needs to consider in advance which electrical appliances are planned to be purchased, and reserve a certain margin on this basis, so as not to have no supporting sockets to use after moving in. In addition, some high-power electrical appliances need to plan a separate socket line, which should not be shared with other sockets, such as air conditioners, bath bombs and other electrical appliances. The refrigerator also needs to occupy a separate line so that the power switch can be turned off when going out, but the power supply of the refrigerator needs to be retained separately.

Finally, the panel position of the socket also needs to follow the construction standards, such as the horizontal distance between the two sets of sockets should not be too close, and the socket should not be less than 30 cm from the ground, etc.

In the process of interior decoration, the installation of sockets is also very particular, generally speaking, it should be set as close as possible to the owner's habits.

Next to the TV, next to the air conditioner, against the wall of the bedside table, under the computer desk, etc.