-
Anonymous users2024-02-11Don't worry about normal, under normal circumstances, the computer needs a certain temperature, as long as the computer you said can operate normally, there is no problem, the different positions of the temperature sensing elements of the general computer will affect Master Lu's test, don't believe him Master Lu, it's okay.
-
Anonymous users2024-02-10A few reminders.
1 Ambient temperature changes. The temperature is rising day by day. It is normal for the temperature of the machine to become high, and it is natural for it to be.
2 No matter what software, whether it is everesr or a masturbation master, the temperature report provided is the reading of the motherboard's temperature measurement, even if it is two motherboards of the same manufacturer and model, the temperature measurement may be different, not to mention the difference in readings between different motherboards.
3 The temperature of your computer is very good now, and it will not cause adverse effects on the operation of the machine, it does not exist"I think it's too high"things. Don't worry about the change of two or three degrees. If you are too entangled, there will be one consequence: you and your wallet will not be able to get by.
-
Anonymous users2024-02-09Hehe: It's okay.
Also, Uncle Lu's measurement is not accurate, it is recommended to use GPUZ to measure 80 degrees, don't worry, if the A card is not high, haha.
If you are worried about the alarm in Uncle Lu's settings, then you can quickly adjust the temperature of the graphics card to 90 degrees and alarm it.
-
Anonymous users2024-02-08The calorific value of each CPU is different, you only turn on the computer at 36 degrees, and play games at 45 degrees, which is very good for heat dissipation.
-
Anonymous users2024-02-07Is it a laptop or a desktop?
The laptop can be added with a heat dissipation base, and it needs to be dusted after a long time.
Desktops can add case cooling fans, which also have dust problems over time, and there is also a need to replace the CPU and graphics card with better heat sinks, such as water cooling.
-
Anonymous users2024-02-06Check all the accessories first, if all the accessories are working properly and the CPU is also turning, it seems that your CPU is just a cooling issue and there are no other compatibility issues.
It is recommended to uninstall some irrelevant software,After testing, there are some ** upload software,A cool ah bean's upload software will affect the situation that the CPU overheating temperature is too high,Even if they don't run, it will have an impact,Restart after uninstalling and then observe the problem of CPU temperature being too high。
Change to a better CPU fan, and remember to coat it with thermally conductive silicone; At the same time, the heat dissipation in the case cannot be ignored, if the temperature in the case is too high, you can consider installing a case cooling fan.
The speed of the CPU fan is generally 2500-3000, if the hardware is overheated, it will automatically accelerate the fan, first of all, you should disassemble the chassis to clean up the dust of the hardware, the CPU temperature is a bit high, apply silicone to the heat sink, and then oil the fan, or see if the fan is defective or fixed, mainly because of the fan. The power supply fan just cleans the dust, the computer slows down mainly because the CPU temperature is too high or the memory is not good, the solution is to cool down the CPU, just wipe the memory module out. >>>More
The temperature of the computer is too high, it may be used for too long, or it may be caused by too much dust, you can clean up the dust, or you can add a heatsink or a fan under the computer.
1. The internal silicone grease of the CPU has expired, resulting in the heat of its CPU core cannot be transmitted to the outside in time, and the lid needs to be opened to replace the silicone grease. >>>More
Generally, computer overheating starts from three aspects. >>>More
The temperature of the graphics card chip is high, it will only ** or burn, but the CPU temperature should automatically shut down after 100 degrees.