A new laptop SSD only has 100G of space, but it s enough, and there is 70G of space left?

The advantage of solid-state is that the system and software can be opened quickly.

In the mechanical hard disk installed in the system, the boot time starts at 1 minute, and it takes 2 minutes for a long time; It only takes seven or eight seconds at the fastest time to install the solid state, and the slowest one is only ten or twenty seconds.

In the game installation of machinery,If it takes 1 minute to read the picture (personal experience,I used to use a junk computer,Only mechanical disk,Multi-person copies enter the map together,Everyone else ran to the boss to start fighting,I just finished loading),Then this game is installed in a solid state,It may only take more than ten twenty or thirty seconds to read the picture。

Some software can be opened in 10 seconds in a mechanical setting, and it may take only five or six seconds or less to open in a solid state.

But it doesn't bring any performance gains other than faster loading speeds.

And the loading speed of solid-state is also limited by your CPU.

The premise mentioned above is that the CPU can meet the performance requirements. The CPU is not good, you just use the solid state, and the loading speed is not much better than the mechanical disk.

In addition, the disadvantage of solid state is that it is expensive.

A good solid state should average more than 700 per t; As long as the mechanical disc 1t is less than 300, the larger the capacity, the cheaper, and more than 700 mechanical disks can be bought more than 6t.

Therefore, if you don't have any gaming needs, the purpose of adding a hard disk is only to store data, and the solid state is just to install some software for work and study, and the 70G solid state is completely sufficient. It is completely possible to add a mechanical disc to save costs.

Increasing the hard disk space has no acceleration effect on the speed of the computer, unless the previous system disk is full (the capacity of the SSD has reached more than 80%), after adding the new hard disk, move some large files in the system disk to the new hard disk to reduce the occupation of the system disk, which may have a certain effect of accelerating the system.

It depends on what your situation is, 1. You only have an SSD 100g, then you need to install a hard disk, otherwise all kinds of data and software are put together with the system files, and the running speed of the computer will be reduced. If you don't want to buy another hard disk, you can divide it into another disk (the normal size of the system is about 30-50g, and you still have 50g left), but then the system disk needs to be formatted, and the system needs to be reinstalled (this is more troublesome, Xiaobai is not recommended).

2. In addition to a solid-state disk, you have other mechanical hard disks, you can put the files in the mechanical hard disk, and the corresponding software will definitely run slower, but it will not affect the normal use.

Of course, the running speed of the SSD will be better than the ordinary one, but the premise is that the overall hardware of the computer can keep up, and the hard disk is an auxiliary equipment.

Be careful, don't put the software and data together with the system disk, you will regret it.

I hope mine can help you, and if you need to ask, you can always ask.

It should be normal, and the current win10 system is originally more disk space-intensive. Plus install some common software and virtual memory, temporary files, etc. It is relatively normal to have used about 60g.

Users can try to open the explorer, enter the folder options, put the two arrows, the first hidden front checkbox off the hook, the second check the single option before showing hidden files, and then press OK to save, you can see several previously hidden files on the desktop, and there will be a lot of previously hidden system files on the C drive.

Considerations for new PCs.

2. Reduce the number of repeated on/off times, and don't turn on the machine for a long time if you don't use it. Computer hard disks have a service life, and it is related to the number of reads and writes, and less power on and off can extend the service life of the disk.

3. Like all electrical appliances, don't use the computer when thundering.

4. Dust the chassis regularly, but prevent static electricity.

Because the cache of some software is put in the system disk。100 gigabytes of memory is not particularly large for a system disk, and usually at the beginning of use, the memory of the system disk will be relatively dozens of gigabytes remaining. But when we use it daily, we can find that the memory of the system disk is constantly decreasing, the first is the memory of the browser, for example, when we have something in the browser, then at this time it is put in the system disk by default, we can find these files from the file location of the browser, these files can be cleaned up regularly as needed.

The second is the installation location of the software, some people will install all the software into the system disk, because it is more convenient to use, but the problem is that all the software memory will also be put into the system disk. For example, when doing **, those ** materials will also be put into the system disk, often a software can occupy dozens of G, then the storage space of the system disk at this time is definitely not enough. <>

Therefore, it is necessary to clean up the system disk, first of all, to clean up the non-software part of the files. If you have a file on your own work, then you need to put it in other disks, and it is best not to put it in the system disk. Software installation can be placed on the system disk, and all their file caches need to be moved to the non-system disk.

For example, when the system is updated, there will be some update files left in the system disk, and if you don't clean it up, it will still exist. Therefore, regular cleaning can clean up the excess files in the system disk, and at this time, you can combine some computer security software to clean the system disk. If you don't know the file, it's best not to delete it.

Therefore, there are many reasons why the memory of the system disk is insufficient. At this time, you need to find out what kind of reason your computer is in, generally speaking, the most common is that all the content of some software is put in the system disk, then the storage of the system disk will soon bottom out. When the system disk memory is insufficient, it will make the computer very stuck, so the system disk will only put the system files in it, and other files should be put in other disks.

Because the computer will continue to produce a lot of garbage during use, these junk files will occupy the hard disk space, so it is full.

It may be that the system is running and produces a lot of junk files, or there is no such system optimization, or it may be caused by too much data.

It's because there are too many things in the hard disk, the quality of this hard disk is not very good, and the stored things are relatively large-capacity

The real capacity of the 128 SSD is 119g. But some SSDs will occupy 8G for maintenance, so if you subtract 8G, it will look like 110G. If you have 100g, then there is a problem. Let's take a look at the real capacity in Disk Management.

The real capacity of a 1T hard disk is 931G. Divide by 3, it should be 310. You're only 277, which is a bit small.

So, take a look at Disk Management. Maybe there are hidden partitions.

The biggest difference between solid-state and mechanical is speed, solid-state speed is very fast, several times the speed of machinery, and it will feel as smooth as flying when used to install the system. However, the materials used in the solid state are very expensive, 128 solid state can buy 500g machinery, the mechanical advantage is that the technology is mature, the capacity is large and low, 16TB nitrogen filling machinery, but the solid state does not have 10t, and the solid state of 5t does not appear.

1T mechanical 128 solid state is currently the mainstream formulation.

You know, the way hard disk manufacturers calculate the capacity of hard disks is different from ours, most of us are converted according to 1g=1024m, 1m=1024k, 1k=1024b, but the manufacturer's formula is 1g=1000m, 1m=1000k, 1k=1000b, so the actual capacity of the hard disk will be inconsistent with the label, the actual capacity of our 80g hard disk is only about 75g, but if the capacity is too different from the label, you should suspect the quality problem, Ask the manufacturer to exchange ......

Generally speaking, the memory size of the storage device is not 1:1024 but 1:1000 in business, so what the merchant advertises is not as big as what you see, but you are indeed smaller than the general one, and it may be that you have been pitted.

Specifically, you can ask the seller.

Partitions are going to take up space, and there are no pitfalls for you, and it's all like this.

Look at the hard drive after partitioning it.