What is the reason why the motorcycle can t add the throttle after adding the wrong oil to clean?

If the motorcycle is filled with the wrong oil, the throttle cannot be added after cleaning, and it may be that the fuel injector is blocked, so it is best to go to a professional maintenance office for maintenance.

Hello, the throttle can't be added up because the oil has not been circulated to various places, so there will be such a situation, and the oil can be passed, specifically like this, I hope it can help you?

Hello, according to the situation you described, add the wrong oil, the oil is green, and then now the car throttle can not be added is normal, you need to clean the fuel tank, clean all the oil with oil green, plus the new fuel, can be better, or just now drive and ride this tank of oil with oil to clean up all the oil, and replace the new oil will be better, thank you, thank you.

The motorcycle is filled with the wrong oil, and the oil cannot be added after cleaning, which means that it is still not cleaned. There are some places to slim the belly, if you unload some of his parts, you can clean them up one by one.

I think that the motorcycle is filled with the wrong oil, and the throttle cannot be added after cleaning, which is caused by adding the wrong oil to wash the residue.

It is normal for the motorcycle to be cleaned with the wrong oil, and if it can't add the throttle, because his oil has a delivery process, and it will be good to drive it for a while.

Generally speaking, the motorcycle can't add the wrong throttle, which may be due to other reasons such as lubricating oil. For example, the snow plug, some engine oil, etc., are gone, anyway, take it to a special repair shop for others to see.

It may be that there is some water in it, so there is no way to let the fish oil directly enter the pylorus, so the phenomenon of not starting is generated.

What is the reason why the motorcycle is refueled with the wrong oil and cannot be refueled after cleaning? Because you didn't completely remove it, you had to get rid of all your oil, and then you had to pay back the gasoline you said burned.

If you can't add the throttle after cleaning the wrong friendship, this is likely to be not clear inside, it is best to find a professional master to help clean it up, and then re-mail.

If this happens, it may be that you have added the wrong fuel to your motorcycle, so there is a malfunction in the engine, so it is better to clean the engine.

Don't worry, just take your time.

Hello. After the motorcycle is cleaned by mistake, it may be that the oil in the fuel tank has not been mixed well.

Hello, it may be that the gasoline plug of the motorcycle is clogged. You'll have to clean it up yourself.

What is the reason why the motorcycle can't add the wrong oil and can't add the throttle after cleaning? After the paint of this motorcycle is washed, it should not be cleaned inside.

If the motorcycle is filled with the wrong oil, it is already circulating in the system, so you need to clean the entire oil circuit.

Could it be that your mailbox is flooded? You can also look at whether there is water or not.

What is the reason why the motorcycle can't add the throttle after adding the wrong oil to clean? Still not thoroughly cleaned?

Close the damper, ignite and let the engine burn for two minutes, and test the mixing ratio of the carburetoretor.

What is the reason why the motorcycle can't add the throttle after adding the wrong oil to clean? You have to find a professional person to consult, go to the repair department to consult.

If you want to speed up the game, you should be able to get up the throttle.

I ate the wrong oil, and I can't get the throttle after cleaning, what is the reason, now there are many reasons.

There are many reasons that may lead to the motorcycle not being able to add the throttle, check whether the air filter, carburetor and exhaust pipe are blocked, clean or replace the air filter, clean the carburetor, and check whether there is a problem with the mixing ratio, oil level, oil needle, damper, etc. of the carburetor, whether the spark plug is bad, whether the high-voltage electricity is out of fire, whether the gasoline is not good, whether the gas distribution timing is wrong, whether the cylinder pressure is insufficient, whether the valve and intake pipe have air leakage faults, etc., which will cause the throttle to be unable to be added.

1. Failure of oil supply system.

At this stage, most of the motorcycle fuel supply system is carburetor, so we must first find the problem from the carburetor. Before finding a carburetor fault, you must make sure that the fuel is 100% devoid of water and that the air filter is not clogged.

2. Circuit failure.

Circuit faults can be solved by replacing spark plugs, igniters, and high-voltage packs.

3. Mechanical failure.

Mechanical failures, such as excessive valve clearance, wrong valve distribution time, etc.

Through the above inspection and maintenance faults can be eliminated, but when inspecting and maintaining, we must carefully observe the symptoms of the vehicle, which will allow you to take a lot of detours.

The reasons why the motorcycle throttle cannot be added are: 1. It may be that the mixture is thin or the oil cannot be added due to the lack of preheating after starting; 2. It may be a problem with the engine; 3. The carburetor is blocked or the mixed gas adjustment is unreasonable, the oil level in the carburetor float chamber is low, the valve clearance is too tight, and the spark plug is slightly broken and scattered.

The carburetor has some air intakes. It may be clogged inside.

The motorcycle can't be refueled when it's cold, and it can be solved without spending a penny, have you learned?

Motorcycles can't add up to the big throttle, and this failure involves a variety of possibilities, including the engine itself, the intake and exhaust, and the carburetor.

There are many aspects such as fuel supply system, ignition system, gasoline oil quality, etc., and each aspect may have a variety of reasons, so it can only be investigated separately for these aspects, first find the specific cause of the failure, and then debug, repair or replace the problematic parts.

If the motorcycle can't add the throttle, the first thing you should check is the air filter.

Check the air filter and carburetor and exhaust pipe for blockage.

Whether it is soaked in oil or blocked and cannot be ventilated, clean or replace the air filter, clean the carburetor, and check whether there is a problem with the mixing ratio of the carburetor, the oil level, the oil needle, the damper, etc., the concentration of the mixture can only be just right, too thick or too thin may cause the throttle to be unable to be added. Check whether there is a problem with the damper or if it is not used properly, but if it is just that the cold car can't add the throttle when it just starts, but the throttle can be refueled normally after the hot car, then there is no problem, and the damper can be pulled when the car is cold.

Check whether the gasoline in the fuel tank can flow normally, whether the fuel tank switch and gasoline filter and oil pipe are blocked, and whether the gasoline oil quality is not good. Check the spark plugs.

and high-voltage electricity for high-voltage lines.

If the high-voltage electricity is abnormal, check whether there is a problem with the spark plug, high-voltage bag, igniter, magneto, ignition switch, electric door lock, flame-out switch, etc., and whether the line between them is faulty. Check whether the valve timing is wrong, whether the cylinder pressure is insufficient, whether there is any air leakage in the valve and intake pipe, valve arm and camshaft.

Whether there is insufficient intake and exhaust air due to wear, etc., these may cause the oil to be infilled.

Before replacing the carburetor, if the acceleration performance of the vehicle is very normal, but there is a phenomenon that the oil cannot be added after the replacement, then it is still a little related to the adjustment or matching degree of the carburetor.

In general, replacing the carburetor is nothing more than oil leakage or poor atomization effect, and the matching degree when replacing the carburetor is definitely a problem that must be considered, although the shape of the carburetor is extremely similar, but its internal main measuring hole, plunger size, and oil needle thickness are all different, so if the replaced carburetor does not match the engine model, there will be no oil filling.

Secondly, the newly replaced carburetor also needs to be properly adjusted, after all, the adjustment of the new factory carburetor is a standard value, and there will be slight deviations when installed on the specific model, so the newly replaced carburetor also needs to be adjusted.

After the motorcycle has changed the carburetor, the throttle is always not added, which may be due to improper installation of the carburetor and air leakage.

A motorcycle carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the vacuum created by the operation of the engine. The carburetor is a delicate mechanical device that uses the kinetic energy of the inhaled air stream to atomize gasoline.

The important role of motorcycle carburetor to the engine can be called the "heart" of the engine. Its complete device should include a starting device, an idle device, a medium-load device, a full-load device, and an acceleration device.

Check whether the carburetor is improperly installed and leaking, whether the mixing ratio of the carburetor is incorrect, whether the oil level is too low, whether the electronically controlled damper of the carburetor cannot be half-closed, etc., in addition, the quality of the carburetor for 50 yuan is very bad.

Check if the new carburetor is speed limited, check if the carburetor throttle cable has a small clip, just remove it. If not, you can find the repair department to explain the situation, it is the problem of the oil needle.

I have been repairing the car for 12 years, and the problem you said is this, first of all, it may be that the carburetor model is wrong, the carburetor of the scooter looks similar on the outside, but it is different on the inside. What kind of oil surface is said upstairs, old carburetor or something, it shouldn't be. There is also the possibility that there is a blockage between the carburetor and the filter.

You can fight with the car, put up the throttle and see if there is black smoke in the exhaust pipe, I estimate that there will be 8 percent If you can't rule out the problem, you can contact me.

It is highly likely that the carburetor is old, or the oil needle in the carburetor is clogged and does not enter the oil.

I've encountered exactly the same situation as you before, the throttle is 30 yards in the end, and I asked the mechanic to clean the carburetor for 30 yuan, and the car is full of power after washing, and the throttle is 60 yards when I pull it gently.

It's definitely a matter of the carburetion.

I think it's all injectors, you can change one. Hehe.

Nor is it slaughtered. If you go there again, there's something in there that needs to be adjusted, and the person who changed it for you may forget.

What happens if the motorcycle throttle can't be added The carburetor is blocked or the mixture is improperly adjusted, the oil level in the carburetor float chamber is low, the valve clearance is too tight, and the spark plug is slightly broken and scattered. Motorcycle throttle plus from time to time first check whether the oil is too much, EFI car, can be solved by cleaning the throttle method, tire pressure is also a problem that can not be ignored, for some longer motorcycles to check whether the oil line is rusty, as well as the problem of electronic throttle, there is a relatively simple way is to buy a bottle of gasoline additives, which can also alleviate the problem of throttle can not be added.

How to clean the motorcycle oil road blockage.

If the oil circuit is blocked, the fuel additive specially used to clean the oil circuit can be added to the fuel tank, so that the oil circuit can be cleaned. If the oil circuit is blocked, it will cause the engine to have a lack of fuel supply, which will affect the power of the engine.

The engines of motorcycles and automobiles are fueled by a mixture of air and gasoline, and if the gasoline is insufficient, it will cause the mixture to be too thin, which will affect the work of the engine.

Therefore, after the oil circuit is blocked, it should be cleaned immediately to eliminate the fault.

And when you usually use the car, you must replace the gasoline filter on time.

Gasoline filters are used to filter gasoline, and if the gasoline filter is not replaced for a long time, it will cause the oil circuit to be blocked.

When replacing the gasoline filter, be sure to choose a big brand of regular products, the use of inferior gasoline filters will also cause the oil circuit to be blocked.

When adding fuel additives, be sure to add them in accordance with the specified amount, and do not add too much.

If it is added in excess, it is harmful to the engine.

When buying fuel additives, you must also choose the best products of big brands.

Many low-quality fuel additives are corrosive and can damage the engine. (Photo by Q&A: Q&A called the beast) @2019

If you've replaced your carburetor but your motorcycle's throttle still won't accelerate, there could be a few reasons for this:

Fuel Issues: In addition to the carburetor, there are other fuel**-related components, such as fuel pumps or fuel filters. Check that these components are working properly and that the fuel** is unblocked.

Air** Issues: Make sure the air filter is clean and not clogged. Rotten LiquidIf there is not enough air**, the engine may not work properly.

Ignition System Issues: Check the ignition system, including spark plugs, ignition coils, and ignition switches. If the ignition system fails, it can cause the engine to not work properly.

Fuel mix ratio issues: The adjustment of the carburetor may need to be set precisely according to the model and specifications of the Lichang car in the motorcycle. If the mixing ratio is incorrect, it may cause the throttle to fail to accelerate.

This engine is burning oil, and there is no way to increase the gas pedal. This phenomenon occurs mainly because the engine is overworn, and the pressure of the engine is relatively low, which will lead to serious oil burning, and the speed of the fuel throttle engine cannot be increased. This is mainly due to excessive wear and tear in the engine, this phenomenon occurs, it is possible that this is the piston ring or the cylinder wall wear gap is too large, this needs to be treated, the liquid is buried and the engine needs to be disassembled and overhauled before the fight.

Summary] This engine burns oil, and there is no way to increase the gas pedal. This phenomenon is mainly due to excessive wear and tear in the engine, and the pressure of the engine is relatively low, so it will be answered that the rise of this phenomenon leads to the burning of engine oil, and the speed of the fuel throttle engine cannot be increased. This is mainly due to excessive wear in the engine, this phenomenon has occurred, it is possible that the piston ring or cylinder wall wear gap is too large, this needs to be dealt with, you need to disassemble and overhaul the engine.