How to reasonably design a bathroom with a length of two meters and a width of one meter five?

Updated on home 2024-06-27
6 answers
  1. Anonymous users2024-02-12

    The remaining space is only about one meter, and there is also a toilet (squatting) and a shower in it, so that the toilet function is complete. The toilet is made into a concealed water storage tank type, and the indoor space occupied is not easy to exceed square meters, or squatting should be used to do not occupy indoor space; If the bathroom assembles the household water heater, install it at the highest point on the toilet, the shower shower design scheme is on the opposite wall, and the indoor space is sufficient for the power circuit lighting fixtures when taking a bath, and the door (outside) is set to open more, operate the two lights inside and outside the toilet, the bath bomb switch, and manipulate the shower to integrate the bath bomb at the decoration ceiling; The toilets are equipped with automatic washing machines and electric water heaters.

    Socket, live together. All in all, the house is small, the role is complete, the large house has, my family also has, happiness is not reduced because of the family!

    How to effectively design a toilet with a length of 2 meters and a width of 1.5 meters? The 2-meter-long toilet can be protected with hinged doors.

    There are toilets with windows and doors in the middle, and shower equipment, a washbasin outside the protective room, changing clothes and other items, automatic washing machines, etc. I firmly believe that this arrangement is the final reasonable layout of many people with similar room types, but as a result, that kind of installation is not right from the beginning, why? The most important factor depends on the low utilization rate of space, according to the original engineering building embedded sewerage.

    Pipes, a bathroom cabinet with a length of 800 at the gate, and then a toilet, the shower shower only knocks down the opposite wall, the first feeling is small after coming in, the second experience is strange in the case of bathing, after taking a bath, all the water will splash on the toilet, and it is inconvenient to finish it down, <>

    Take a closer look, in fact, the seat of the toilet has been inadvertently moved in Feige's adjustment. After adjustment, Feige independently developed a separate shower area for this toilet, the total width is 750, the dry and wet partitions were carried out, and the toilet area was pre-embedded with a total width of 700, in order not to look congested, Feige turned the washbasin design scheme into a semi-embedded type, with a total width of 600, through that adjustment, do you feel a lot! But the core of it all depends on the fact that the toilet must be moved!

    Speaking of this, many readers are likely to say that the toilet cannot be moved, and it is very easy to block when it is displaced, but here, what Fei Ge is talking about is, seriously, is it really easy to block the toilet when it is moved? Not necessarily! It's just that many people don't know Phineas's killer feature of remodeling the bathroom.

    Well, what is it? That is: wall-hung toilets, naturally so powerful and shining, there is a taller and more high-grade name: wall-hung toilets.

  2. Anonymous users2024-02-11

    You can put a toilet in the bathroom first, then create a bathroom cabinet, and then isolate a bathing space in another space.

  3. Anonymous users2024-02-10

    If the sewer pipe in the bathroom is in the front, then the door of the bathroom can be opened on one side, and the bathroom can be arranged in an L-shape. The other is that the toilet is located at the back of the bathroom, so the first thing we see when we open the door is the washbasin, then the washing machine, and finally the shower room and toilet. If this is the case, then the space left for the washbasin in the whole bathroom is very large, and the toilet position next to the shower room will be very crowded.

  4. Anonymous users2024-02-09

    Do not place the bathtub when installing, the toilet and the washstand should be placed in the same direction, the shower should be in the opposite direction, do not place too many sundries, and you can install a lattice cabinet in the corner for effective storage.

  5. Anonymous users2024-02-08

    Summary. 1.To arrange a bathroom with a length of 6 meters and a width of 1 meter 2, the bathroom can be divided into three sections, in order of shower area, toilet area and toilet area.

    2.The shower area can be placed with a shower room, and a sink and locker can be added to the shower room to make it comfortable. 3.

    A bathroom cabinet can be placed in the washroom area for convenient storage of toiletries, and a floor mirror can be installed on the bathroom cabinet for easy makeup, etc. 4.A toilet can be placed in the toilet area so that it can also be used more freely in a closed toilet.

    In addition, you can add a small flush toilet next to the toilet so that you can use two toilets. 5.Finally, you can choose the decoration materials and tones of curtains, floors, and walls according to your preferences.

    1.Arrange a bathroom with a length of 6 meters and a width of 1 meter 2, and the toilet can be divided into three bureaus and sub-sections, which are the shower area, the washing area and the toilet area. 2.

    The shower area can be placed with a shower room, and those close to the shower room can be added to the washing tonghong table and lockers, so that people can have a comfortable experience. 3.There is no shed in the bathroom area to place a bathroom cabinet, which can easily store toiletries, and install a floor mirror on the bathroom cabinet to facilitate makeup, etc.

    4.A toilet can be placed in the toilet area so that it can also be used more freely in a closed toilet. In addition, you can add a small flush toilet next to the toilet so that you can use two toilets.

    5.Finally, you can choose the decoration materials and tones of curtains, floors, and walls according to your preferences.

    My suggestion is this, sir, take a look.

    What do you think, sir, are you satisfied?

  6. Anonymous users2024-02-07

    The bathroom of Mi2 will be relatively small, so when designing, we must pay attention to the spatial layout of the bathroom, and we must design the needs well.

    2. It is best not to install a bath, because the space is relatively limited, but you can use a toilet, and it is not recommended to put too many decorative ornaments in the bathroom.

    3. Try to keep the characteristics of simplicity and generosity, if you want to decorate appropriately, you can put some green plants as decorations.

    Because the bathroom is an area with a large amount of water consumption in the home, it will be more humid, so you must be extra careful when following the lights and wires, the lamps and switches must be used with safety protection functions, and the joints and latches should not be exposed to the outside.

Related questions
10 answers2024-06-27

I don't know how long and wide your bathroom is? I can only give you a rough calculation: 1 >>>More

7 answers2024-06-27

A rectangular copper plate, 200cm long, 60cm wide with the calendar, 1 cubic decimeter thick = 1000 cubic centimeters. >>>More

26 answers2024-06-27

The Buddha statue is five meters away from the bathroom, and it is usually not related to the bathroom, and there is no obstacle to facing the bathroom door, so there is no problem.

10 answers2024-06-27

The size can be selected according to your own needs, most of the toilet is about 70 in height, 70 in length, the smallest is about 62, the big one is 72, 3, the width is between 36 and 40 37, 38 or so is more common The unit is all centimeters, and the installation hole position under the toilet bowl 30 and 40 are national standards. There is also a saying that it is 28, 38The two are actually the same, just the edge of a measuring hole and the other the center. >>>More

8 answers2024-06-27

The main types of wire ropes in the domestic market:

1.Phosphate coated wire rope (Chinese patent), the steel wire is phosphated by manganese or zinc-manganese, the surface of the steel wire is very wear-resistant, effectively inhibiting the occurrence of fretting wear, is the upgraded product of the smooth wire rope, the service life in the atmospheric environment far exceeds the smooth wire rope of the same structure, including the imported smooth wire rope (the current fatigue life of the phosphate rope is about three times that of the smooth rope, and in the future, with the in-depth research on the wear-resistant phosphate liquid, it may be greatly improved, and the fatigue life can be compared through the fatigue test. Phosphate film 3-60 grams m2, the steel wire is not drawn after phosphating, and the wire rope is directly twisted, note - can not be confused with the phosphating of the rope wire with the drawing of the rope phosphating), foreign countries have been in the cottage China's phosphate coating wire rope innovation technology. >>>More