How many sizes of squatting pits and toilets are placed in a 4 square meter bathroom

The size can be selected according to your own needs, most of the toilet is about 70 in height, 70 in length, the smallest is about 62, the big one is 72, 3, the width is between 36 and 40 37, 38 or so is more common The unit is all centimeters, and the installation hole position under the toilet bowl 30 and 40 are national standards. There is also a saying that it is 28, 38The two are actually the same, just the edge of a measuring hole and the other the center.

The general toilet size is designed according to the size standard of the toilet, the so-called toilet size essentially refers to the pit distance, that is, the distance between the puddle and the wall, there are 200mm, 300mm, 400mm, and most of them are 300mm pit spacing. Toilet size also includes the size of the water tank and water sewer pipe. There are 6L, 9L, and several kinds of water tanks, and the outer diameter of the sewage pipe is mostly 110mm.

The area is large enough, according to your own preferences, the location is suitable, and you don't have to worry about the size.

General standard toilet: 900 (w) 1200 (d) 1900 (h) When building a squatting platform, the depth of the squatting platform should be built to a deep, wide squatting pit and squatting pit between 1000mm public health partition: 800 * 900mm is a relatively small size

The specific method is generally brick masonry, that is, 2 bricks are built at the step. The bricks used on both sides when squatting steadily, the rest are backfilled sand, and then the bricks are directly laid. However, when we set the quota, we all applied sporadic brick masonry and m3.

Standard toilet: 900 (W) 1200 (D) 1900 (H).

2. When building the squatting platform, the depth of the squatting platform should be 1250mm

3. 1000mm public health partition between deep and wide squatting pits and squatting pits: 800*900mm is a relatively small size.

I believe everyone knows that the toilet or squatting toilet in the bathroom is a vital tool. However, due to the high cost of the toilet, the squatting toilet is the best choice for ordinary families. So, what is the size of the bathroom squat pit?

What should I pay attention to in bathroom decoration? Let's find out together!

1. What is the size of the toilet squatting pit?

The size of the toilet squat pit is: 900 (W) 1200 (D) 1900 (H). In fact, we must not be sloppy in the selection of the size of the bathroom squatting pit.

Because this can not only show the owner's taste, but also determine the success of the bathroom decoration.

2. What should I pay attention to in bathroom decoration?

1. Pay attention to lighting.

Because most families have a relatively small bathroom, it will inevitably give people a sense of oppression. If you want to alleviate this feeling of depression, you can start with the lighting in the bathroom. Because the bright space can give people a sense of transparency and spaciousness.

For example, when decorating the bathroom, we can open a window, so that the brightness of the bathroom can be improved.

2. Pay attention to ventilation.

We all know that the bathroom is the one area with the most odors. It can be seen that the ventilation effect of the bathroom is very important. But for the owner, whether it is moisture or bad smell, it is not good.

Therefore, when we are decorating the bathroom, we must ensure its ventilation effect. Even if we can't get rid of the smell in the bathroom, we have to find a way to let fresh air in. For example, we can install ventilation equipment so that artificial ventilation can be carried out.

Summary: The above has introduced to you what is the size of the bathroom squatting pit and what to pay attention to in the bathroom decoration. If you want to explore more articles related to toilets, you can **** Qeeka Home again, and the content will be more exciting.

Now there are still very few family bathrooms installed in the squatting pit, but before the installation of the bathroom squatting pit, you need to reserve a wide enough position in advance, otherwise too large or too small will affect the normal installation of the squatting pit, so friends who are ready to install the squatting pit want to know how much size is appropriate for the squatting pit? What is the size standard for toilet squatting pits? We'll answer the questions for you.

What size is generally reserved for a squatting pit?

The distance from the wall should be at least about 300 mm, generally speaking, it should not exceed 450 mm, and the distance between the pit and the wall must be determined before installation, as well as the location of the squatting toilet and the position of the water should be determined.

1. The general size of the squatting toilet trap is: length: 585mm * width 470mm * height 296mm.

2. Purchase squatting toilets, the bathroom must be left with a good squatting pit squatting toilet installation size is generally fixed, there are several different sizes on the market, mainly 520x420x x420x x450x x420x x430x x430x190 These options.

3. The pit distance refers to the distance between the center of the sewer pipe of the toilet and the wall, generally 300mm, 350mm, 400mm, 450mm, etc. Choosing the right toilet starts with choosing the right pit spacing. Conventional reserved clean wall toilet:

The back is 300mm away from the wall, and the side is not less than 500mm. (The distance between the center of the toilet is generally as follows: mm) The distance between the squatting on the wall is 650---700mm behind the squatting on the regular reserved wall, and the side is not less than 450mm.

Bathroom squat pit size standard

The standard size of the toilet squatting position should be about the length and width. The depth of each urinal standing position (including urinals) should be pure tanky width, and the distance between urinals should be.

The width of the opening aisle outside the single-row toilet stall in the toilet should be small, and the source should not be less than; The width of the aisle outside the door of the double-row toilet should be appropriate. The depth of the trough flushing toilet shall not be less than, the width of the bottom of the trough shall not be less, and the upper width shall be shall. The area of the toilet management room should be 4-12, and the area of the tool room should be 1-2.

Normally, the distance between the squatting pit and the wall should be at least about 300 mm, generally speaking, it can not exceed 450 mm, and the standard size of the bathroom squatting position should be about long and wide, so we need to strictly follow these dimensions when installing the squatting pit, so that the squatting pit can be successfully installed.

Summary. Pro, the squatting pit ruler is 900mm by 1200mm obedient 1900mm, and then the distance between each toilet partition door j is to. When setting up public toilets, it should be noted that the stoolroom, urinal room and washroom should be set up separately, and each squatting position should have an independent space, and then the area of the space should be 1

More than 5 square meters. Also, male. The indoor clear height of the shared toilet should be above to facilitate air circulation.

Pro, the squatting pit ruler is 900mm by 1200mm obedient 1900mm, and then the distance between each toilet partition door j is to. When setting up public toilets, it is necessary to pay attention to the excavation, the stoolroom, the urinal room and the washroom should be set up separately, and each hand squatting position should have an independent space, and then the area of the space should be 1More than 5 square meters.

Also, male. The indoor clear height of the shared toilet should be above, which is conducive to air circulation.

The standard size is generally 650mm-750mm as the conventional size, except for special modeling doors. When setting up public toilets, it should be noted that public toilets generally need to be barrier-free to design the Tongjian Bridge required passages, and the ground should be non-slip and not waterlogged, and its width should not be less than 1channel, and the ground should be non-slip and free of water, its width should not be less than.

The graphic design of the public toilet should be divided into separate rooms, and each room should have a strong and independent function, and the urinal should not be set up in the open air. In addition, the entrance door of the toilet should be set up at the door of the male and female passage, shielding the wall or object, each toilet should have an independent unit space, and the partition of each unit space and the distance between the door and the ground should be greater than 100mm, less than 150mm.

Generally, it is 30 cm and 25 cm, and the distance between the pit should be measured when buying a squatting toilet. Be sure to consider whether your bathroom has tiles. The amount of posts is accurate.

There are many pit distances for squatting toilets, from 180 200 205 220 230 260 280 300 330 There are many pit distances from squatting toilets, and the inlaid squatting toilets are not stable.

You have to buy one first, and then leave a pit distance.

Squatting toilets have a front and a back outlet. The model is different, and the pit spacing is different.

Because the sewer pipe is connected to the squatting toilet from behind. The other is for convenience, and there is room for it. So you can't lean against the wall.