What is the depth of the heating valve well, what is the depth of the water supply, heating and drai

Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

It should also be decided according to the diameter of the water pipeline and valve.

Normally, each one is done separately or one per pipeline.

The buried depth of water supply, heating and drainage is designed according to the requirements of GB50015-2003 "Code for Design of Building Water Supply and Drainage".

The covering depth of the 353 outdoor water supply pipeline should be determined according to factors such as soil freezing depth, vehicle load, pipeline material and pipeline crossing. The minimum covering depth of the top of the pipe shall not be less than below the soil freezing line.

The depth of the pipeline covering under the roadway should not be less than. The buried depth of domestic sewage connection pipes shall not be higher than the soil freezing line, and the covering depth shall not be less.

When the diameter of the pipeline is DN300-500 mm, an inspection well is set every 75-100 meters; 600-1200 mm is set every 150-200 meters.

The depth of the geothermal heating well varies from place to place. Because the amount and depth of underground hot water resources are different, there are many special hot water resources that gush out of the ground like springs.

For example, when I went to the sanatorium in Xiongyue, Liaoning Province, there were hot springs gushing out of the river nearby, and the hot gas at the springs rose in winter, and in recent years, the amount of hot water extraction has increased, which has lowered the level of hot water there. However, in many areas rich in hot water resources, such as Xiongyue and Xingcheng in Liaoning, dozens of meters of deep wells can pump hot water.

Another example: my area eats deep well water, and there are also wells that are hundreds or even more than 1,000 meters deep, and the pumping out is still more than 20-30 degrees of warm water.

Geothermal wells refer to the ground source heat pump system, and the depth of the well is related to the local geological rock formation, and the good geological layer is more than ten meters, dozens of meters, and there are several hundred meters of bad luck. The general vertical buried pipe loop can exchange cold and heat with rock and soil through a closed geo-energy heat exchange system buried 50-150m below the ground surface through vertical drilling.

Ground source heat pump system: Ground source heat pump system is an environmentally friendly energy utilization system that uses shallow ground energy for heating and cooling. The ground source heat pump system usually transfers the heat or cold in the underground soil to the required place, and also makes use of the huge heat and cold storage capacity of the underground soil, the ground source transfers the heat from the underground soil to the building in winter, and then transfers the cold energy of the underground to the building in summer, forming a cold and heat circulation system in an annual year to achieve the function of energy saving and emission reduction.

The ground source heat pump system is a heating and air-conditioning system composed of a water source heat pump unit, a geothermal heat exchange system and a system in a building with rock and soil mass, groundwater or surface water as the low-temperature heat source. According to the different forms of geothermal energy exchange system, ground source heat pump system is divided into underground pipe ground source heat pump system, groundwater ground source heat pump system and surface water ground source heat pump system.

This has something to do with the temperature and quantity of water, and has little to do with the depth of the well.

Upstairs makes sense, if there is a vacuum between the groundwater level and the surface, then he is correct, but it is not, the correct answer is, not necessarily, but considering the cost of manufacturing a hand-shot well.

It is directly related to the depth, but the hand pressure well is generally small-scale household water or other water, there is no need to spend a lot of money to manufacture, generally between 5-15 meters, but there are always exceptions...

The atmospheric pressure is 10MPa. So the vacuum height of absolute water is.

So the maximum depth of the hand-shot well is:

Are you a soil source or a water source, if du

It is the water source

Refer to your local DAO

Hydrological conditions are not applicable to all special areas, remember that the recharge well must be done!. If it is a soil source, it is generally 50 to 100 meters, this should be calculated in detail, and the soil source must be returned to the temperature extracted from the soil in winter with air conditioning in summer, otherwise it will not be hot after a few years!

Does it depend on whether you are using shallow geothermal energy (geothermal source pumps) or medium-deep geothermal water? If the shallow geothermal energy is generally at a depth of 50-200m, if the medium and deep geothermal water is generally 2000-3000m, this is related to the final required temperature and water volume.

The valve well is not clear It belongs to the construction site to visit the site The best natural gas valve is a PE ball valve with all-welded rigid plastic conversion.