Reinstall the desktop computer system with a USB flash drive, and you can t enter the page after the

I can install a system, and I won't get this.

Hello friends:

You can use a CD-ROM or a USB flash drive, and then set the CD or USB flash drive to boot, and you can reinstall the operating system, so that you can enter the interface of the operating system normally.

Hope it helps you and I wish you happiness

If you don't start the USB flash drive, you can only take it to the computer repairer.

Boot with a USB flash drive or CD and reinstall it.

You can only reinstall the system, and you don't need to enter the CMOS settings.

It is recommended to use a USB flash drive to complete the reinstallation of the system.

Forced shutdown may lead to file corruption! It is recommended to make a U disk (memory card plus card reader is also OK) or a disc to make a PE, reinstall it from the PE, a PE is fully functional, and the small one is dozens of megabytes! It's very fast, and it's relatively fast to install the system from the inside of the PE, and it takes more than half an hour to get it done!

And not afraid of the unexpected! Or engrave the system disk! Boot from disc!

Reinstall it.,It's not possible to try a few more U disk boots or use discs.。

Generally, it is solved by reinstalling the system, you can try it!

In this case, it is recommended to reinstall the system

1.Press the F2 button to enter the BIOS settings interface and select Advanced BIOS Features;

2.In the Advanced BIOS Features interface, first select Hard Disk Boot Priority;

3.Hard Disk Boot Priority Selection: Use the plus and minus signs "+" on the keypad to select the mobile device, and select the USB flash drive on top.

4.Then select First Boot Device: Select USB flash drive to boot.

5.Then reboot to start the step-by-step installation, the installation process will be restarted several times, just wait.

Hello currently due to the part of the computer on Windows

The compatibility support of 10 is not perfect, and some users have failed to upgrade after upgrading, cannot start normally, and have been restarting.

In order to protect the security and stability of users' computers and upgrade for users more safely, 360 will suspend the upgrade of win10.

Is your image file wrong?

Maybe there's something wrong with the image of this installation.

When the computer is turned on, the verifying dmi pool data...Reason: It is because of the data loss of the hard disk in your computer, it may be because you have formatted the hard disk and Windows cannot boot!

Press Any Key to Restart Boot from CD:" means to boot the computer from the Windows installation CD. Workaround:

As long as you reinstall the system once with the Windows installation CD, you're good to go. However, during installation, you should set the CD as the first boot item in the BIOS, that is, boot from the disc (CD ROM), and recall the hard disk as the first boot item after installing the system, that is, recall the hard disk to boot (Harddisk). Try to repair the system first 1, boot press f8 to do not move to the advanced option appears in the let go, select "the latest correct configuration" enter to repair.

2. Please boot the computer and press F8 to enter the safe mode, use the system's built-in system restore, restore to the time when you did not have this failure to repair (or use the restore software to restore the system). 3. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired. 4. If the fault persists, set the optical drive in the BIOS as the first boot device, insert it into the system installation disk, press the R button, and select "Repair Installation".

5. If the fault persists, it is recommended to reinstall the operating system.

Let's talk about it in detail, have you already formatted it, and have you copied the files? If not, it will be automatically replaced from hard disk boot if it can't be booted from CD, if it still doesn't work, you enter the BIOS will change from CD-ROM boot to hard disk boot, there should be a boot option in the BIOS, which has 1st boot from

Recommended steps:

1. Restore BIOS factory settings.

2. Save and exit.

3. Reset the boot mode to: *** cd rom4, save and exit.

5. Put it into the boot disk and guide the system to install.

Set it up in BIOS1... It should work logically. There is one in the advanced settings.

Bootstrap options. Starts with boot. Some are listed separately.

For example, first boot, secnod boot, other boot, select hard disk boot in first.

Make a U disk boot disk directly into PE, and then format the C disk and then reinstall it.

The inability to turn on normally is nothing more than a problem with the power supply (there will be a problem with the capacitor bulging) and a hard disk failure, take it to the computer store to take a look, replace it, and see if it can solve the problem.

Let's reinstall the system with a USB flash drive. I can elaborate and teach you by hand.

You can go into PE, fix it, if not, just look at my avatar and help you remotely.