The car rattled when it was in the right direction

First of all, confirm that this abnormal noise is emitted from **. Otherwise, there are so many components in the steering system of the car, which is undoubtedly looking for a needle in a haystack, and the problems will be different depending on the sound.

1. The sound of the turn signal returning.

If the turn signal is turned on at the same time as the steering, then the sound may be the sound of the rebound clip of the turn signal automatic return mechanism, which needs to be confirmed by the car owner, if so, then this is a normal situation. Sometimes you will hear more than once, at that time, because of the amplitude of your rotation of the steering wheel, the directional column has three automatic return positions in one circle, and if you turn the steering wheel once, then it will sound three times.

2. The abnormal sound emitted by the dust jacket of the direction column.

If the noise is coming from under the steering wheel, it may be an abnormal noise from the dust jacket of the steering column. Due to the lack of lubrication of the steering post boot, there will be a friction sound. In this case, the owner only needs to apply some butter to the dust jacket, and the abnormal noise will disappear.

A wheel-shaped device used to control the direction of travel for automobiles, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft.

The original cars were controlled and driven with rudders. The violent vibrations generated by the car while driving are transmitted to the driver, making it more difficult for them to control the direction. When the engine was relocated to the front of the car, the driver could no longer use the rudder to drive the car due to the increased weight.

The result is a new design of the steering wheel, which introduces a gear system between the driver and the wheels that is flexible and insulates from the harsh vibrations of the road. Not only that, but a good steering wheel system gives the driver a sense of intimacy with the road.

Abnormal steering wheel noise will occur in cars of various brands and ages, and the causes of abnormal steering wheel noise are also complex and diverse, many people will also be troubled by abnormal steering wheel noise, and the following summarizes several common causes of abnormal steering wheel noise. Remind you to do an inspection: 1. Friction between plastic parts of the vehicle The friction between plastic parts may cause abnormal noise of the steering wheel.

The steering wheel is made up of various plastic parts.

In this case, it is generally possible that the steering machine is faulty, and it is recommended to go to the repair shop to check it.

The problem of abnormal noise in the car is very common to ordinary car owners.

It is difficult to distinguish which ones are abnormal noises and which ones are reasonable abnormal noises. When I went to the repair shop to test the vehicles with abnormal noise, only nearly 20% of the cars really had problems. In the case of a turbocharged engine, there is a must be a difference between the sound and the sound of a naturally aspirated engine; Models with engine guards may also make noises due to friction; After some car owners come into contact with different cars, it is likely that due to their lack of understanding of mechanical knowledge, they mistake reasonable abnormal noise as a vehicle failure.

Turn the steering wheel to hear the sound is made from outside the car, this may be the sound of the plane bearing of the shock absorber is short of oil, you just need to open the cover to listen to whether the sound is from the position of the top seat of the shock absorber, so that you know whether it is the sound of the plane bearing of the shock absorber, the plane bearing of the shock absorber sounds, you can apply some butter on the plane bearing, if it still rings after coating, it can only be replaced.

Generally, there are many reasons for this situation, such as the sound of the turn signal returning, which is normal, or it may be the abnormal sound of the steering column dust jacket, the friction between the plastics, the abnormal noise from the steering wheel, the abnormal sound from the plane bearing of the shock absorber or the abnormal sound from the balance bar.

The gurgling sound may be caused by one of the following problems and needs to be checked.

1. The plane bearing of the shock absorber makes an abnormal sound.

2. The abnormal sound emitted by the balance bar.

3. The abnormal sound emitted by the dust jacket of the direction post.

4. Abnormal noise coming from the steering wheel. The above 4 are all different reasons and need to be investigated one by one.

If it is recommended, go to the store to give you a free inspection, all within the warranty period, and it's nothing, just take a moment to ask a question 1

If the plane bearing of the shock absorber makes an abnormal sound, if it is a gurgling sound made by shaking the steering wheel in situ, then it is likely to be the sound of the plane bearing of the shock absorber due to the lack of oil, you just need to open the head cover to listen to whether the sound is from the position of the top seat of the shock absorber, so that you can know whether it is the sound of the plane bearing of the shock absorber, the plane bearing of the shock absorber sounds, you can apply some butter on the plane bearing, if it still rings after coating, it can only be replaced.

First, if it is a sound in the car.

1. The sound of rebounding the clip after the turn signal.

If the steering wheel will have this sound after hitting the steering switch, it is the sound of the rebound clip of the turn signal automatic return mechanism, and this sound is normal. If you hit the steering wheel, there will be a pimple, and the steering wheel will turn around and it will appear three pimple sounds, because the steering column has three automatic return card positions in a circle, so this sound will appear. As soon as you turn off the turn signal, the sound will disappear.

2.The sound of the direction post dust jacket.

Whether you are in place or driving as long as you hit the steering wheel, you will hear the sound coming from under the steering wheel, you should check the steering post dust jacket, once the steering post dust jacket lacks lubrication, it will produce a dry friction sound, you just need to apply some butter in the dust jacket This sound will disappear.

3.The sound emitted by the interference of the airbag hairspring.

When playing the direction, the sound is emitted from the steering wheel, most of this problem is caused by the interference of the airbag hairspring in the steering wheel, remove the steering wheel airbag hairspring and apply some butter to see if it still sounds, if it still rings, replace the airbag hairspring, because the airbag hairspring is damaged.

Second, if it is a sound outside the car.

1.The sound of the flat bearing of the shock absorber.

Hit the steering wheel to hear the sound is made from many outside the car, this may be the sound of the plane bearing of the shock absorber is short of oil, you just need to open the front cover to listen to whether the sound is from the position of the shock absorber top seat, so that you know whether it is the sound of the plane bearing of the shock absorber, the plane bearing of the shock absorber sounds, you can apply some butter on the plane bearing, if it is still loud after coating, it can only be replaced.

2.The sound of the glue loosening of the balance bar.

The sound is not emitted from the plane bearing of the shock absorber, it is necessary to check whether the balance bar rubber is loose or damaged, the balance bar rubber is loose and damaged, not only will it sound when playing in the direction, but also make a sound when crossing uneven roads, and the loosening of the balance bar rubber can be solved by adding a gasket, and if it is damaged, it can only be replaced.

There is a certain relationship between the abnormal sound of the steering wheel and the change of temperature, and it may be that the steering column is faulty, the plastic will become hard after the temperature drops, and there will be abnormal noise when the steering wheel is played, and there will be friction when the gap is small when turning, and the run-in can be returned to normal after a period of time, depending on the situation. If the abnormal sound of the steering wheel is a normal phenomenon in winter, because the plastic parts on the steering wheel produce friction, resulting in the gap of the car when rotating, this fault does not need to be dealt with, and the normal use can be resumed by waiting for the weather to warm up, if it is abnormal noise during the run-in period, it is normal to resume normal use after the run-in period, and if there is abnormal noise after the run-in period, the steering wheel needs to be reinstalled.

The most likely reason for the squeak analysis is the following: if there is a problem with the steering wheel steering mechanism, there may be a lack of oil, or there may be a large gap, or there may be a problem with the steering mechanism of the tire, it is recommended to go to a regular store for inspection.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts.

Question: Is it a bit crooked that the new car has only appeared for more than half a year?

It's been a month before the question.,Replace the right lever without warranty.,How much is the original Skoda Komic direction machine.。

Question Okay, thank you.

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

Oh, I went to the 4s point and checked it and said there was a problem with the steering machine.

If there is such a sound when hitting the direction to the right, it is necessary to check the steering column cross shaft under the steering wheel to see if it is loose, and it is necessary to check the lever ball head of the steering machine to see if it is loose, and it is necessary to check the rack in the steering machine to see if there is a large gap, mainly to check these parts. [Answer].

The abnormal sound of the car hitting the steering wheel may be due to a problem with the steering mechanism of the steering wheel, it may be a lack of oil, it may be too large a gap, or it may be a problem with the steering mechanism of the tire.

Hello, happy to answer your questions.

If there is a slight sound in the direction of the car, it is necessary to check the steering column cross shaft under the steering wheel to see if there is a loose gap, and it is necessary to check the note in the steering machine to see if there is any wear, and it is necessary to check the ball head of the steering machine to see if there is a problem.

Q: Do I need to change the steering machine? What should I do if it still rings after I change it?

Ask a question! Thank you.

There is a rattling sound in the direction of the car, and I think it is possible that the steering wheel is malfunctioning, or because your tire is pressing on something, or it is also possible that this phenomenon will occur.

Hit the steering wheel on the spot and there will be a sound.

If there is a gurgling sound when turning, it is a problem with the position of the suspension and ball joint, usually after the soft rubber pad is worn, the sound of friction between the parts and the parts, if the above situation is excluded, there is still a sound, check the swing arm and half shaft, direction machine and the like, and check the chassis.

Analysis of the causes of abnormal noise when the car is steering, and suggested solutions

1. The friction steering wheel between plastic parts is composed of various plastic parts, if the gap is too small when turning, there will always be abnormal noise, especially for new cars, and it will be good to run in for a while. If there is still an abnormal sound after the run-in, you can try to reinstall the steering wheel.

2. The friction between the steering column and the foot pad Sometimes the foot pad installed after the rear is too large, and it is in direct contact with the steering column, so the steering column will produce friction when it rotates.

3. Friends who have removed the steering wheel should pay more attention to the failure of the airbag hairspring in the steering wheel, which may be that the airbag hairspring is broken or the airbag hairspring plug is not plugged in properly, and the airbag hairspring or fixed plug can be replaced.

4. The steering tie rod ball joint is aging, and there is a space to replace the steering tie rod ball joint, but remember to do four-wheel alignment after replacement.

5. If the dust jacket of the steering machine leaks oil, replace the dust jacket or re-butter it.

6. If the steering machine is faulty, there is a "cluck" sound when hitting the direction, it may be that the gear gap between the steering machine and the gear is too large, and the steering machine can be replaced.

1. This situation generally appears in the model of mechanical hydraulic power steering, which is a very common way of steering power in the past, referred to as HPS in English, with mature and reliable technology and low cost. This type of steering power assist converts a part of the engine's power output into hydraulic pump pressure, which exerts auxiliary force on the steering system to steer the tires. When the steering wheel is not turned, the pressure in the chambers on both sides of the piston is the same and it is in equilibrium.

When the steering wheel rotates, the mechanical control valve connected to the steering column will be opened or closed accordingly, one side of the oil will no longer pass through the hydraulic cylinder and directly flow back to the oil storage tank, the other side of the oil continues to be injected into the hydraulic cylinder, the pressure difference between the two sides of the piston will be pushed under the action of the hydraulic force, and then produce auxiliary force, at this time we will feel that the steering wheel is not so laborious.

2. The steering pump drives the belt to slip. The steering pump is driven by a belt, and if the friction between the belt and the pulley is too small, the belt will slip on the pulley, and there will be a squeaky sound at this time. It may be caused by loose belt adjustment, excessive wear of the grooves of the pulley, or the new belt does not fit well with the old pulley.

A simple way to tell is to pour a little water on the belt when there is a noise, if the noise goes away, it means that the belt is slipping. At this time, first adjust the tension of the belt, if there is still a sound after adjustment, you can use it for a period of time to make the belt and the pulley fully match and then see if it is still ringing, if it is still ringing, you have to replace the pulley.

What to do if the steering wheel of the car is abnormal.

1. The sound of rebounding the clip after the turn signal.

2. The sound of the dust jacket of the direction column.

Whether you are in place or driving as long as you hit the steering wheel, you will hear the sound coming from under the steering wheel, you should check the steering post dust jacket, once the steering post dust jacket lacks lubrication, it will produce a dry friction sound, you just need to apply some butter in the dust jacket This sound will disappear.