How much is the spacing between gypsum board wooden keels when gypsum ceiling

The standard spacing of the wooden keel in the gypsum board ceiling is 30 cm. The spacing of the hanging bars is 60 to 80 cm, and the hanging bars are forbidden to be directly fixed to the top with wooden wedges, and then brush the fireproof coating, and the brush is tight and solid, until the true color of the wooden keel can not be seen. A gap of 5-8 mm needs to be reserved between the gypsum board and the board, and the gypsum board surface is inverted by 1-2 mm with self-tapping screws and anti-embroidery treatment, so as to be smooth and firm, and the special-shaped lines should be smooth.

Hello: Detailed process 1, use the horizontal tube to find the horizontal point, and use the ink fountain.

Bounce the horizontal line along the horizontal point;

2. Light steel keel.

The wooden keel is used as a side dragon, the position of the light trough is made of wooden keel or woodworking board, and the wood production place must be brushed with fireproof coating, the keel is at least 50 or more, the spacing is 30 cm, and the spacing of the hanging bars is 60-80 cm, gypsum board.

A gap of 5-8 mm should be artificially reserved between the board and the gypsum board surface of the self-tapping screws.

Inverted 1-2 mm and anti-embroidery, it should be flat and firm, and the special-shaped lines should be smooth;

3. Wooden keel: keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging bar spacing 60-80 cm is appropriate, hanging bars are strictly forbidden to directly use wooden wedge-shaped nails to the top, brush strict fireproof coating until the color of the wooden keel can not be seen, the keel is covered with a layer of full-foot willow eucalyptus core nine centimeter board and then on the gypsum board, between the gypsum board and the board to artificially reserve 5-8 mm gap, gypsum board surface self-tapping screws inverted 1-2 mm and do anti-embroidery treatment, to be smooth and firm, special-shaped lines to be smooth;

4. an aluminum gusset.

Strict requirements for the level, light steel keel bayonet teeth to align, keel spacing within 50, hanging bar spacing 60-80 cm is appropriate, on the board to be light, so as not to press the board surface out of the pit, the edge strip and the tile contact is not tight to use sealant to play tight;

5. Aluminum-plastic panels.

The wooden keel is at least 3 * 4 or more, the spacing of 30 cm is appropriate, the spacing of the hanging ribs is 60-80 cm, the brush is strict fireproof coating, the keel is covered with a layer of full-foot willow eucalyptus core nine centi board, and then paste the aluminum-plastic board with universal glue, between the aluminum-plastic board and the plate to artificially reserve a 3-4 mm gap, has been prepared to fill other colors to play the effect of dividing the grid, to be smooth and firm, the special-shaped line should be smooth, and the corners of the folding surface should be smooth and unbreakable Wood keel ceilings are commonly used in home decoration, and the general process is like this:

1. Read the drawings and fully understand the drawing modeling.

2. Plane the wood and brush it with fireproof coating.

3. Pop up the horizontal line of the ceiling on the wall, and fix a few longitudinal keels on the top as needed.

4. To make the keel frame, it can be nailed on the ground first, and the special-shaped top should be made of blockboard.

Make a model. 5. Use the boom to fix the wooden keel, and pay attention to adjusting the horizontal and vertical.

6. Reserve the position of the lamp holder bottom plate or lamp trough.

7. Connect the wires by the electrician and leave the wire ends.

8. Fix the cut gypsum board with self-tapping nails.

The ceiling wooden keel spacing is 60cm, and it is not possible. The wooden keel ceiling should be 40 cm apart according to the regulations, but considering that the gypsum board is not up to standard, the keel spacing of 30 cm is the best, as for 60 cm, it will definitely not work, and the gypsum board will definitely be deformed in the later stage.

Wooden keel at least 3 4 or more, the spacing of 30 cm is appropriate, the spacing of the suspension bar is 60-80cm, brush strict fireproof coating, the keel is covered with a full layer of willow eucalyptus core nine centimeter board and then paste the aluminum-plastic board with universal glue, between the aluminum-plastic board and the board to artificially reserve 3-4mm gap, has been prepared to fill other colors to play the effect of the grid, to be smooth and firm, special-shaped to achieve smooth lines, the corners of the folding surface to be smooth and not broken.

Other keel provisions.

1. The spacing of light steel keel: wooden keel as a side dragon, the position of the light trough is made of wooden keel or woodworking board, and the wood production place must be brushed with fireproof coating, the keel is at least 50 or more, the spacing of 30cm is appropriate, the spacing of the hanging ribs is 60-80cm, the gypsum board and the board should be artificially reserved for 5-8 mm gap, and the gypsum board surface is inverted with self-tapping screws of 1-2mm and anti-embroidery treatment, so as to be smooth and firm, and the special-shaped lines should be smooth.

2. The spacing of the wooden keel: the keel is at least 3 4 or more, the spacing is 30cm, the spacing of the suspension bar is 60-80cm, the suspension bar is strictly forbidden to directly use the wooden wedge nail to the top, brush the strict fireproof coating until the color of the wooden keel is invisible, the keel is covered with a full layer of willow eucalyptus core nine centimeter board and then on the gypsum board, between the gypsum board and the board to artificially reserve 5-8mm gap, the gypsum board surface self-tapping screw invagination 1-2mm and do anti-embroidery treatment, to be smooth and firm, special-shaped to achieve smooth lines.

3. The spacing of the aluminum gusset: strictly require the level, the light steel keel bayonet teeth should be aligned, the keel spacing should be within 50, and the spacing of the suspension bars should be 60-80 cm.

The standard spacing between the wooden keels: the keel is at least 3*4 or more, the spacing is 30 cm, the spacing of the hanging ribs is 60-80 cm, and the hanging bars are strictly forbidden to use wooden wedge-shaped nails directly to the top, and the fireproof coating is brushed until the color of the wooden keel is not visible.

The keel is covered with a layer of full-scale willow eucalyptus core nine-centimeter board, and then on the gypsum board, between the gypsum board and the board to artificially reserve a gap of 5-8 mm, the gypsum board surface self-tapping screws are inverted 1-2 mm and do anti-embroidery treatment, to be smooth and firm, and the special-shaped lines should be smooth.

When decorating the ceiling in the interior, some people will choose gypsum board, but there is still the main keel on the ceiling, but what is the distance between the gypsum board ceiling and the main keel? If the distance is too close or too far, the chant will have an impact on the effect of the decoration, so the distance must be appropriate, but why choose this distance? I hope the content is helpful to everyone.

1. What is the distance between the Shiye finger wheel plaster board ceiling and the main keel? Why should we choose this distance?

The spacing of the main keel is based on the suspension bar, and the conventional spacing of the suspension bar is 1 meter, but the actual specification is between, and the spacing of the auxiliary keel has .The spacing of the specification requires that the secondary keel be bidirectional.

The ceiling consists of the main keel and the auxiliary keel fixed perpendicular to each other. The main keel plays the role of foundation support, so the size of the material is large, the spacing is generally large, and the number is relatively small. The auxiliary keel is based on the main keel, which plays the role of supporting the ceiling surface material, and the size of the material is smaller, the spacing is smaller, and the number will be more.

The arrangement of the main keel parallel to the long direction is conducive to the overall leveling of the foundation support surface, and is also conducive to saving the main material. If the main keel is arranged parallel to the short direction, it will be more difficult to level the many main keels with each other, and the anastomosis between the secondary keel and the main keel will also be more difficult.

Second, light steel keel gypsum board ceiling**.

The light steel keel gypsum board ceiling is divided into three grades: low, medium and high

1. Low-grade price.

Low-grade light steel keel gypsum board per square meter is generally about 50 yuan. This is a material recommendation for simple decoration, and most families do not use it. According to the survey, because the cost of light steel keel contains many kinds, such as non-standard, international and other types, and there are differences in the quality of gypsum board, plus the cost of some accessories and other materials, so its minimum ** is also about 50 yuan.

2. Mid-range price.

If the home is used in the way of fine decoration, then this link of ceiling decoration needs to be paid attention to, and mid-range decoration materials can be used. In fact, it is very suitable to use international standard light steel keel ceiling plates, because these materials are not only functional, but also of very good quality. In addition to creating a healthy home environment, it can also play a role in heat insulation, moisture prevention, fire prevention and other functions.

According to the survey, the total cost of this kind of equipment and labor cost per square meter is generally about 80 yuan.

3. High-end price.

If you choose luxury decoration, the materials used must be the best, in general, the more complex the ceiling, the higher the ceiling, and the high-end price of the light steel keel gypsum board ceiling per square meter is generally between 120 yuan and 250 yuan.

What is the distance between the plasterboard ceiling and the main keel? When decorating the ceiling, the professional master is able to know the corresponding distance, why choose this distance? These distances are carefully calculated to know the most ideal location, and this distance is also the safest, suitable for ceiling decoration and transformation.

Under normal circumstances, the spacing of the main keel is 1200mm, and the spacing of the auxiliary keel is 40cm.

National Construction Code for Residential Decoration and Decoration Engineering:

gb 50327-2001)

The installation of light steel keel shall comply with the following provisions: String 7

The keel should be fixed along the ground, along the top keel and the frame keel according to the position of the elastic line, and the edge line of the keel should coincide with the elastic line. The end of the keel should be installed firmly, and the distance between the fixing point of the keel and the substrate should not be greater than 1m.

The installation of the vertical keel should be vertical, and the keel spacing should meet the design requirements. For damp rooms and steel mesh plastering walls, the keel spacing should not be greater than 400mm.

When installing the support keel, the support card should be installed in the opening direction of the vertical keel, and the card distance should be 400 600mm, and the distance from both ends of the keel should be 20 25mm. String 6

When installing the through-series keel, one partition wall below 3m is installed, and two partition walls are installed at 3 5m.

When the transverse seam of the veneer is not along the ground and along the spine of the top dragon, it should be fixed with a cross brace keel.

The installation of additional keels at doors, windows or special contacts should meet the design requirements.

The standard spacing of the vertical keel is 400mm? There is no way to talk about it

It mainly depends on the thickness of the surface layer gypsum board, the thickness of the gypsum board commonly used on the market (Knauf, Jack, etc.) is around, it is obvious that the spacing of the vertical keel plays a decisive role in the strong number of benches of the gypsum board lattice wall, when He traveled, 400mm did not exceed the limit of the national standard.

The specification requirements for the spacing of the double plasterboard ceiling keel depend on the size and weight of the gyppool board installed. Generally speaking, the keel spacing of double-layer gypsun ceilings should be between 30-60 cm, and the specific size should be determined according to different gypsum board thickness, board type and installation method. In addition, if the ceiling needs to be equipped with lamps or other equipment, it is also necessary to consider the influence on the keel spacing.

On the premise of ensuring safety and stability, reducing the spacing of the keel as much as possible can improve the overall load-bearing capacity and wind resistance.

Summary. The spacing of the main keel is generally between 80 120 cm, depending on how thick the gypsum board is used, if the gypsum board is thick, or it is a double-layer gypsum board, the spacing of the main keel should be small, otherwise it can be appropriately enlarged, but can not exceed meters; The spacing of the suspension bar is also the same, and the distance between the suspension bar and the suspension bar can be determined according to the size of the main keel, but it can not exceed 1 again.

2 meters; The spacing of the secondary keel (50 keels) is 30 cm when gypsum board is generally used, and if the thickness of the gypsum board is 12mm, the spacing of the secondary keel can be enlarged to 40 cm.

Gypsum board ceiling node large sample does not need to mark the keel spacing specifications.

The spacing of the main keel is generally between 80 120 cm, depending on how thick the gypsum board is used, if the gypsum board is thick, or it is a double-layer gypsum board, the spacing of the main keel should be small, otherwise it can be appropriately enlarged, but can not exceed meters; The spacing of Qingshan suspension ribs is also the same, and the distance between the suspension ribs can be determined according to the great reputation of the main keel, but the chain of the same hole can not exceed 1. 2 meters; The spacing of the secondary keel (50 keels) is 30 cm when gypsum board is generally used, and if the thickness of the gypsum board is 12mm, the spacing of the secondary keel can be enlarged to 40 cm.

What I asked was whether the design drawings reflected the keel specifications.

32A is the model, 60*60 is the keel size, and the length and width are 6 cm.

Do you want to draw it on the blueprint?

In the main house decoration of the main plaster casting, the necessary decoration is required, and the gypsum board suspended ceiling spacing plaster roof can make the house warmer and improve the overall decorative style of the house. 。Today we are going to introduce the window technology of drywall, consider the top of drywall, etc.

Aircraft roof construction technology? What are the considerations for the top of the aircraft board?

1. Front view of the façade, centered on the roof height. Once this step is completed, the plasterboard ceiling spacing will be pre-installed with a sueline keel on the sidewall.

2.Look at the top of the main keyboard and get the job done before the home page begins. Gypsum board ceiling spacing uses bolts to secure the roof structure.

3.The distance between the main copper home should be 900-1200 mm, and the distance between the gypsum board ceiling spacing wells should be less than 1200 mm. The links between the two main pages of the page include the hangar and the dragon boots.

4.After installing the home, go to the high and middle ridges, and the amount of spacing should be between 500 and 600 mm.

5.The paint is treated with an anti-rust treatment that applies pressure to the ceiling, cast iron parts and the front of the rotating panel to prevent moisture from rusting.

6.Enter the plaster table and pull out by hand to save the plasterboard and light steel frame. Please enter it.

1.It is good to use stainless steel dome nails to fix the plaster table. The grain will not be sheared, and the table can guarantee a long-term plaster.

These holes are usually treated with thorns.

3.The space between the two stuccos must be treated correctly. If you don't, you'll see obvious errors in the future. Ordinary workers use 901 paste and gypsum powder to mix and fill them.

4.After filling the gap with gypsum powder, it is applied to the surface with tape that can be broken to prevent cracking caused by thermal expansion and crushing. When installing, use a scraper to carefully remove the bubbles and make sure that the tape is in close contact with the drywall.

For a roof with a unique shape, it is important to deal with it later. The round shape or turf should be slowly fixed by an experienced master with a small shovel. It is also an important process for overall waste disposal.

Plastic plaster roofs have become more and more common in our lives, especially in recent years.

You can get it for free