The practice of gypsum modeling roof, how to decorate gypsum board ceiling

Many people are familiar with gypsum board, it is also one of the most common materials in our ceiling, it is also relatively cheap in terms of **, and the shape made is also very beautiful, favored by many owners, then next, we will introduce it to all of youLoading letters and sending to repair gypsum board ceilings1. How to decorate gypsum board ceilings?

1. How to decorate the gypsum board ceiling - make preparations before installation, check the net height of the house and the ceiling equipment, and pop up the elevation line on the wall, and pop up the control line of the layout point of the boom at the bottom of the floor slab.

2. How to decorate the gypsum board ceiling - drill holes in the position of the boom, connect the boom with the structure with expansion bolts, and then connect the main keel with the suspension bar with the hanging piece, and then complete the installation and fixation of the side keel, the secondary keel and the cross brace keel in turn, but during the installation should be adjusted in accordance with the construction specifications, and the ceiling arch is 1 200 of the short span.

3. How to decorate the gypsum board ceiling - to choose the appropriate gypsum board, and then use self-tapping screws to fix the gypsum board on the secondary keel and the cross brace keel, but to control the nail distance when operating, the nail head is embedded in the gypsum board is appropriate, and the top hat should be coated with anti-rust paint and smoothed with putty.

4. How to decorate the gypsum board ceiling - after the gypsum board is installed, the board should be filled with caulking putty, then select the appropriate seam paper tape, and paste the seam paper tape on the joint with adhesive.

5. How to decorate the gypsum board ceiling - apply putty on the gypsum board, pay attention to the joints and ends of the putty when applying, after each layer of putty is dry, polish it with sandpaper, scrape it 1 time and polish it 3 times.

6. How to decorate the gypsum board ceiling - after the putty is applied, use a roller brush or spraying machine to apply decorative paint. However, when using the spraying machine, it is necessary to control the spraying pressure, spraying distance and sequence.

Second, gypsum board ceiling installation needs precautions.

1. Precautions are required for the installation of gypsum board ceilings: the installed keel cannot be stepped on, and other pendants or heavy objects cannot be hung on the light steel keel.

2. Gypsum board ceiling installation needs precautions: during the construction of the ceiling, it is necessary to pay attention to the protection of the installed line pipe, and the boom and keel of the light steel keel cannot be installed in the ventilation pipe and other equipment.

3. Precautions are required for the installation of gypsum board ceilings: the installed ceiling is strictly forbidden to collide and pollute.

The above content is an introduction to how to do gypsum board ceilings and the precautions required for gypsum board ceiling installation.

Molded plaster ceilings, vaulted ceilings are among the largest because they create a gorgeous space. However, if the ceiling is not high enough, it can be frustrating when using this ceiling. In addition, the shape of the vault is hollow on the best side and monotonously decorated.

1.Modeling plaster ceilings have square ceilings, square compared to vaulted ceilings are more common, large, medium and small units are suitable for the shape of the rectangle, but the ceiling is best created in the space of significance, because it is very easy to visually match with reflective glass and crystal chandeliers. Make up for the sense of space and create a comfortable, warm and stylish atmosphere.

2.Square ceiling lamp, living room and must not be overly simple to decorate, because it is a place where everyone can meet and should have their own characteristics, and in addition to bringing different exotic styles, the beautiful square ceiling lamp total space takes the style and taste of the owner of Cave Mountain, one has two things falling into the raid.

3.Oval ceilings, in addition to more than three types of ceilings with suspended ceilings, are oval, but you can create a minimalist atmosphere for the entire space, because a lot of floor space and ceiling height are required of this type. However, it is best to use it with a crystal lamp with a lampshade.

1.Gypsum products should not be stored outdoors because they are afraid of water, waterproof, and moisture-proof measures should be taken. When decorating drywall, it must be handled gently (kept in a container) and kept clean.

If the drywall is dirty, white or other necessary shades or paints should be used after installation.

2.The model, size, squareness, thickness and surface flatness of the modeling plaster ceiling must be thoroughly checked before installation, and if not, it must be combed and replaced. In order to prevent the structural displacement of the gypsum board, there must be a certain distance between the plates and the plates during installation.

3.Decorative modeling gypsum ceiling, it is believed that this is also a large deformation of the problem, the main reason is that the space moisture does not disperse, and the ventilation problem has not been solved. Therefore, the decorative plaster ceiling should be placed in a ventilated and dry place to prevent deformation due to moisture.

You can get it for free

1. Bullet ceiling horizontal line: according to the design elevation, along the wall around the ceiling, the elevation level line, and along the elevation line of the roof, draw the keel binning position line on the wall.

2. Install the main keel boom: after playing the ceiling elevation level line and the dragon position line, determine the elevation of the lower end of the boom and install the boom. Straight installation is fixed to the structural ceiling with expansion bolts. The specifications of the boom meet the design requirements, and the spacing is less than 1200mm.

3. Install the main keel: the main dragon spacing is 900 1200mm. The main keel is connected with the boom with the matching dragon hanger.

4. Install the secondary keel: the secondary keel spacing is 500mm 600mm, and the secondary pendant is connected with the main keel.

5. Brush anti-rust paint: The ceiling boom and fixed boom iron parts of the light steel skeleton cover panel should be brushed with anti-rust paint before the cover panel.

6. Installation of gypsum board: The way of fixing gypsum board and light steel skeleton adopts the self-tapping screw fixing method, and the installation is thick and reverse under the light steel skeleton that has been installed and experienced (that is, to do concealed acceptance work).

The installation of the gypscale board is fixed with self-tapping screws, and the fixed spacing is 200mm on the edge of the board and 300mm in the board. After the self-tapping screws are fixed, the anti-rust paint is brushed.

7. Seam treatment: Paste paper tape caulking paste is used between the seams of the board for caulking treatment.

Gypsum board flat roof is a common interior decoration method, which has the advantages of simple construction, low cost, environmental protection and health. Below we will introduce you to the construction steps of gypsum board flat top and **.

1. Preparations.

1.Measurement: Start by measuring the room to determine the size and shape of the flat roof.

2.Material preparation: Purchase a sufficient amount of materials such as gypsum board, wooden rafters, keel, ceiling keel, hanging wire, etc.

3.Tool preparation: such as electric drills, chainsaws, hand saws, carpentry hammers, rulers, cutting knives and other tools.

Second, the installation of wooden rafters and keels.

1.Installing the rafters: Fix the rafters along the corners of the walls around the room so that they are horizontal and parallel to each other.

2.Install the keel: According to the size and shape of the flat top, the keel is installed parallel to the wooden rafters in the direction of the wooden rafters, ensuring that the distance between each keel is equal.

3. Install gypsum board.

1.Cutting drywall: Depending on the actual situation of the room, use a cutter to cut the drywall to a suitable size.

2.Install the drywall: Place the drywall on the keel and use an electric drill and screws to fix it on the keel to keep it level.

3.Opening: Use a chainsaw or hand saw to make the required holes in the drywall as needed, such as lamp holes, socket holes, etc.

Fourth, install the ceiling keel and hanging wire.

1.Install the ceiling keel: According to the design requirements of the flat roof, install the ceiling keel to ensure its level.

2.Installation of hanging wires: Use hanging wires to connect the ceiling keel with the flat top of the gypsum board to ensure its stability.

5. Grinding and coating treatment.

1.Grinding: Use a grinder to polish the flat top of the gypsum board to ensure that its surface is smooth.

2.Paint treatment: The flat top of gypsum board can be coated according to the needs to make the lack of seepage more beautiful.

The above is the construction steps and ** of the flat top of the pure gypsum board, I hope it can help you. During the construction process, it is necessary to pay attention to safety and comply with the operating specifications.

When people design the living room, they will design the gypsum board ceiling in the living room or other parts, and people still don't know how to design the shape of the ceiling gypsum board, so in the endCeiling gypsum board modeling1. The design of the ceiling of the living room is designed according to different roof spaces. Because the latter has different factors, you need to pay attention to the choice of materials and the design of the ceiling how the tomato is shaped.

2. Because the home is different, usually about meters, compared with the previous home is relatively low, so when people choose the material gypsum board ceiling, you should also consider the roof design. The height of the room is visually wider. We can design different patterns through drywall and decorate them around the ceiling.

Ceiling gypsum board modelingThe design style of the roof living considers the material of the floor to the living room at the same time, the ceiling must be part of the roof, the plasterboard and decorative part of the roof pattern will be wide and bright view. The general effect will rise to a certain level. To the living room is relatively high, the roof design grip can be achieved by using a certain effect of the space, you can choose the fiberglass ceiling absorbent roof wall panels, so that there is no feeling of openness.

4. InCeiling gypsum board modelingIn the design, the shape of the ceiling of the room not only plays a decorative role in the whole living room, but also has a certain influence on the design of the house. Traditional culture believes that the roof is a symbol of heaven, and a well-designed living room ceiling can make the family happy and healthy.

5. Some people think that the ceiling may have a stuffy feeling after installing the ceiling, so it is to expand the visual space with a mirror surface to alleviate the depression by the low ceiling. From the point of view of traditional cultural theory, the design of mirrors on the roof can have a detrimental effect. Because the scene embodied in the mirror will be consistent with the ground, for a long time, it will be illuminated by the mirror.

There will be some feng shui that will be affected, and the person's physical health will also be affected.

6. It can choose a flat top surface refers to the surface without any shape and level, the superstructure is flat, concise, generous, and the material is more than other forms of roof, suitable for decorating various ceilings living room. It is often used to splice various decorative panels and painted surfaces, paints, wallpapers, wall coverings, etc.

Here's the introductionCeiling gypsum board modelingYou can get it for free

Light steel keel gypsum board ceiling.

1. Process specification.

1) Check the installation of the concealed project of the roof, such as air conditioning system, fire sprinkler, smoke detector system, power supply and distribution system, background ** and other line pipes are installed in place and have been concealed and accepted.

2) According to the design requirements of the drawings, the surrounding leveling, the middle of the shelving is arched according to the convention.

3) The boom can be connected with embedded parts or reserved hooks when pouring plates, or expansion screws can be used to fix the connection after drilling upstairs.

4) The spacing of the boom keel is reasonably distributed according to the information provided by the manufacturer, and the keel connection should be leveled through the line after being fixed.

5) If all metal parts have no electroplating, they must be brushed with anti-rust oil twice.

6) Plane the edges of the gypsum board into chamfers, then compound with the keel with self-tapping screws and tighten them.

7) Gypsum board butt seam 2-3mm, and chamfer, cover with caulking putty, bury the seam tape into the putty, and fill the gypsum board chamfer with putty, and then level the board seam with a large board.

2. Technical standards.

1) Ceiling shelving such as 7-10m span, generally according to 3 1000 arch.

2) The boom spacing of the main keel is 900-1200, and the spacing of the main keel is about 600-900mm (or according to the manufacturer's information).

3) The edge of the gypsum board in the New Territories must have a chamfer of more than 20*3, and the construction shall be carried out according to the board seam application process to ensure that there are no cracks in the joints.

4) Different layers of gypsum board, apply different self-tapping screws, M4*25 for single-layer gypsum board, M5*35 for double-layer gypsum board, the screw spacing should be greater than 150mm.

5) The welding of the expansion screw embedded in the floor slab and the boom must be firmly expanded screw, and the common specification of the expansion screw is m8*60 or m8*80.

6) The connection between the boom and the main keel must be firm and reliable, without loosening.

3. Material description.

1) The light steel keel adopts the corresponding types of light steel keels approved by the designer, and the main keel should be able to withstand 800N maintenance load.

2) Gypsum board is a thick paper gypsum board that meets the design requirements.

3) The boom is made of 10mm round steel.

4) The fixed screw ceiling part is made of high-quality expansion screws of more than 10mm, and the hanging plate part is made of carbon steel self-tapping screws with a length of 5cm.

5) Putty and seam tape require the use of putty and seam tape provided by the original gypsum board factory, otherwise, it must be signed after the design of the model and technical indicators can be used for other materials.

There is no need for blockboard to make a base, the flatness of double-layer gypsum board is good, and a layer of 9mm can also be used.

Beauty, suspended ceiling, depending on what materials are used, parts, the general project is made of light steel dragon horn gypsum board. Woodworking board is used in the window box, other places can not be used, and then there is a line to use, woodworking board base, plasterboard,