What does it mean to be a gang?

Guangxi's talk for a while refers to a group, that is, the meaning of going together, and this is just a dialect here.

This is what we call a group of people. That is, one together. Or it can be said that one team and one unit can be.

Guangxi's prosperity is a bit of a stretch, and what he means is to get up and run away quickly, which is equivalent to a kind of blackening, hurry up and run.

Discharge cooling is another type of convection cooling. Unlike regenerative cooling, the coolant used for exhaust cooling absorbs heat to the thrust chamber and is discharged out of the combustion chamber instead of entering the combustion chamber to participate in combustion. Direct drain coolant reduces the thrust chamber specific impulse, so the coolant flow for drain cooling needs to be minimized while only using drain cooling at the outlet section of the nozzle that is relatively less heated.

There is also radiative cooling, in which the heat flow is transferred from the combustion products to the thrust chamber, and then the heat is radiated by the thrust chamber wall to the surrounding space. Radiative cooling is characterized by simplicity and small structural mass. It is mainly used in the extension section of large nozzles and the thrust chamber of small thrust engines using high-temperature resistant materials.

When cooling in the thrust chamber of the tissue, a relatively low temperature liquid or gas protective layer is established on the surface of the thrust chamber wall to reduce the heat flow to the thrust chamber wall, reduce the wall temperature, and achieve cooling. Internal cooling is mainly divided into three methods: internal cooling (shield cooling), membrane cooling and diaphoretic cooling of head tissues. After the internal cooling measures are adopted in the thrust chamber, the mixing ratio near the wall of the combustion chamber is different from the optimal mixing ratio in the central area (in most cases, the near-wall layer rich in fuel is used) due to the need to reduce the temperature of the protective layer, resulting in the uneven distribution of the mixing ratio along the cross-section of the combustion chamber, so that the combustion efficiency is reduced to a certain extent.

Membrane cooling is similar to shield cooling in that it cools the thrust chamber wall by establishing a uniform and stable coolant film or air film protective layer near the inner wall surface, except that the coolant used to establish the protective layer is not injected by the injector, but is supplied through a special cooling belt. The cooling band is generally arranged in a cross-section of the combustion chamber or the convergence section of the nozzle. There can be several cooling bands along the length of the combustion chamber.

In order to improve the stability of the membrane, the coolant often flows through the gaps or small holes in the cooling belts, and when sweating is used, the thrust chamber wall or part of the inner wall is made of porous material with a pore diameter of tens of microns. Porous materials are usually sintered with metal powders or pressed with metal mesh. In this case, the number of pores per unit area is increased by making the micropores in the material as evenly distributed as possible.

The liquid coolant penetrates into the inner wall, creating a protective film that reduces the density of the heat transferred to the wall. When the flow rate of liquid coolant used for sweat cooling is above a certain threshold, a liquid film is formed near the wall of the thrust chamber. When the coolant flow rate is below the critical flow, the inner wall temperature will be higher than the coolant boiling point at the current pressure, and some or all of the coolant will evaporate, forming an air film.

In addition to the above thermal protection, there are other thermal protection methods such as: ablation cooling, thermal insulation cooling, hot melt cooling and composite protection of chamber walls. 3. Thermal protection scheme of high enthalpy gas generator Based on the above methods and the actual situation, the thermal protection method of high enthalpy gas generator is obtained.

The combustion chamber of a high-enthalpy gas generator differs from that of a liquid rocket engine, eliminating the front thrust chamber part, making its structure simpler and more effective. Then, the thermal protection involved is the thermal protection part of the combustion chamber wall. As the fuel enters the combustion chamber, it quickly decomposes and releases large quantities.

, it's the same as bragging. The verb is. Pull, tear.

(1) (Shape and sound. From the hand, extravagant. Pull is a colloquial word for "pull".

Original meaning: tear) (2) pull, traction. Such as:

pulling a car (pulling a car); Pull (pull; involvement); Pulling (pulling, pulling); Pull Pull Pull (Pull Pull Pull.) Pull by hand); Pulling the fiber (the act of using improper means to match or intercede for others to make profits).

3) Tear . Such as: tearing (shredding; pull-off); tear the letter to shreds; Tear off the mask; Rip (tear).

4) Buy Zero. Such as: tearing two feet of cloth.

5) Pull up. Such as: hair pulling; Pull the seedlings.

6) Conversation, mostly refers to rambling conversation. Such as: idleness; Nonsense; Pulling and pulling; The ram goes on and on; ().

Pull: (1) (Explained according to the given glyph.) Shape sound.

The word is from the hand, from the stop, from the sound. "止" means "to stop". "Hand" for "pull" province.

"Hand" is combined with "stop" to mean "to hold someone and stop him". Original meaning: to pull someone so that he can't leave.

By extension: tearing).

2) Pull, pull [pull]. Such as: pulling the car (pulling the car); Pull (pull; involvement); Pulling (pulling, pulling); Pull Pull Pull (Pull Pull Pull.) Pull by hand); Pulling the fiber (the act of using improper means to match or intercede for others to make profits).

3) tear. Such as: tearing (shredding; pull-off); tear the letter to shreds; Tear off the mask; Rip (tear).

4) Buy. Such as: tearing two feet of cloth.

5) Pull up. Such as: hair pulling; Pull the seedlings.

6) Conversation, mostly refers to rambling conversation [chat; gossip]。Such as: idleness; Nonsense; Pulling and pulling; The ram goes on and on; ().

7) Cute, mostly refers to the other party's language and demeanor. (often used between lovers).

8) In the colloquial language of Guanzhong area of Shaanxi, the word "pull" is interpreted as bad and failed, such as: This test is too!

9) In the Sichuan dialect, the word "pull" is interpreted as funny, unbelievable, and alternative.

1. Pull: Hold on; Involve others.

2. Tear: Tear the letter open.

3. Talk about it in any form or content: lie; Nonsense.

4. Unprincipled arguments, entanglements, and prevarications.

Pull pinyin chě, simplified radical 扌部, 4 strokes outside the department, 7 strokes in total strokes traditional radical hand, five strokes rhg, cangjie qylm, zheng code dii Chinese character strokes:

1. idle 扯 [xián chě].

Chat. 2. [chě dàn].

Cackle; Nonsense.

3. 扯皮 [chě pí].

arguing without principle; Quarrel.

4. 胡動 [hú chě].

Chat. Talk nonsense.

5. Blind pull [xiā chě].

Nonsense without a center; Unfounded nonsense.

1, pull 2, tear; Tore.

3. Rambling on small talk.

Detailed interpretation: Movement 1, (shape sound. From the hand, extravagant. Pull is a colloquial word for "撦". Original meaning: tear) (2) pull, traction.

Pulling, pulling, pulling.

3) Tear . Tear the letter to shreds, tear off the mask, tear it apart.

4) Buy Zero.

Tear two feet of cloth. 5) Pull up.

Pulling hair, pulling seedlings.

6) Conversation, mostly refers to rambling conversation.

Idle nonsense, family chatter, rambling, rambling,.

Explanation of terms: 1. Climbing.

pān chě] implicated pull: This matter has nothing to do with him, don't climb him.

2. Blame. chě sào] nonsense; Nonsense (cursed words).

3. Nonsense. hú chě] chat; Nonsense: The two of them talked nonsense. Nonsense, there is no such thing in the world!

4.. chě dàn] idle pull; Nonsense.

5. Pulling gas. chě qì] dialect. Angry.

Pull], this song was originally named "Pulling", but Zhou was afraid that others would misunderstand it, so it was associated with Jolin Tsai's English word jolin, so it was finally renamed "Pull" and removed the bell word. Also, Taiwan's bell is China's pipe bamboo. Pull with a rope and make a sound.

If you can get on the **, I'll pass one. Beijingers seem to have a lot of fun there. Pull the weather, it's cold, it makes people sulk, I'm depressed, I'm angry, the air is too bad, I need too much oxygen, I get angry when I think about it, knock on the door, knock on the door, don't turn off the lights when you leave, the habits of life are really mixed enough, knock on the door, knock on the door, simple actions, knock don't wait, although you don't look like a bad guy, but you are stupid in doing things, you are like a swamp of gas, affecting my morale, damaging my heroic spirit, and so spirited, speaking in a tone I don't want to spend my energy for you in vain, ruining the atmosphere Then I will tear off the bell If you talk too much, you will be addicted to pulling your most fickle expression My explanation, please be sure to listen to it, then it will pull the bell, but you can't pull out a fate, pull your most fickle expression, hey, you say this, I'm a little sad, keep pushing and procrastinating, keep making mistakes, raise a bunch of excuses, and when it matures, say it's a friend one second, and the next second, lie to me, don't talk to me again, I'm not a fool, I have to pay for lying, it's a deserved punishment, don't talk to me anymore, you are treated as a joke, and the embarrassment you caused yourself I can't knock knock on the door, knock on the door, and knock on the door without waiting for you to look like a bad guy, but you are stupid to do things, knock on the door, knock on the door Simple actions and knocks don't wait, although you don't look like a bad guy, but you are stupid in doing things, you are like a swamp of gas, affecting my morale, damaging my heroic spirit, and so spirited, speaking in a tone that corrupts the atmosphere I don't want to spend your energy for you in vain, then you will pull the bell If you talk more, you will be addicted to pulling your most fickle expression My explanation, please be sure to listen to it, then you will be able to pull the bell, but you can't pull a fate, pull your most fickle expression Hey, you say this, I'm a little sad, then I will pull the bell, and if you talk too much, you will be addicted to pulling your most fickle expression My explanation, please be sure to listen to it, so you can pull the bell, but you can't pull a fate, pull your most fickle expression, Hey, you say this, I'm a little sad, I didn't see that the lyrics are written with ringtones.

You can go and see the MVThere is also Jay's bell dance in it, and it is recommended to watch the MV of "The Longest Movie", which is very touching.

(1) Divorce because of a bowl of soup.

From falling in love to taking wedding photos, there are all kinds of problems. Later, a year after getting married, I was told that I was divorced. I said why?

I told me that when the table was cleaned up after eating, men always poured the soup into the sink and then the scum into the trash. Instead, the soup and water were poured into the trash. The woman said it again and again, and the man still did it.

And then they got divorced. In my opinion, this is just an excuse for the reason for this, or not enough love.

2) Divorce because of a bottle of Coke.

The husband said: You drank the last bottle of Coke in the fridge! You're sick! Now that I'm thirsty, what do I drink? Wife: Divorced.

One of the other party's farts may become a reason for divorce!

As long as you want to get a divorce, you can use whatever you want as a reason!

But what can be written in the divorce agreement is generally one sentence: the relationship between the husband and wife broke down due to emotional discord.

I think at the beginning of the relationship, he didn't mind anything, didn't mind your past, didn't mind your bad temper, and at that time you were so moved that you hugged him and cried. Who knows, time passed, and when he got married, he forgot what he said. When people can't get it, they don't mind anything, and after they get it, they mind a little bit about everything.

Everyone has more or less shortcomings, and then there are some people who take the road of dissolution of marriage because of these shortcomings. Most of the reasons for the dissolution of the marriage contract after the 90s are because of immaturity, whether in life or economy after marriage, they still rely on their parents, have no sense of responsibility for the family, and will not communicate and deal with problems rationally. The pace of development is fast, and the cycle of personal education and ideological maturity is also extended, so it is better not to get married too early, and wait until you are old enough to bear marriage, and then make a commitment to the person you love.

Because the wife likes to have pets, it eventually leads to the dissolution of the marriage. When getting along, the man didn't feel that the woman had any problems, and he also knew that the girl had a pet that he loved very much, but when he really lived together, he found that the other party raised him like a human being, and would go out for a walk with the pet on time every day, and would take the pet for regular checkups. The woman spends more time with her pet than with Nannan, and when two people want to be alone, there will be a pet next to her, constantly disturbing.

The man once expressed his dissatisfaction with the woman euphemistically, but the woman did not change, so that the relationship between the two people became worse and worse, and the man finally couldn't stand it and proposed to dissolve the marriage contract. In fact, there are a lot of women who like pets, but everything must have a degree, if it affects the marriage in real life because of pets, it is not worth it, and the way to deal with the problem in the south is not very correct, you should think of a way to get the best of both worlds, rather than worrying about a pet. The man mistakenly thought that the woman, and in order to take revenge on the woman, he really made a girlfriend outside, but later found out that the woman did not.

In this case, the man is in a dilemma. Originally, the woman also wanted to forgive the man and begged the other party to return to the family, but at this time, the man found out that the object was pregnant with a child, and he had no choice but to break the marriage contract with the woman. However, what is even more bloody is that when the man and the object get married, they find out that the other party is not pregnant with their own child, but just uses this method to force themselves.

In this case, it is impossible for the man to find his previous partner, so he can only live well with the object. When two people love each other, it is impossible not to change each other, and it is impossible not to change themselves. Two people together are very different from a person, because you need to care about each other, will gradually become stronger, some inseparable past, some unretained feelings, including the troubles in life, will eventually become light with the passage of time.

Emotions and emotions, you need to adapt to the other person's habits, you need to know how to let go of yourself and take care of the other person sometimes.