Is it good to match a window and door in the fa ade room?

Not good, the façade room will form a reflective brake against the outside window, which means that the reflective brake is not good for people's mental condition, making it difficult for people's spirit to concentrate. You can hang five emperor coins behind the gate.

To dissolve, the Five Emperors are rigid, and the power of copper to absorb the aura is better than that of gold and silver. And it circulates for a long time, and has the essence of "heaven, earth, and people", so it can calm the house, dispel evil, and have prosperity.

Function; If the requirements are not high, you can collect all the five copper coins and hang them behind the door, and if the requirements are high, you can also go directly to the Internet to find the strong and evil five emperor coins prepared by people who understand the principles of feng shui.

It is not good for the façade and the windows to face the door.

The façade room faces the doors and windows, forming the so-called "reflective brake". Reflective evil is one of the five major evils, which mainly damages the population, recruits right and wrong, and commits villains, which is not good for people's mental condition and will make it difficult for people's spirits to concentrate.

For the Five Yellow Evils, the average Feng Shui master will use the Five Emperors Money to resolve them. The five emperors are strong, and the power of copper to absorb the aura is better than that of gold and silver, which can calm the house, dispel evil, and have the function of prosperity.

Hello, 1.The door is facing the door and window balcony Piercing the heart, that is, the door is facing the back door, the back window, and the balcony into a straight line, and the air inlet and the air outlet of the house are opposite to each other. Piercing the heart hall will also cause the rapid flow of aura in the house to be extremely unstable, and it is easy to have the unexpected effect of blood light and high finches.

2.If the window is facing the door, it means good luck from the door, and it will be sent away by the window in an instant. In this case, even if there are thousands of good fortunes.

3.Door to window Feng Shui taboo First of all, the door in our home is facing the window, that is, when the door is in line with the window.

As one of the most important links in the process of house decoration, doors and windows not only affect the overall visual effect, but also meet our requirements for room comfort, warmth and safety. Doors and windows integrate a variety of materials such as profiles, hardware, glass and auxiliary materials, and many factors need to be considered in the design, such as aesthetics, structural mechanics and conduction control of light and heat energy, noise control, wind pressure resistance, air tightness, water tightness, ease of use, durability and weather resistance.

There are many factors that need to be considered for products, and the degree of standardization of the market is very poor, so we will face many misunderstandings and traps when choosing doors and windows.

Choose doors and windows The first choice is "broken bridge aluminum".

When you buy aluminum alloy doors and windows, merchants may recommend broken bridge aluminum. Because aluminum alloy is a good conductor of heat, the heat insulation is too poor, which affects comfort and environmental protection. Before the broken bridge technology came out, aluminum alloy basically withdrew from the selection of doors and windows due to its thermal insulation problems, and the emergence of broken bridge technology saved aluminum alloy doors and windows.

Therefore, in the decoration process, unless the silver is too tight, it is generally recommended to use broken bridge aluminum doors and windows, in addition to their own comfort, energy saving and reducing energy consumption are also very important.

The selection of broken bridge aluminum also depends on the "system".

The method of judging the quality of a system is mainly to look at the section of the profile eect angle. Often, the tightness of a broken bridge section and the sealing strip is a reflection of the quality of a system. Here are a few things that will help you easily:

1) There are three rubber strip seals between the system doors and windows, the opening sash and the door frame.

2) The installation of the door and window glass of the system will never be silicone, and the two rubber strips inside and outside the glass are used.

3) The glass pressing line of the system doors and windows cannot appear outdoors. As shown in the figure below:

How to choose the opening method of residential doors and windows is also very important! Common window opening methods are: push-pull, outward, inward-open, inward-opening, uphanging, etc.

Sliding windows were very popular before, cheap, do not take up space, and are easy to use. However, the main problem of sliding windows is that the sealing is not good, it is easy to leak air and water, and the sound insulation performance is very poor. Outward windows are also a type of window that is used more, the main feature is that they do not occupy indoor space, but due to the potential safety hazards of outward windows, there is a risk of falling from high altitudes, and there are few outward windows used in foreign countries, and Chinese regulations also stipulate that buildings with more than 7 floors cannot use outward windows.

The details of the doors and windows should not be overlooked.

Look at the puzzle. As we all know, the final quality of doors and windows has a great relationship with the processing capacity of the processing plant, and one of the important indicators is the corner. The connection of the two profiles at the corners of the good doors and windows is connected with aluminum corner codes, and then the profiles and corner codes are squeezed together with a corner forming machine, and then two-component glue is injected into the holes to solidify the corner code frame together.

Commonly used low-quality practices are: no corner code splicing, no corner code curing glue, or this is a little bit of mouth to deceive consumers. In addition, the quality can also be judged by touching the seam of the group corner with your hand, and the smoother the result, the better the processing quality of the group corner.