The wall tiles in the bathroom are showing signs of falling off, what should I do?

Tell people to repair quickly, don't fall down and touch people is not good, it should be that the tiles were not installed at the beginning, or there is a problem with the cement, the wall was not done at the beginning, and now if a large piece is loose, you have to knock to see if the other place is hollow, if it is to re-knock off and reinstall the tiles? Find a master with a good process, don't look for an unprofessional plasterer, ask ** is not expensive, ask a few more to see if ** is about the same, choose your own suitable ** maintenance is, the tile to buy a good point, the good point of the adsorption is very strong, the quality is not easy to fall, to the regular wholesale market to buy ceramic tiles better.

If the tiles are still usable, clean them up and put them on, if not, replace them with new bricks. But no matter what, remember to do a brushing first, the bathroom has higher requirements for waterproofing, and if the waterproof layer is not brushed, the wall tiles will fall for a reason. It is recommended that you can try the classic blue brushed wall solid, which has strong sand fixing ability and high brushing strength, and the brushing effect is very good for the waterproof wall surface, and it is very environmentally friendly, which is simply designed for tiling.

My family has also encountered this problem, individual tiles are swollen to fall off, I take the initiative to remove it, don't break it, and then buy a tube of wall sealant, evenly wipe a layer behind the tiles, re-stick it on the wall, before the glue is dry, fix the tiles with tape for 24 hours, and repair them as before.

The wall tiles are going to fall, pay attention to safety, ask the decoration master to deal with it, or remove the wall tiles and put them safely before asking the master to come to repair.

The wall tiles fall off because the adsorption power of the cement is reduced, and they should be removed and re-pasted as soon as possible to avoid injury.

This may be that when decorating, it is not done well, the cement is less, and the workers who cut corners lose people, and if you do this, you may need to buy a glue with a good paste effect or a stronger remedy to solve it!

Re-buy a little glue to stick on.

A few days ago, a few tiles suddenly fell from the house, but fortunately they didn't hit anyone, which scared me to death! There is no problem with looking very stable during acceptance, but when the wall tiles are removed, it is simply caused by not shoveling the wall skin. I can't find the person in charge of the renovation, where can I reason?

Look at this large area of white wall skin, how can the tiles be firmly pasted, and they can't be used for a long time! Therefore, you must remember to shovel the wall skin when sticking wall tiles, otherwise you will not be able to find anyone to reason with you.

I looked for a decorator again, and they said that they wanted to reinstall, because the area was too large, but now it was inconvenient to reinstall, so they temporarily used expansion screws to do a simple fix.

Here are a few reasons why wall tiles are used for a short time and are easy to fall off:

1. The quality of wall tiles.

The water absorption rate of wall tiles is directly related to the adhesion force, but it is not that the higher the water absorption, the better, if the moisture is not enough, it will be inconsistent with the cement shrinkage, which will lead to the falling off of the tiles.

2. The grassroots work has not been done well.

Underlying questions are often the most common. When we decorate a new house, we will shovel the wall skin, but most of us simply shovel or paint the wall. However, no matter how much the wall is brushed, if the wall skin is not cleaned, it will greatly affect the friction and adhesion of the wall.

Also, the wall is not watered enough, and the tiles are not cleaned properly, which will leave hidden dangers.

3. The tile is not dry and receives bumps.

When the cement mortar has not been completely bonded to the wall and is dry, it is best not to let it be collided, which will cause gaps in the mortar, resulting in unstable paste, and it may fall off in the future.

4. Gaps between tiles.

Gaps need to be reserved between wall tiles, because the effect of thermal expansion and cold contraction will cause them to squeeze each other, resulting in fracture or falling off. The cement mortar behind the wall tiles should not be too thick, which will not only affect the overall effect of the space, but also the thermal expansion and contraction will be very unstable, which will accelerate the falling off of the tiles.

Users can use tile caulk.

Reasons for the falling off of the wall tiles in the bathroom:

1. The wall tiles have not been soaked in water and pasted directly.

2. The waterproofing agent of the wall cannot be adhered to the cement slurry.

3. The wall is not watered thoroughly before pasting the wall tiles, and the cement slurry ratio is too dry or too thin.

During the decoration warranty period (the decoration warranty period is generally two years), you can find the decoration company to reconstruct or pay compensation according to the decoration contract. If the expiration date has passed, you need to find someone to redecorate. For the situation that a large area of wall tiles falls off, it is necessary to ask a professional decoration worker to re-pave.

In this case, the cement mark is unlikely to be small, the main reason is that the time for the brick to soak in water is not enough when pasting, and there is no sprinkling on the pasted wall, and there is just after the glue is filled with caulk, you can ask your adult. The simple solution, go to the place where the tiles are sold, you just say stick a few bricks, and he will sell you 903 construction glue (about 10 yuan), and you can stick it on it yourself when you come back.

Oh, there may be traces of oil smoke when the base layer is treated, if the new house is a small cement mark, or the paving time and space is bulging.

Get a bricklayer bag for them to do, and they can buy you some cement and put it on for you.

After cleaning, use a glue to use a glue to use a five-point gluing method behind the tile.

There is a reason why there is not enough cement, just go to the side of the road and find some plasterers to deal with it.

You can remediate it in the following ways:

Clause. First, buy marble, glue will be about to fall off the brick directly find a way to remove it, on the back of the marble glue, because it is a quick-drying solid glue, generally used for stone, but can also be used for all kinds of tiles.

Clause. Second, you can also buy 502 glue, fix it first, and then squeeze the commonly used glass glue into the gap, and remove the 502 glue after the glass glue is dry, and the surface is not very firm.

Clause. 3. These two kinds of glue can be bought in general hardware and grocery stores, and if you don't know how to use marble glue, you can ask the boss. Similarly, you can also use AB glue to fix it, but the general exterior wall stone is made of marble glue, which is safe, firm, and recommended!

First of all, it is necessary to figure out the situation of the tile falling off the brick, if it is just a simple tile falling off, the sand and ash layer is still stuck to the wall, and the brick does not fall off, either the brick is not handled well, the brick is not completely soaked or there is no glue, the glue is not dried, or there is a problem with the construction technology; If the part of the wall tile that is waterproof falls off, and the part that is not waterproof does not fall off, it is likely to be a waterproof problem. Further judgment to remove a brick, if the mortar layer is stuck with the wall tiles, and the waterproof wall does not stick and fall off, it is a waterproof problem.

In the first case, you can re-brush a layer of waterproofing on the wall, and then choose the double bonding combination of tile adhesive and adhesive to ensure that the adhesion is sufficient, we often use the old stubborn concentrated tile adhesive and tile adhesive, the general specifications of the tile are enough, if you are a large brick on the wall, then you need a stronger tile adhesive, the old stubborn also has a special large brick tile adhesive, with their two-component adhesive is enough; If it is the second case, it is necessary to do a good job of waterproofing first, with the old stubborn brick waterproof slurry, you can directly waterproof and pull the two-in-one, the bonding strength is very high, it is specifically for the waterproofing of the brick wall, and then do the tiling, choose tile adhesive and adhesive. No matter what product is used, it must be constructed in accordance with the standard process, and some tile adhesives can not be cemented, so as not to damage the bonding performance.

First of all, break off the tiles that are about to fall so that they don't fall suddenly and hurt people. Then buy tiles of the same size and pattern and come back for restoration. If the drop area is relatively small (within 1 square meter), you can simply repair it yourself.

If the drop area is too large (more than 1 square meter), you can ask a professional to come to the door to renovate the bathroom wall.

Note: If the broken tiles are not broken, you do not need to buy new tiles, you can use the original blind reed tiles.

Repair methods for falling tiles in small areas:

1. Prepare a plastic basin, a bucket of 107 glue, a bag of cement, tiles as needed, a hammer, and a trowel.

2. Add cement, 107 glue and water in the plastic basin in a ratio of 1, and stir evenly into cement glue with a trowel. If you add 1 kg of cement, you need to add 1 kg of glue and water.

3. After stirring, use a trowel to evenly wipe the cement glue on the back of the tile, and then stick the tile on the wall.

4. Use a hammer to gently tap the tiles you just pasted, so that the tiles and the wall are more firmly adhered to, and the glue will dry naturally, and you can grind without it, generally 1-2 days.

The main reason for the loss may be because it is not glued well during the renovation, so you can buy some glue from the Internet, glue it yourself, or ask some professionals to deal with it.

At this time, you can remove the cement behind the brick wall, remix the cement after grinding, and re-paste the tiles, or you can directly buy tile glue, and paste it with glue after the back is treated, or you can directly remove all the wall tiles and re-pave.

I think in such a situation, we can find some cement by ourselves, and then lay the tiles on it, which is also more convenient, and can also solve some of our later troubles, and at the same time it looks more beautiful.

These wall tiles should be reinstalled, or all the wall tiles in the bathroom should be repaired, so as to ensure that there will be no other problems, and also to ensure the overall aesthetics.