What should I do if the floor is wet and bulging?

Then there is a bulge, under normal circumstances, it will not automatically return to its normal state immediately, because there is moisture in the middle, even after a summer, it may not return to a flat state, even if the moisture is dry, it will not return to the original flat state. Therefore, when using wood flooring, especially laminate flooring, we must do a good job of waterproofing, including when doing hygiene, the mop must not have water droplets. When we decorate a house, we always struggle with whether to choose a wooden or tile floor in the bedroom.

The floor treatment that causes a trace amount of tile shape should be immediately removed under the baseboard to cause convection to remove moisture, and the board surface will slowly return to the level as the moisture evaporates. Because they have their own advantages and disadvantages, such as wood flooring, we are always worried about whether the wood floor will rot, whether it can contact water, and so on.

When the composite floor is bulging, the bulging wood block and the surrounding floor can be removed, so that through a period of ventilation and ventilation, the bulging phenomenon can be reduced, if the area is very large to pry up the floor, you need to wait for the ground and keel to be good before installing it back, when installing the floor, it is necessary to reserve a small gap to give the floor a space for wet expansion and contraction. Marco Polo tile, is the main product of Guangdong Weimei ceramics, founded in 1988, is the earliest brand of building ceramics in China, but also in our country is a very well-known brand and so on.

Floor tiles cannot be said in a narrow sense which is good and which is not, because their positioning attributes (function, applicable environment) are different. Commonly used floor tile materials include polished tiles, glazed tiles, vitrified tiles, full-body tiles, microcrystalline stones, etc. Floor tiles are generally home decoration specifications of 800 * 800, the color should be determined according to personal preferences and overall style, I personally recommend Guangdong bricks, because the technology in Guangdong is more mature in all aspects, the brick firing clay and glaze are also good, the flatness is needless to say, the slip resistance and wear resistance are also good, good tiles must be impervious and so on.

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

Try to open the doors and windows as much as possible to let the floor moisture volatilize quickly, you can also remove the baseboard, pry up the floor with water, natural ventilation, or use a hair dryer to dry the water in the gaps of the floor, and then lay the floor, press heavy objects on the floor, so that the floor will slowly return to its original state.

At this time, the appropriate professional should be called to carry out the repair, and this situation also indicates that there is air underneath, so it is necessary to replace the floor so that it can be used normally.

First of all, we must ventilate, and we must clean the wet places, and we must warp the floor, do a good job of waterproofing in this place, and we must eliminate potential safety hazards.

In this case, you can only change the floor, because there is no way to restore the bulging floor to its original state, so you must pay attention to avoid getting wet next time.

The floor should be ventilated to keep it dry, and it will go down when it dries slowly, or you can pry up the floor and wipe the floor dry.

You can find a professional decorator to redecorate, or pry the floor up and re-glue it with other materials.

If the laminate flooring and solid wood flooring are soaked in water and warped, then the wooden floor will inevitably be bent and deformed. In this case, it is difficult to solve by removing surface moisture. The best way is to lift this part of the soaked floor and wipe off the moisture on the surface of the floor; This part of the floor is then stacked on top of each other in a tic-tac-toe shape to prevent the floor from deforming, and wait until it is dry before putting it back on.

For the slight problem of the local wooden floor soaked in water warped, or the soaked part is on the edge, you can use a dry rag or paper towel to stick to the splicing seam of the wooden floor to absorb water vapor, you can also use a vacuum cleaner or hair dryer, but be sure to use cold air, because hot air may cause the surface of the wooden floor to be heated and dry and cause deformation or even cracking.

Precautions for the maintenance of wooden floors.

Prolonged exposure to strong sunlight can cause discoloration and cracking of the floor, and attention should be paid to direct sunlight on the floor.

Solid wood flooring and parquet need to be waxed regularly, which can play a role in isolating dust, water and air, and play a role in anti-wear, anti-slip, anti-insect and brightening.

If the solid wood floor is not installed well, it may lead to warping in the future, so it is necessary to be careful when installing.

If the wooden keel is paved with nine splints, the gap between the nine splints and the wall should be left with a gap of about 10mm, and there should be a gap of 5 6mm between the nine splints and the nine splints, and the spacing between the wooden floor and the wall should also leave 10mm for expansion space, and the solid wood floor should be fixed with twist nails.

Answer: If the 2113 wooden floor is soaked in water, the surface water on the wooden floor should be sucked dry in the shortest time of 5261. At the same time, take a vacuum 4102 device to absorb water vapor in the splicing gap of the 1653 board of the soaked wood ground, or take a hair dryer to dry it with cold air, but do not use hot air to blow it to prevent the surface from drying and cracking due to heating and drying. It is not recommended to plane the arched part and then repaint the treatment method, because after the arching part is planed, repainting will lead to inconsistency with other board colors, and the thickness of the whole board is uneven, the force is different, and it is easy to appear pits.

If it is a large area of soaking water, you should notify the after-sales service office of the wooden floor in time, and try to keep the wooden floor not deformed under the condition of carefully priing the wooden floor, according to the "well" shape superimposed in the ventilation place to dry, with the weight generated by its stacking to prevent the occurrence of deformation, pay attention not to be exposed to the sun, in general, for the quality of the solid wood floor can be used again. If it is a small area of soaking water, it is recommended not to pry the floor up to dry, as it is easy to cause hard damage to the floor, which is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor to expose the expansion joints, which usually take about three to ten days to dry out, depending on the amount of seepage.

Three ways 1: Buy a quick glue called 502 on the market, drip it into the gap and see if it can be glued.

2. Find the manufacturer you bought the floor to deal with.

3. Solve it by yourself, take off the warped floor, replace one or several floors, if you don't want to re-install them all, then only pick up a few pieces, and use a saw to see off the groove tenon when it is installed to the last piece, and then glue it to the ground.

Hello dear, if it can help you, I hope you move your hand to make a fortune, give a thumbs up, I wish you a happy life! 

Ask a question about a normal 502.

Is it OK to have sticky wood flooring?

I don't know what material the floor is, the solid wood floor is difficult to recover after soaking in water, the high-pressure composite floor can absorb water and return to the level naturally after being fully dried, and the glue part can be made up with all-purpose glue, 18 flat floors, different materials, less than 100 more than a flat, high 56 hundred and one flat is also usual, mahogany floor. Even the drop of God... In case it is an antique, it will be troublesome.

If it is not caused by your personal cause, it is recommended to find the culprit. If it's you, please refer to what was said upstairs.

You can only change it, and soaking in water cannot be restored.

Let's change the floor, just change it.

Glue and then press it with a weight.

Move away secretly, don't be born.

There is no way to recover from this problem, so I advise you not to think of any way to get it.

Laminate flooring bulges after water ingress, is there a way to solve it?

Laminate flooring bulges after flooding, is there a way to uncover it? Hello, dear, according to the situation you described, laminate flooring will swell and form bulges when it gets wet. If there is a bulging phenomenon on the reinforced material transport Zheng floor, it can be repaired, but there is no way to restore it to its original state.

Once the floor has absorbed water, it is necessary to pry the floor open and place it in a sunny area to absorb the moisture. Of course, it is impossible to fully recover this method, because after absorbing water, the floor has been expanded, and it is difficult to return to its original state without high-pressure flattening. If you want to restore it to its original appearance, consider replacing the flooring.

1. Ventilation treatment: the floor is swollen with water, the first thing is to think of letting the water in the floor dry as soon as possible, the water will be volatilized from the volatilization, the floor will be dry and the natural bulging place will be calm, the floor in the family is bulging, we can open the doors and windows as much as possible, accelerate the air convection, and let the water in the floor volatilize quickly.

2. Garbage disposal at home: The wooden floor at home will leave gaps in the laying process for the floor to provide space for thermal expansion and contraction in different seasons, and if the garbage is filled in the gaps, it will affect the floor expansion and contraction, resulting in the floor bulging, so we must remove the garbage in the gaps, leaving space for the floor to expand and contract, and the place where the floor bulges will be calmed down.

3. Demolition corner line treatment: After the floor of the home is flooded, the water on the ground should be treated as soon as possible, and then the kicking line against the wall should be temporarily removed.

4. Pry up the floor treatment: after the floor at home is watered, after the ground water is quickly cleaned, you can pry up the water-soaked floor along the keel, if the water seepage involves a large area, it is possible to pry up several floors around it, and then pave it after the floor is naturally dried, which is also a way to deal with the water inlet and bulge up the floor.

5. Hair dryer treatment: After the floor at home is flooded, if the water intake is not much, you can first use a dry rag to absorb the water on the ground, and then use the cold air stall of the hair dryer to dry the water in the gap of the floor, and press the heavy objects on the seepage floor smoothly.

6. Manufacturing gap treatment: After the floor at home is swollen, if the amount of water seepage is large and the area involved is relatively large, we can directly create a destructive gap, choose a piece of the floor with serious bulging, and directly use a saw to see out a gap to ventilate and drain other floors to create space, and then pry up the damaged floor to replace it with a new one after the floor returns to normal.

7. Prevent water ingress into the floor: In the newly renovated house, many people will first carry out ventilation treatment to let the odor of the decoration materials volatilize, so you must look at the weather before opening the window, and you must close the doors and windows in advance in rainy weather, otherwise the rainstorm may float to the floor, and the water on the floor will bulge up and affect the appearance.

As far as I know, the water bulging of the wood floor needs to see whether the floor is laminate or solid wood flooring. The surface water on the floor should be sucked dry in the shortest possible time, if it is a small area of water, it is recommended not to pry up the laminate floor to dry, which is easy to cause hard damage to the laminate floor, and is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor, expose the expansion joint, and rely on the expansion joint to dissipate the water vapor, depending on the amount of seepage water, it usually takes about 3 to 10 days to dry.

Solid wood flooring in a small area of water, can be used with a high-power vacuum cleaner to suck out the water vapor, but after the expansion of a large area of water inlet causes damage to the surface paint, the soaked floor should be pried up and dried, with the same kind of paint original, the floor is repainted and waxed.

Laminate flooring bulges after water ingress, is there a way to solve it?

1. Treatment methods for composite floor bulging: 1. Heavy pressure and waxing method. A small area of warping at the joints of the floor can be pressed on it with a heavy object, and the wooden floor will return to normal on its own after a period of time; The heavily pressed floor can be waxed, and the waxed soaked floor will basically be the same as the original.

2. re-paving; 3. Change the floor. 2. Reasons for the bulging of composite flooring: 1. The floor is damp, and Peng Rising leads to the bulging of the tomb; 2. The floor will expand after being damp, and there is no room for the floor to expand around the floor, so it will bulge, and the floor will be deformed after a long time.

Hope it helps.