What s in the toolbox? What are the tools

Updated on technology 2024-07-14
6 answers
  1. Anonymous users2024-02-12

    1. A screwdriver.

    Screwdriver is a common tool used to turn the screw to make it in place, furniture and electrical appliances in daily life are inevitably fixed and assembled with screws, therefore, the screwdriver can be indispensable in the toolbox, which is divided into two types: slotted mouth and cross mouth.

    2. Tape measure. The length, width, and height of the object can be tested, and sometimes the space is limited, and the things to be purchased must be in accordance with the size, so the length and width of the object can be measured through the tape measure, which is conducive to the selection of the size of the purchased furniture and avoids the trouble of returning and exchanging goods caused by the size.

    3. pliers. Pliers can be used instead of human hands to handle sharp, sharp tools, such as removing nails from wooden boards and pulling glass out of cracks in walls, which are useful and prevent hands from being scratched. There are many types of pliers, such as wire cutters, needle-nose pliers, oblique nose pliers, round nose pliers, etc.

    4. Hand saw: also known as hacksaw, it can cut off smaller size round steel.

    Angle steel, flat steel.

    and workpieces, which can also be used to sawing small pieces of wood, plastic products, etc. In general, the saw blade is installed with the tip of the tooth facing forward, but if it is found that it is easier to reince the tooth when using it, install the tip of the tooth in your direction.

    5. Hammer: the most common striking household tool, consisting of a hammer head and a hammer handle. It is most commonly used to hammer nails, straighten or knock objects apart.

  2. Anonymous users2024-02-11

    1. A screwdriver.

    Screwdrivers are most frequently used in the home, usually used to tighten screws, install computers, furniture, etc. Screwdrivers usually have a thin wedge-shaped head that can be inserted into the slot or notch of the screw head, and there are two types: slotted and cross, in addition, common screwdrivers also have hex screwdrivers, including hexagon and hexagon sockets.

    2. Utility knife.

    Commonly known as a carving knife or wallpaper knife, it is a knife used in art and handicrafts, mainly used to cut soft things. Utility knives come in different sizes, large and small, the large ones are about 20 centimeters, and the small ones are about 10 centimeters, which can be selected according to the actual situation.

    3. a wrench. There are basically two types of wrenches, dead wrenches and live wrenches. The wrench is to use the lever principle to twist bolts, nuts, screws and other threads, usually at one or both ends of the shank with a clamp handle, when using the thread rotation direction to apply external force to the shank, you can twist the bolt, nut, etc.

    4. a hammer. The hammer is the most commonly used striking tool, consisting of a hammer head and a hammer handle, and is most commonly used to hammer nails, straighten or break objects. When applying the hammer, it is necessary to see if the connection between the hammer head and the hammer handle is firm, and be careful when using it.

    5. Test the electric pen.

    The voltage tester is also called the voltage tester, which is used to test whether the wire is electrified. When using the tester, be sure to touch the metal part of the end of the tester with your hand, put your index finger against the cap end of the tester, gently pinch the pen with your thumb, middle finger and ring finger, and insert the metal tip into the socket hole.

  3. Anonymous users2024-02-10

    <>1. The toolbox contains: active wrench, casing wrench, glasses wrench, dead wrench, hexagon wrench.

    Wallpaper knives, bolt cutters, wire strippers, terminals.

    Crimping pliers, hammers, threaders, pay-off frames, soldering iron steel tape measures, ink fountains.

    markers, etc. 2. The toolbox is often equipped with hardware tools. Hardware tools refer to the general term of various metal devices manufactured by forging, calendering, cutting and other metals such as iron, steel, and aluminum.

    Hardware tools are divided according to the use of products, which can be divided into tool hardware, building hardware, daily hardware, lock abrasives, kitchen and bathroom hardware, home hardware and hardware parts.

    3. Hardware tools include all kinds of manual, electric, pneumatic, cutting tools, auto maintenance tools, agricultural tools, lifting tools, measuring tools, tool machinery, cutting tools, fixtures, cutters, molds, cutting tools, grinding wheels, drill bits, polishing machines, tool accessories, measuring tools and cutting tools, abrasives, etc.

  4. Anonymous users2024-02-09

    <> power tools: hand drills, electric hammers, electric angle grinders, impact drills, sand mills, electric riveting guns, electric scissors, heat guns, etc.

    Hand tools: wrenches, pliers, screws, hammers, chisels, axes, knives and scissors, tape measures, etc.

    Special tools for car repair: spark plug sleeve, piston ring loading and unloading pliers, valve spring loading and unloading pliers, grease guns, jacks, etc.

    Drawing tools: pencils, colored pencils, erasers, paper, etc.

    Cooking tools: induction cooker, wok, gas canister, chopsticks, cutting board, kitchen knife, rice cooker, etc.

    Farm tools: sickles, dustpans, plows, fan carts, grinders, flat poles, hoes, etc.

    Simple tool introduction.

    1. Pencil. The most commonly used tool for sketching is the pencil, the soft and hard of the pencil refill is divided into H-B, of which the pencil refill of H-6H is harder and suitable for depicting details, and the soft refill of B is mostly used to pave the tone, and the most commonly used pencils are mainly Hb, 2B, 4B, 6B, 8B.

    2. Paper. Sketching mainly uses sketch paper, generally choose 4k and 8k size sketch paper for practice, sketch paper is slightly different from general paper, the heavier the gram, the thicker the paper, the easier to depict details.

    3. Eraser. Erasers are mainly divided into erasers and plastic erasers, generally used mostly erasers, when choosing erasers, pay attention to the special erasers for art, which is easier to erase and will not damage the paper; Plastic erasers are generally used for detail depiction, because the texture is soft, it can be pinched into any shape and wiped some details.

    4. Sketchpad. When choosing a double-sided drawing board, choose a drawing board with a flat texture and thick color, and choose 4k for the size of the drawing board, specifically 60*45 size.

    5. Pencil sharpener. Although there are also pencil rolls on the market, art pens should not be sharpened, so it is most appropriate to choose a utility knife, and remember not to use fruit knives, kitchen knives, etc.

    6. Erase paper and pen. When painting, when encountering the change of light and dark relationship between transition and transition, you need to use a pen or paper towel to soften the picture, which is generally available in stationery stores.

  5. Anonymous users2024-02-08

    Summary. 1. Commonly used electrician tools; Wire cutters, needle-nose pliers, diagonal pliers, Phillips screwdrivers, flathead screwdrivers, electrician's knives, voltage testers, etc. 2. Common tools; Active wrenches, casing wrenches, glasses wrenches, dead wrenches, hexagon wrenches, wallpaper knives, bolt cutters, wire strippers, terminal crimping pliers, hammers, threaders, pay-off frames, soldering iron steel tape measures, ink fountains, markers, etc.

    3. Special tools: pipe benders, pipe expanders, integrated wiring tools; Single-port wire cutter, five-wire cutter, module crimping pliers, crystal head crimping pliers, wire stripping knives, optical cable tools; Optical cable splicing machine, optical fiber stripping knife, cutting knife; Monitoring tools; BNC plugs, etc.

    1. Commonly used electrician tools; Wire cutters, needle-nose pliers, diagonal pliers, Phillips screwdrivers, flathead screwdrivers, electrician's knives, voltage testers, etc. 2. Common tools; Active Hidden Sakura Wrench, Casing Wrench, Glasses Wrench, Dead Wrench, Allen Wrench, Wallpaper Knife, Bolt Cutter, Wire Stripper, Terminal Crimping Pliers, Hammer, Threader, Pay-off Frame, Soldering Iron Steel Tape Measure, Ink Bucket, Marker, etc. 3. Special tools:

    pipe benders, pipe expanders, integrated wiring tools; Single-port wire cutter, five-wire cutter, module crimping pliers, crystal head crimping pliers, wire stripping knives, optical cable tools; Optical cable splicing machine, optical fiber stripping knife, cutting knife; Survey's ** monitoring tool; BNC plugs, etc.

  6. Anonymous users2024-02-07

    1. The tools in the toolbox generally include screwdrivers, tape measures, pliers, hand saws and hammers. Luokong He shouting wire knife is a common tool used to turn the screw to make it in place, Douye's daily life furniture, electrical appliances need to use screws to fix and assemble the vertical, therefore, the screwdriver is indispensable in the toolbox, divided into two types: slotted mouth and cross.

Related questions
8 answers2024-07-14

Make a plate of roast chicken. It must have come out on its own when it was hungry.

3 answers2024-07-14

Woodworking tools are divided into power tools, pneumatic tools, and hand tools. >>>More

2 answers2024-07-14

With Windows

With the release of 10, there are many system enthusiasts who are eager to imagine the experience of installing it. The following will teach you how to use the Universal PE Toolbox to install Windows >>>More

9 answers2024-07-14

I'm sorry to tell you that the current Dwarven DOS toolbox can't be used for engraving. >>>More

11 answers2024-07-14

Differences between training functions and adaptive learning functions: >>>More