How do you cut a 30 degree angle into a whole tile?

This situation is indeed very difficult to achieve.

If the toothless rotation of the hand is not enough, and the hand is not stable, it is generally not good to cut successfully.

I don't know if you want everything in two, or just one. If you want a piece, you can enlarge and cut it into a hair ruler, and then use an angle grinder to trim it.

If you use a large amount, you can only go to the stone processing factory and cut it with a table, but you also have to slowly enter the knife, and it depends on the hardness of the material of your floor tiles. If the processor says it can be cut, then it can be cut. In general, it can be processed.

Cut out a 30-degree angle of one side by:

1. Adjust the pedal of the cutting machine and the cutting piece at an angle of 30 degrees, which is simple and easy, and you can know it at a glance;

2. Have a suitable mold and use it correctly, and have a wide range of applications;

3. If the hands-on control ability is strong, it can also be operated manually.

Ceramic tile and tile are refractory metal oxides and semi-metal oxides, through the process of grinding, mixing, pressing, glazing and sintering, and form an acid-alkali resistant porcelain or stone, building or decorative materials, called ceramic tiles. Its raw materials are mostly mixed with clay, quartz sand and so on.

Don't cut it directly, first cut a groove on each side, and then use a small power machine to cut, if you don't have a small power machine, master the strength and grind slowly.

Unless you use a professional stone cutting tool, that is, stone processing there, or make a whole cabinet, because the cabinet surface is made of marble.

The method of cutting 45 degrees of ceramic tile is: it is more convenient to use a cutting machine, when the tile touches the corner with a cutting machine to pour a 45-degree angle, it must not hit the glaze, and leave a line of nearly one millimeter with the glaze edge, because if the saw blade touches the glaze, it is easy to break the porcelain and the cutting can be completed.

When you go to the porcelain shop to buy tiles, if you need tile chamfering, then the porcelain shop will directly send the tiles to the tile processing factory for processing. Tile chamfering must be processed into a 45 degree angle in a professional tile processing factory, 800x800 ceramic tiles are processed into two 400x800 bricks, and two long sides of 400x800 bricks are processed into 45 degree angles.

The 45-degree angle of the processed tile is like a knife cut, think about the whole living room wall tile to be tiled by the master to grind with a hand grinder, not to mention the time-consuming, the grinding out of the angle is irregular, and it is easy to collapse the porcelain.