What is the reason why the freshly laid solid wood floor will fade?

The paint quality of the wooden floor is very poor, and without the practice of closed varnish, this wood will be much worse.

The reason is very simple, because the surface of the solid wood floor will also be painted for the sake of beauty.

There are many reasons why floors can fade.

The causes of discoloration are:

1. The photodiscoloration reaction of wood (simply put, it is sunburned) The discoloration of wood is mainly caused by the absorption of ultraviolet light, and the degree of discoloration of the sapwood and heartwood after absorbing ultraviolet light is different, which will lead to a certain color difference in the floor after paving.

The resulting photochromia is a normal phenomenon, and the quality of the product is not a problem. Therefore, the paved floor should not be exposed to the sun for a long time, and the necessary shading measures should be taken appropriately.

2. The influence of external factors (caused by moisture or heat) is mostly in the geothermal environment. Before the geothermal floor is paved, the moisture content of most of the ground is about 20%, and in the process of floor paving, due to the damage of the moisture-proof film, a large amount of moisture enters the floor from the damaged place during geothermal heating, resulting in a sharp increase in the moisture content of the floor, resulting in mildew or bluewood degeneration.

1. Sunlight ultraviolet rays.

The main raw material of sports wood flooring is all kinds of solid wood, which will change color when absorbing ultraviolet rays. The production log of sports wood flooring, the sapwood of the wood and the heartwood have different degrees of discoloration after absorbing ultraviolet light, which will lead to a certain color difference in the paved floor. This is a natural phenomenon and cannot be avoided.

Sports flooring. 2. The paved ground is not leveled.

An important preparation for the installation of sports wood flooring is leveling and dehumidification. In order to save money, some stadium contractors and Party A invite no installation experience of sports wood floor installation workers to work, these guys are good to do, can save trouble on the trouble, sports wood floor paving site is not leveled, nor dehumidified, the result of the sports wood floor damp discoloration.

3. The moisture-proof film is damaged.

There are sand particles on the ground, which are not cleaned, and the moisture-proof membrane is broken, resulting in breathability. During geothermal heating, a large amount of moisture escapes into the floor from the damaged place, resulting in a sharp increase in the moisture content of the floor, the dissolution of some soluble substances in the wood and the action of some color-changing bacteria, resulting in the discoloration of the sports wood floor.

1. It is normal for solid wood materials to change color.

Sports wood flooring is made of solid wood, easy to absorb ultraviolet light after discoloration, solid wood flooring is natural wood, with the natural properties of wood, the resulting light discoloration is a normal phenomenon, not a product quality problem.

Gymnasium wooden floors.

2. Improper paving will change color.

Before the sports wood floor is paved, the moisture content of most of the ground is about 20%, in the process of floor paving, if the moisture-proof film is damaged, when the geothermal heating, a large amount of moisture escapes into the floor from the damaged place, resulting in a sharp increase in the moisture content of the floor, and some soluble substances in the wood are dissolved and some color-changing bacteria are taken into effect, resulting in wood exhaustion or blue change.

When paving the sports wood floor, the ground is not leveled, resulting in the moisture-proof film being broken after paving, resulting in air permeability; Or when paving, the ground is not cleaned and other similar situations will cause discoloration of sports wood flooring.

3. Improper maintenance will change color.

Sports wood flooring should also be well maintained. Discoloration can also occur if not properly maintained. For example, the sports wood floor is soaked in water, which leads to mildew and discoloration of the sports wood floor.

There are also sports wood floors that are exposed to sunlight for too long and can also change color. Dance studios and theater stages should be strictly protected from water leakage and stagnant water, and appropriate shading measures should be taken, such as closing the curtains, so that there will not be too much color difference.

In fact, the discoloration is caused by the oxidation of a protective film on the surface and the friction in use, and what we see after the discoloration is the true color of the wood floor, and the wood is different from the one before and after the painting. The color is darker when painted. Therefore, solid wood flooring should be maintained frequently.

The usual maintenance method is to wax and polish the wooden floor. ,, play once in the first two or three years, and at least once a year thereafter.

Ruicheng floor experts analysis: solid wood floor discoloration is generally caused by the following three main reasons:

1.Changes in paint due to the influence of the external environment (floor essential oils).

2.Changes resulting from a chemical reaction between paint and wood.

3.The discoloration of the wood itself is affected by the external environment, such as sunlight and indoor air environment.

It won't fade at first, but it will fade over time.

Laminate flooring is made by pressing the log at high temperature and high pressure after adding preservatives and additives after the log is crushed, so it breaks the physical structure of the log and overcomes the weakness of poor stability of the log. Laminate flooring has high strength and uniform specifications.

1. High wear resistance, anti-corrosion and anti-moth. Laminate flooring also needs maintenance, but relatively speaking, it is relatively easy, and it is usually enough to mop it with a non-dripping cloth. Laminate flooring is a lock-mounted installation method that is easy to install or remove, and can be easily removed if you want to reuse the flooring when you move.

The surface of parquet is composed of natural wood, which is not deformed, cracked, easy to pave, and has good surface wear resistance and anti-slip flame retardant performance.

Theoretical elaboration: Solid wood parquet is divided into three layers: three-layer parquet, multi-layer parquet, and new type of parquet, because it is made of different tree species of staggered lamination, so it overcomes the shortcomings of one-way isotropy of solid wood flooring, small dry shrinkage and wet expansion rate, has good dimensional stability, and retains the natural wood grain and comfortable foot feeling of solid wood flooring.

No, laminate flooring is produced with decorative paper, and there is no problem of fading!

Of course not, new flooring is not prone to color fading.

1.The large-scale flooring innovative machinery is used to polish and remove the paint layer, surface layer and wood layer for about millimeters, and then carefully sanded to make the floor delicate and lubricated to a new condition. The corners of the floor are polished with a small angle grinder to achieve the overall smoothing effect.

2.Remove the original side seam clear putty and seal the seam from the beginning.

3.Apply the first UV primer and bake it dry with a photosensitive landline.

4.Carefully grind with sandpaper to grind the surface layer until it feels slightly rough, remove the dust, and apply a second layer of UV topcoat.

5.Wait for the final coat to dry and apply floor wax.

This is mainly due to the blue staining of the wood, for the following reasons:

1. Poor control of moisture content.

Only when the moisture content of wood is higher than 20, microorganisms such as color-changing fungi can multiply and grow.

2. Rich in nutrients (nutrients).

The starch and monosaccharides in wood are the energy needed for the growth of blue-staining bacteria, and because the starch and monosaccharides in rubberwood are much higher than those in other woods, rubberwood is more susceptible to blue-staining than other woods.

3. Air. Most fungi are aerobic and must be present with oxygen in order to grow. But they require very little oxygen, and when the oxygen content in the air reaches 1, the fungus can grow.

4. Temperature. The most suitable temperature for fungal growth is 20 30, and the temperature is lower than 10 and higher than 35, and the growth rate of fungi is slower.

5. pH.

The fungus is suitable in a weakly acidic medium.

One of the reasons for the discoloration of wood flooring is that the moisture-proof film is damaged during the floor laying process, and a large amount of moisture escapes into the floor from the damaged place, resulting in a sharp increase in the moisture content of the floor, and the dissolution of some soluble substances in the wood and the action of some color-changing bacteria, resulting in wood exhaustion or blueness.

Due to the wear and tear of the wear-resistant layer on the surface of the floor, the use of the floor is seriously affected, which should be a quality problem of the floor; The laminate flooring has a discoloration of the board surface when it is used, which is due to the unqualified quality of the printed wood grain paper on the surface of the floor, which turns blue and white under ultraviolet radiation, which seriously affects the beauty of the floor; In accordance with the national wooden floor warranty regulations WB T 1017-2002, the laminate floor has a whitening of the board surface and discoloration of the board surface, and the floor that exceeds the standard shall be partially replaced by the laying unit.

Wood flooring is the most popular floor decoration material, although the wood floor is comfortable, the texture is exquisite and beautiful, but if it is used for a long time, it will fade, if it is not treated, it will affect the aesthetics of the home. So how to make up the color of the fading wood floor? What is used to repair the fading of wooden floors?

Next we bring the wood floor to a fading remedy for the introduction.

How to remedy the fading of the wooden floor?

1. Repaint and refurbish.

The paint on the wooden floor will fall off due to too long time, which will affect the beauty of the floor, so the floor must be painted every few years. Before painting, it is also important to remember to polish and dust the surface. Lacquering makes the floor smoother, cleaner and brighter.

2. Re-lay the floor.

There are many reasons for the discoloration of the floor, such as wear and tear, sun exposure, soaking in water, etc., find someone to replace the fading floor. The paved floor should not be exposed to the sun for a long time, and the necessary shading measures should be taken appropriately.

3. Waxing care.

The method of re-waxing can be used to coat a layer of wax on the surface of the wooden floor, and the wax is cured to isolate air, water vapor and dust, which plays the role of complementing color on the one hand, and at the same time plays the role of anti-slip, anti-wear and anti-static, so as to better maintain the floor and prolong the service life of the floor.

What is used to repair the fading of wooden floors?

Shovel spatula + floor wax.

The floor paint falls off, first of all, we can use a small shovel, thin iron sheet or knife to carefully shovel off the paint off the place, and then apply transparent varnish to the primer part, and finally wipe the floor with floor wax, which can not only repair the floor paint, but also play a certain role in maintenance.

Cleaning + repair wax.

First, use a dry rag dipped in vinegar water to scrub the peeling area, then wipe it with a damp soft cloth stained with alcohol or tea, and finally apply the floor repair wax to the peeling area and let it dry naturally.

Polishing + waxing.

If the floor paint doesn't peel off much, you can apply paint to the peeling area, and then polish, wax, and wipe it.

Professional paint repair company.

If the floor paint peels off a lot and it is difficult to repair, then we can directly find a professional floor paint repair company to repair it.

The above is the introduction of the remedy for the fading of the wood floor, if the wood floor at home is fading, then you can consider renovating the wood floor, knocking it off and re-laying the floor or treating it with waxing, and the specific remedy needs to be the actual situation of the wood floor fading. The fading of the wooden floor can be repaired with a shovel + floor wax, washing + repair wax and polishing + waxing.