The ceiling in the kitchen has fallen off, can I install it back myself?

We'll be able to paint. Of course, the paint must be waterproof paint with the best effect, which can be consulted at the local paint shop, and then choose your favorite color, and brush it several times. In the future, when we want to wash again, we can wash it directly with water, and it will not have any effect on the wall.

The walls and ceiling of the kitchen were also blackened by the long-term oil smoke, and no one cared about it at that time. Now it's different, people's living standards have improved, and they will pay much more attention to the time around them than before, so I will give you a brief explanation of how to clean the walls and ceilings that are blackened by oil smoke.

<> if the original ceiling is plywood, it will be re-nailed directly, because there is no need to re-tie the keel, which is very cheap. As for the wall, if the tile has been pasted, it is also cleaned with hot water dish soap; If it is an earthen wall, consider repainting it with cement mortar; If the putty has been scraped, the original putty should be polished first, and the putty should be re-applied, which is more labor-intensive. The power of the air fan depends on what you need to buy, and the choice is quite wide.

Not to mention the anti-yellowing of the old smallpox top batch putty, it may have been deformed after a long time, which affects the renovation effect. The wall can also be covered with gypsum board, which can effectively prevent the new wall from turning yellow, and can also improve the flatness of the wall, so that the new decoration and renovation effect is better. When sanding the wall with sandpaper, you should choose sandpaper of different thicknesses, and the thickness of the sandpaper should be written on the back in the form of numbers, the larger the value, the finer it is, and vice versa.

Because my family rebuilt the house last year, remodeled the kitchen, the walls are all covered with tiles, the general grease stain can be wiped clean with a cloth, and a long stick is wrapped around the rag where it is out of reach, don't ask me why I know so clearly......Because I just cleaned up the oil stain a few days ago.

Yes, with the help of tools, if you can't do it alone, you can make an appointment with a worker master from the outside, and if it is old, you can choose to make a new one.

Of course, no, if the ceiling falls off, you must find a professional decoration master, so that you can better ensure its quality.

Yes, you have to be careful not to use too much force, not to affect other things, not to destroy other things.

No, because the ceiling requires skill, or you should contact the relevant professional personnel to do a good job of repairing, so that it is safer.

No, because you don't have the corresponding technology, it may not be installed firmly.

This depends on the situation. Here are 2 scenarios for your reference:

1. Generally, the ceiling is decorated with gypsum board roof, because the surface coating has been good, and the keel has been fixed, even the removed gypscale should be damaged at this time, so this must not be installed in other places.

2. If the ceiling you make is a square block of mineral wool board or aluminum plate ceiling, it can be removed and reused (that is, the splicing ceiling is used to suspend the ceiling).

There is a card slot on the edge of the ceiling, which is generally fixed with self-tapping, and some are also interference fits, which can be started down with appropriate force, and then taken down one by one, each piece is fixed by self-tapping wire and can be disassembled one by one. Hope you succeed.

You can take a flat screwdriver and take off a piece, and you will understand what is going on.

The following is an introduction to the structure of the ceiling:

Aluminum gusset ceiling with wood to do support, also with steel structure, each has an advantage, generally with steel structure more, specific construction methods: first on the original top with an electric hammer hole, in the eye into the ceiling special expansion bolt and hanging bar, and then the aluminum buckle plate special buckle bar on the hanging bar, the wall with a corner aluminum circle, you can on the aluminum buckle plate. When you go to buy a gusset, different aluminum gusset plates have matching gusset strips and angle aluminum.

The edge part of the ceiling has a fixed strip one by one, which can be removed piece by piece, but it is recommended not to find a professional yourself, it is not easy to install.