How to stick the water on the sweater, what to stick to the drill on the clothes

First, put the glue stick on the drill after hot melting, then heat the glue on the drill again, and then quickly press it to the place where the sweater is to stick.

Second, if you simply want to put rhinestones.

Glued to the sweater can also be made with hot melt adhesive.

3. There is a kind of rhinestone bought in the tailor shop, and after putting it on it, it is ironed with an iron, and the glue on the back will melt and stick to the clothes.

Fourth, use stick glue, that is, a cylindrical transparent rod, which will melt as soon as it is heated, and be used to stick things when it melts, and it will solidify when the rhinestone is dried.

Fifth, there is also the jewelry you have diamonds to buy you can use transparent nail polish first.

Apply a layer to the surface to prevent the rhinestones from falling. You can also use rhinestones that have been glued off directly with nail polish.

If you simply want to drill and stick to the sweater or use hot melt adhesive, I will teach you a method, I have done this, put the glue stick on the drill after hot melting, and then heat the glue on the drill again, and then quickly press it to the sweater to stick to the place. There are a few points to pay attention to, 1, the glue should not be too much, too much glue is easy to overflow to the drill edge, affecting the appearance. 2. When you press the sweater after the hot melt, you should use your hands to pad the part to be glued under the sweater, and press it together, and wait until it is cold.

This glue stick is very cheap, you don't need a glue gun, just burn it with a lighter.

Pick it up when you drop it, it's convenient.

Fabric soft rubber: especially suitable for bonding between various fabrics. AB Glue:

The bond strength is fine, and it will not be particularly hard after bonding, but its disadvantage is that the color of the breast is more obvious, and there will be adhesive marks after pasting. 502 glue: the adhesive strength is large, but compared with the cloth soft glue and AB glue, 502 glue is not as good as the first two.

The disadvantage of 502 glue is that the bond will be hard and obvious. <

1. Fabric soft rubber: especially suitable for bonding between various fabrics. It is colorless and transparent, will not turn white after pasting, can achieve seamless bonding, no traces of bonding can be seen, and will not harden after bonding.

2. AB glue: the bonding strength is no problem, and it will not be particularly hard after bonding, but its disadvantage is that the color of the breast is more obvious, and there will be traces of adhesive after pasting.

Glue: The adhesive strength is high, but compared with the cloth soft glue and AB glue, 502 glue is not as good as the first two. The disadvantage of 502 glue is that the bond will be hard and obvious. If you do not handle it carefully when bonding, it is easy to leave bonding marks.

Rhinestone maintenance tips on clothes:

1. Reduce the number of brushing of rhinestones on clothes.

2. Control the temperature of the cleaning water, and it is best to use cold water for cleaning.

3. Try to avoid pulling the rhinestones on your clothes with your hands.

Summary. 2.Jet it from the reverse side with a hot steam iron, and the drill will fall off. Remember to hang up your clothes so they don't leave a mark.

Hello, check for you right away.

Use a hair dryer to bake the back of the rhinestone, so that the glue part becomes soft, and the rhinestone will automatically fall off, and then put the trace key into the basin for normal washing. The rhinestones on the sweater are glued on, so the only way to remove them is to heat them.

Precautions: When baking, it is best to pad a piece of paper first to avoid damage to the sweater caused by overheating.

2.Jet it from the reverse side with a hot steam iron, and the drill will fall off. Remember to hang up your clothes so they don't leave a mark.

I hope mine can help you and have a great day.

Summary. How to deal with the drill off the clothes:

1. Glue the drill on. There is a special glue that can be applied to the drill on the clothes. You can prepare toothpicks and tweezers, and use toothpicks to dip the glue to the place to be glued, not too much. Stick it with tweezers and let it dry.

2. Put the dropped drill in the position of the original clothes, spray the hot air on the clothes with the iron of the clothes at home, melt the glue on the clothes with high temperature, and then stick the drill on it to dry.

3. Go to the tailor shop and ask a professional tailor to sew the drill on.

How to deal with the broken tassel rhinestone chain on the clothes.

Find a store that has retail rhinestones, it's best to use the glue from the store, don't use 502, 502 is corrosive.

Reattach. You can also go to the shop where you buy jewelry and trinkets, and they will match it for you and stick it for you.

How to deal with the drill off the clothes: 1. Glue the drill on. There is a special glue that can be glued to the clothes leak and know on the drill.

You can prepare toothpicks and tweezers, and use toothpicks to dip the glue to the place to be glued, not too much. Stick it with tweezers and let it dry. 2. Put the fallen drill in the position of the original clothes, spray the heat on the clothes with the iron that irons the trembling clothes at home, melt the glue on the clothes with high temperature, and then stick the drill back to dry on it.

3. Go to the tailor shop and ask a professional tailor to sew the drill on.

Summary. Hello dear! I am a life expert Xiaotan, I am happy to serve you, I have many years of experience in home life, good at outdoor products and quality of life improvement.

I've received this question from you, Xiaotan needs a little time to query and sort out the information, it will take about 5 minutes, please wait a minute

How can the glue from the spot drill stick to the clothes and get rid of it.

Hello dear! I am a life expert Xiaotan, I am happy to serve you, I have many years of experience in home life, good at outdoor products and quality of life improvement. I've received this question from you, Xiaotan needs a little time to query and sort out the information, it will take about 5 minutes, please wait a minute

Dear, please wait a minute

The method of removing the glue of the sticky drill: 1: Blow the glue hot with a hair dryer, and gently scrape the glue to fall off.

Two: Drop glue on the original place to melt the original, and then quickly wash it off with water. Three:

With insulating oil, pour some insulating oil in the transformer on the clothes, the glue will quickly become soft and can be rubbed off quickly. Four: Apply acetone to the adhesive and wait about 5 to 10 minutes to remove.

Dear, try these methods and see if they work

Okay, thanks dear.

Satisfied. You're welcome

Agree] goodbye.

Okay bye-bye

1. All-purpose bai glue (preferred).

2. After the plastic melts, the rhinestones and clothes are adhered to

3. Porcelain white glue dao

The water version drill on the clothes is missing:

Expensive rhinestone jewelry is best to find a professional repair shop;

If it is not very expensive, you can also glue it with a sticky drill, and throw it away directly if it is cheap.

Now the quality of domestic drills is generally not good, and if the drill is lost, it is also very troublesome to buy a similar one, and the unit of rhinestone is Luo, 1 Luo is equal to 144 rhinestones, and it is very troublesome to buy only one rhinestone.

To tell you the easiest way, is to use a lighter to stick the rhinestone to the part of the clothes with fire, the rhinestones will naturally be sticky, so that it can be easily glued, and there is no trace of my bag or clothes Rhinestone fell off I do this

There are glue guns on the market that sell special adhesive jewelry, and the rubber strips inside are generally sold separately and dissolved with a large firer, and then the sticky rhinestones are relatively firm! My family used to sell rhinestone jewelry

Just use a linen cloth dipped in gasoline to rub off the offset print little by little. There are no traces at all, and there is no damage to the clothes.

How to remove grease stains: Grease stains are commonly known as oil stains, which are insoluble in water. This kind of stain should be removed from the clothing by wiping or brushing with organic solutions such as solvent gasoline, trichloroethylene, tetrachloroethylene, alcohol, acetone, Xinna water, banana water, turpentine, benzene, etc.

In addition, there are other effective methods that can be used to remove them.

1. Removal of animal and vegetable oil stains.

Animal and vegetable oil stains are common stains on clothing and are also a polar liquid stain. Such stains should be wiped or brushed with organic solutions such as solvent gasoline and perchloroethylene. When brushing, use a towel or cotton cloth to absorb the wiped stain solution in time to remove it from the surface of the clothing.

Prevents some stains from remaining on the surface of the garment after the solution has evaporated, which can cause marks on the surface of the garment. If marks appear, they can be removed by repeated wiping or extended brushing. You can also apply water to the stains of your clothes and spray them off with a high-pressure spray gun.

2. Removal of pine oil stains.

When transporting pine wood, it is easy to make the clothes stick to the pine oil, which should be removed in time. According to the principle that pine oil can be dissolved in alcohol, it can be brushed on the stain with alcohol or a mixture of alcohol and turpentine, and then wiped with a wet towel after the pine oil stain is soaked and dissolved. If there are still marks, scrub them with gasoline again, and repeat them several times until they are clean.

3. Removal of tung oil stains.

Tung oil is a viscous vegetable oil that does not dry easily and is not easy to remove when stuck to clothing. It can be brushed with gasoline or kerosene to dissolve the tung oil and remove it, and then the traces left behind by alcohol soap are removed. It is best to wash the stained garment with detergent again to completely eliminate the marks.

Generally, the glue stains on the clothes can choose the freezing method, and then gently scrape off with a sharp blade, and then rub them by hand, so as not to leave traces of individual stubborn traces

How to remove glue and gelatinous pigment stains Stains on clothing are difficult to remove and can only be removed by a suitable method. 1. The removal of universal glue stains on the clothes stained with universal glue stains, can be used acetone or banana water drops on the glue stains, to use a brush to continuously and repeatedly scrub, until the glue stains become soft and taken off from the fabric, and then rinsed with water. If it doesn't work once, you can brush it several times repeatedly and finally wash it.

Do not use this method for fabrics containing acetate to avoid damaging the fabric of the garment. 2. Removal of white latex stainsWhite latex is a synthetic resin, which is polyvinyl acetate syrup. It is characterized by the fact that in addition to nylon silk and the like, it has an adhesive effect on most fiber quality materials, so it can be firmly adhered to clothing.

It also has the ability to dissolve in a variety of solutions. Let's use its own characteristics to find a way to get rid of it. Available in 60 liquor or 8:

2 The mixture of alcohol (95%) and water soaks the white latex stains on the clothes, and after soaking for about half an hour, you can scrub with water until it is clean, and finally rinse with water. 3. To remove chewing gum stains, you can first use raw egg white to remove the viscose on the surface of the clothes, then wipe off the loose residual particles one by one, and finally wash them in soap, and finally rinse them with water. If it is a fabric that cannot be washed, it can be applied with carbon tetrachloride to remove any residual dirt.

4. Removal of glue stains If the clothes are stained with glue and other stains, the polluted part of the clothes can be soaked in warm water, when the stains are dissolved in water, then rub them by hand until all the stains are rubbed off, and then wash them with warm washing liquid, and finally rinse them with water. 5. Removal of watercolor stains In order to increase the fastness of coloring, an appropriate amount of water-soluble gum is added to the pigment in order to increase the fastness of coloring. When the clothes are stained with watercolor stains, first use hot water to dissolve the gum in the stain to remove it, then use detergent or light ammonia to decolorize, and finally rinse it with water.

White clothing can be decoloured with hydrogen peroxide.