What is the design of the partition between the bedroom and the cloakroom?

In fact, for many people, having a cloakroom will make life more convenient, but there are many houses that will not consider the cloakroom when designing, because most families should still choose to put cabinets in the bedroom.

In general, as long as the bedroom area of the family is large, you can consider dividing the bedroom into a cloakroomIn general, we can make a cloakroom in a large bedroom, and we can make a wall-sealed cloakroom. In general, we can make good use of the area where we have just entered the door and divide a cloakroom here, that is to say, make a cloakroom in the area where the master bedroom has just entered the door.

In addition, a cloakroom can be cleverly designed in the corner of the bedroom. It is in the place where most families put cabinets, and a cloakroom is separated here, but it is necessary to pay attention not to leave the bedroom area too small, but also do not design the cloakroom too tightly, because if the cloakroom is too crowded, the effect is not particularly large, and it may still need to change clothes in the bedroom.

And you can also go to the place where you use the dressing, and change the dressing place into a cloakroomThen the dresser is embedded in one of the walls of the cloakroom, which can be dressed up in the cloakroom, and this not only saves space, but also shows a sense of luxury, which can be said to kill two birds with one stone, which is also the choice of most families when changing the cloakroom.

If the bedroom area is not particularly large, one wall of the bedroom can be cleverly used as an open cloakroomThis choice is also very ingenious, and this choice will make the bedroom look a little bigger, but the cloakroom that may be made by this choice will not have a strong sense of luxury, but it is very practical, and the overall look will be more harmonious.

In addition, some friends with smaller bedrooms are recommended not to go to the partitionI have seen some friends who have to separate a cloakroom from a smaller bedroom, which will make the bedroom look cramped, and there is no big place in the cloakroom, no matter what you are doing, it will be awkward, at this time consider putting two cabinets on a wall, which is also a good choice.

Therefore, there are many partition schemes between the bedroom and the cloakroom, you can make a partition at the bedroom door, you can also make a partition on a wall, and you can also make some open cloakrooms, but what kind of cloakroom to do depends on the type of house and the size of the house.

The partition is designed with a translucent sliding door, which can be very concealed and will not stain the clothes in the cloakroom with a lot of dust.

If you want to separate the bedroom from the cloakroom, you can use sliding doors or swing doors as partitions.

Clever use of recesses, clever use of the door area, clever use of corner areas, clever isolation of the cloakroom, the use of the whole wall as an open cloakroom, but in the design must be accurate calculation of the space, but also to make the two look very harmonious and comfortable, very practical.

At this time, it is necessary to plan well in advance, and it is also possible to install a glass door, and then you can also choose a sliding door, and you can also set up a hidden cabinet door.

Although the bedroom and cloakroom are two functional rooms, but because they are a whole, they can not differ too much in the decoration style, otherwise the two rooms will look messy, the partition between the bedroom and the cloakroom is not only the bridge between the two rooms, but also the distinction, so its style should also be unified with the two rooms, for example, if the bedroom and cloakroom are casual and simple, then the partition can not be designed too complicated, if the bedroom and cloakroom are gorgeous and elegant style, the partition design is too simple and thin. It is worth noting that the partition is a decorative decoration, especially the partition between the bedroom and the cloakroom, and should not be too ornately decorated, otherwise it will be noisy.

The design of the partition between the master bedroom and the cloakroom should be considered according to individual needs and the layout of the space. Here are some common partition methods for reference:

1.Use architectural walls: This is the most common form of partition and can be achieved by building a brick or drywall wall between the master bedroom and the cloakroom. This provides better sound insulation and allows the two spaces to form separate private areas.

2.Use movable partitions: If you want the flexibility to connect or separate the master bedroom and walk-in closet when needed, consider using movable partitions such as folding doors, sliding doors or foldable screens.

This allows the use of space to be flexibly adjusted according to actual needs, and the front-aged closure increases variability and functionality. Acre.

3.Use glass partitions: If you want to maintain a visual connection between the master bedroom and the cloakroom, but at the same time need some separation, you can choose to use glass partitions.

This method not only makes the best use of natural light, but also effectively divides the two areas, and can choose different transparency and decorative effects to achieve an aesthetic effect.

4.Use furniture or screens: In addition to walls and partition doors, you may also want to consider using furniture or screens to separate the master bedroom from the cloakroom.

For example, a large wardrobe, shelf or decorative screen can be placed to meet the needs of the separation between the empty and silver cracks, and to add storage function or aesthetics.

The above are common partition methods, and the specific choice should be decided according to personal preferences, actual needs and space layout. It is also advisable to consult with a professional interior designer or decorator, who will be able to provide more specific design solutions and suggestions according to your needs and site conditions.

The partition between the master bedroom and the cloakroom needs to be designed with practicality and aesthetics in mind. Here are a few common partition schemes:

Glass partitions: Glass partitions can add a sense of style and sophistication to a room, while also allowing the master bedroom to be connected to the cloakroom. Glass partitions are usually made of tempered glass material, which has the characteristics of good explosion-proof, fireproof and anti-theft.

Fabric partitions: Fabric partitions can be decorated with curtains or heavy gauze screens, which can not only ensure privacy, but also play a role in beautifying the room. In addition, fabric partitions reduce noise disturbances and provide a better sleeping environment.

Wooden partitions: Wooden partitions are a classic design solution that can be matched with different woods and colors depending on personal preference. In addition, wooden partitions can also be matched with furniture in a unified style, making the room more tidy and beautiful.

Solid wall partition: Solid oak wall partition is the most traditional design method, which has the advantage of stable structure and good sound insulation. However, solid wall partitions need to occupy a certain amount of space, and at the same time, it will also affect the overall aesthetics of the room.

In short, the design of the partition between the master bedroom and the cloakroom needs to consider a number of factors to choose the right solution for you. When choosing partition materials, it is necessary to pay attention to environmental protection, moisture-proof, fireproof and other properties to meet the needs and safety requirements.

In the midst of interior design, I always felt that the cloakroom was too narrow. Want to expand the entire wardrobe into a cloakroom. Small houses do not have such a large pattern and area, how to have a cloakroom and retain the position of the wardrobe, today we will take a look at what kind of design can make the wardrobe and cloakroom coexist, so that you can enjoy the feeling of having a cloakroom.

When designing a wardrobe for a small occasion, the wardrobe will be placed in the bedroom, due to the limited space capacity, there are many lattices required inside, and it is impossible to unify them all, all of them are made into large wardrobes and lattices, and it is impossible to become a cloakroom.

The house that needs to be renovated should be replaced, when the house is newly renovated. It is possible to choose which coherent wardrobe door to use. Instead, opt for a one-piece wardrobe sliding door that can be folded into a zigzag shape and pushed to the corners, so that no matter what kind of lattice combination the interior space is, the exterior does not affect its appearance and can be pushed to open completely.

This reduces the amount of space in the room and allows the wardrobe to be well displayed. You push the door like this, and the whole room is your dressing room.

Another way to decorate is to superimpose the coherence of the whole house on the inside of the wall. Then it looks very integrated from the outside, so that the whole space can not only expand the comfortable decoration state. When the sliding door opens, it opens to the entire space of another room.

When the sliding door is closed, it will look three-dimensional, like a separate locker room. There is also this double-door wardrobe treatment, with two types of sliding doors on both sides. When it is closed, it is very complete.

When it opens, the two sliding doors are taken apart, which is a completely separate cloakroom. This design approach is now popular among relatively small apartment types. If the layout is large enough that the bedroom does not need to be that wide, you can leave part of the bedroom in the corner, divide the walls with glass, and then spread a mat inside, so that the space inside the partition becomes a separate dressing room.

By creating a simple version of the slide hanger, which can be casually assembled on the wall, the whole space looks more organized.

If the area of the house is relatively large, the master bedroom and bathroom can be connected to the cloakroom, so that the function of the cloakroom can be greatly released; For homes with spacious bathrooms, you can use the entrance to make a row of wardrobes and set up a large area of dressing mirrors to extend your vision, making daily life more convenient and fast; If it is an independent cloakroom, the design should reasonably arrange lighting, color and other elements, so that it can be integrated into the overall style of the interior and maintain a unique atmosphere. Cloakroom furniture can be purchased outside, or it can be designed and made as a whole during decoration, in order to save space, the cloakroom is best designed to be a push-pull type, and the wardrobe inside can not be a door.

I hope my manuscript will be helpful to you.

Introduction: It is our common wish to set up a walk-in closet in the master bedroom at home, or a bedroom that is not so small in size. The four types of cloakrooms introduced here are very instructive to use different materials and the characteristics of different spaces to create suitable cloakrooms.

Cloakroom 1

It is a common desire to have a walk-in closet in the master bedroom of the home, or a bedroom that is not so small. The four types of cloakrooms introduced here are very instructive to use different materials and the characteristics of different spaces to create suitable cloakrooms.

Cloakroom 2

Design a square cloakroom for the large boxy bedroom.

The sliding door can be used as a cloakroom in the bedroom according to the size of the space, and the cloakroom can be accessed from any angle, which obviously expands the range of activities of the bedroom space. The square bedroom space is not easy to use, and here a sliding door is used to directly separate a walk-in closet with a wardrobe, and the construction work is not large. It's the equivalent of splitting a bedroom in two.

Cloakroom 3

The wardrobe is made in the most popular red color, which is the most intense expression and enhances the sense of linearity and artistry. The five sliding doors used here are abrasive glass with red paint on the back. Because the glass can transmit light, there is no need to prepare special lights in the cloakroom, and with the help of the bedroom lamp, you can see the inside of this Mimi cloakroom clearly.

The interior of the cloakroom is designed as a tic-tac-toe structure.

Cloakroom 4

The shelves and clothes poles inside the cloakroom are the same as the sliding doors, and the top and bottom are securely installed on the ceiling and floor respectively. In terms of materials, it is best to choose light wood and aluminum frames, and ensure that there are certain gaps when designing the internal structure to maintain ventilation inside the cloakroom. If possible, leave room for later adjustment of the height and width of the cloakroom interior at the beginning of the design installation.

Two sliding doors in the corner of the cloakroom are connected at the corner seams. The sliding door on the left opens to act as a wardrobe for easy access to clothes; The sliding door on the right opens to enter the walk-in closet, where infrequently used clothes are kept. It is a delicate design that has both a wardrobe and a cloakroom.

The interior of this cloakroom is relatively spacious, and the wall facing the bed is unused. If you have too much clothing, you can add shelves to this wall to increase storage space.

Having a separate cloakroom is the wish of almost every family, which can be used to store the family's clothes and avoid the problem of insufficient storage space. Moreover, the independent cloakroom has clear functional partitions, which is also very convenient to use. However, the area left for the cloakroom is different for different apartment types, and there are differences in the interior design of the cloakroom.

3 or so compact cloakroom design

This is the minimum area requirement for a separate cloakroom, the wardrobe needs to occupy a width of about 60cm, and the aisle for people to walk is at least about 60cm, if you want to meet the needs of dressing and changing, the aisle needs to be widened appropriately. For this compact independent cloakroom, the design of the internal wardrobe can be considered in a straight line or L-shape, closed or open design. It should be noted that because of the small area, in order to increase the storage area, many people choose to widen the wardrobe, but remember to ensure that there is a normal activity space, otherwise the cloakroom is purely just a decoration.

5 or so medium-sized cloakroom design

5 Medium-sized cloakrooms are almost the most common and cost-effective independent cloakrooms. In addition to the basic wardrobe and other storage areas, you can also add dressing tables, dressing mirrors, etc., which can meet various needs such as changing clothes and makeup at the same time. Of course, you can also consider increasing the space for ironing clothes to improve space utilization.

Large cloakroom design for 7 and above

"The cloakroom should be big. "This is a requirement that many people ask when they are decorating their cloakrooms, but only for large units. 7 and above large cloakroom, the internal layout is more free and flexible, you can customize a large-capacity wardrobe to meet the storage needs, in addition to clothes, bags, shoes, scarves, cosmetics, jewelry, etc., can be stored.

At the same time, a central island can also be added to take into account various needs such as storage, makeup and hair, and the functions are more abundant and diverse.

Separate cloakrooms of different sizes have slightly different internal layouts and designs, which need to be designed for different situations and needs.