Can lime poured into a well kill insects? Can I still drink the well after sprinkling quicklime on i

Sprinkled lime in wells can kill some microorganisms and insects; The main function of lime sprinkled in the well is to disinfect and sterilize, and sprinkle lime water.

Organisms such as floating debris and algae do not grow easily, and lime also has a sedimentation effect, which can sink some of the muddy objects in the water.

Methods of disinfection and insecticide in wells:

1. Direct chlorination disinfection: the time and frequency of disinfection should be determined according to the amount of water consumed and the time of carrying water.

2. Continuous chlorination and disinfection; with plastic bags, bamboo tubes, polyethylene.

Beverage bottles and other containers are filled with 250 grams or 500 grams of bleaching powder, mixed into a paste with a small amount of water, and tied with a buoy "wooden board or bamboo tube" so that the medicine bottle is located about 60 cm below the water surface. During use, care should be taken to prevent the bottle from coming to the surface, falling over and blocking the holes.

3. Pour in lime powder directly.

Then let it sit for a while, and you're good to go.

Benefits of well water:

1. Free of charge; 2. If there is no pollution source nearby, it is pure natural water.

Disadvantages of well water: 1. It has not been disinfected;

2. There may be factories nearby that illegally discharge pollutants underground;

3. Natural rainfall may also contain pollutants.

It can be drunk, quicklime has the effect of disinfection and sterilization, which can kill some microorganisms and insects in the well water, in addition, lime also has a precipitation effect, which has a certain effect on the impurities in the precipitated well water.

1.The addition of clear lime water to the rice shrimp is mainly to make the rice milk coagulate and smooth, increase the natural fragrance and sweetness of the rice shrimp, promote the richness of the taste, change the nature of the food, make it change from acidic food to alkaline food, and become a low-calorie healthy food.

2.Lime water also has the effect of disinfection and sterilization, as a safe and environmentally friendly low-cost food additive, there is no substitute at present.

3.Since lime water can be used as a food additive, it proves to be non-toxic.

How to tell if the well water meets the citation criteria.

1.Take well water, put it in the kettle and repeatedly boil it for cooling cycle operation, if there is a large amount of salt precipitation, the water quality mineral exceeds the standard, and it is not suitable for direct drinking;

2.Put the well water into an opaque dark container and let it stand, put it in the sun or under the light of a flashlight**, if you see a large number of chaotic suspended solids, the suspended solids in the well water exceed the standard, and it is not suitable for direct drinking;

3.If a large number of small fish are killed in large quantities, it can be determined that the water has been contaminated with toxic substances and is not consumed directly.

The inside of the well is sprinkled with quicklime.

After it is drinkable.

Because quicklime has the effect of disinfection and sterilization, it can kill some microorganisms and insects in the well water, and the folk cleaning of the well is sprinkled with quicklime. In addition, because quicklime has a sedimentation effect, it has a certain effect on the impurities in the precipitation well water.

Drinkable;Quicklime can kill bacteria and insects, and the cleaning of the wells by the people is sprinkled with quicklime.

Lime cannot be put in the well for disinfection, and lime is a toxic substance in the first place, so it cannot be put into the well for disinfection. Wells are generally disinfected with alum. Or peel it off with the prickly stem of a cactus and place it in water, which is able to make the water clear.

Lime is an air-hard inorganic cementitious material with calcium oxide as the main component. Lime is made of limestone, dolomite, chalk, shell and other products with high calcium carbonate content, calcined by 900 1100. Lime is the earliest cementitious material used by human beings.

Lime has a wide range of applications in civil engineering in Pulse Town, and can also be used in medicine in China. For this reason, the poems based on lime were handed down in ancient times, and they were chanted through the ages.

Summary. Answer: Hello dear After sprinkling lime in the well, can the water be drunk?How long does it take to use it?If you want to drink it, wait until 15 hours after purification. You can't drink it until then. The material is not completely precipitated, which is not good for the body.

After lime is sprinkled in the well, is the water drinkable?How long does it take to use it?

Answer: Hello kiss After sprinkling lime in the well, can the rest of the banquet be drunk with swimming water?How long does it take to use it?If you want to drink it, wait until 15 hours after purification. You can't drink it until you're buried. The material is not completely precipitated, which is not good for the body.

Or quicklime can be put into the well for a few days before the lime can be cleared in two days. The correct answer is that the well water in rural areas is not released at the same time, usually on the second day. to be able to quote.

Because at that time, the purpose of flying powder was to disinfect and eliminate all kinds of harmful microorganisms and toxic substances in the well. After a night of disinfection and precipitation. Then the water in the well can be used to drink the next day.

And it is also at the top of the well of addiction. It can be drunk after the next day.

After lime is sprinkled in the well, is the water drinkable?How long does it take to use it?

If lime is sprinkled in the well, the water is suitable for drinking, as lime can change the pH and taste of the water and may have a negative impact on human health. Lime-sprinkled well water should be left for at least a few days to give the lime enough time to settle to the bottom of the well. Then, you can use a hand pump or an electric pump to extract the water from the upper clean well to crack it.

If you need to drink well water, it is recommended that you first undergo a laboratory test to ensure that the water is safe.

After lime is sprinkled in the well, is the water drinkable?How long does it take to use it?

Hello, dear, after sprinkling lime in the well, it is not recommended to drink the water directly, and it is generally necessary to wait for a certain time. The specific time varies depending on the amount of lime used, the depth of the sock burning well, the volume of the well, and other factors, and generally requires 5-10 days of treatment. During the treatment process, the well water should be discharged several times until the discharged water body presents a clear, odorless state of shelter.

In addition, in order to ensure the health and safety of water quality, it is necessary to test the well water before drinking to ensure that the water quality is qualified. It is recommended that you consult your local water conservancy, environmental protection and other departments or professional organizations for more detailed treatment guidance before treating well water.

After the well has been disinfected, the time it takes to ensure that it is safe to drink may depend on the type of beard lime used and the specifics of the disinfection process. In general, after disinfecting the well, it is best to go through the following steps:

1.Fill the well: Dissolve a disinfectant (such as lime) in an appropriate amount of water and pour it into the well. Make sure the well is completely filled and leave it on for a while to ensure that the disinfectant is adequately distributed.

2.Wait for the time to do the sterilization: Depending on the type of lime and the concentration of the disinfectant, it is usually necessary to wait for a while to ensure that the disinfectant has a sufficient sterilization effect. The specific instructions for the disinfectant should provide a recommended waiting time.

3.Flush the well: After the waiting time is over, rinse the well with clean water to flush away residual disinfectant and impurities. Make sure the water flow for rinsing is clear and transparent.

In general, after performing well disinfection, one should wait at least 24 to 48 hours to ensure that the disinfectant is fully functional and that the disinfectant in the well has been diluted and the residue has been removed. During this time, direct drinking of water from wells should be avoided.

However, to ensure the safety of your water, please consult with your local health department or professional drinking water testing laboratory and follow their recommendations. They will be able to provide more accurate information to ensure that your drinking water is safe and reliable.