What kind of wall is used to paste the skin off the wall, and how to deal with the skin off the wall

Double-sided tape is not suitable, it is easy to stick the wall paint off, and the load-bearing is still very limited. I have an example in my house, and later I asked the workers to repair the paint.

No nails, just a hook with four steel needles at one end.

Method 1: Of course, the most feasible thing is nails, and I have asked many places that sell decorative paintings, including decoration companies. It is impossible for the wall to not be damaged at all.

However, it is best to consider the location and not change it easily, such as hanging the main place where the painting is not easy to move, you may as well use nails.

Method 2: Some non-main positions, paintings or decorations that will be changed frequently can be used in other methods, such as viscose, suction cups, etc.; If you want to be more beautiful, you can also use a special hook for hanging pictures without nails, there are several specifications, which can bear different weights, up to 20 catties. There are several very hard and fine steel needles on the hook, which are suitable for hard walls, and will not make a big hole in the wall, which is convenient for changing the painting, and does not affect the appearance when exposed.

Method 3: In addition, there is another method, which can often be seen in online searches**, that is, the painting is not hung, but placed in front of the wall, such as on the ground (suitable for larger paintings), set up a shelf on the wall, and the shelf can be placed on the shelf, which can be placed with paintings, books or decorations, and the shelf itself is also one of the decorations; Place paintings on the cabinet and other ways to place them.

Repair the wall: the effect of wall stickers to decorate the wall and repair the wall is the simplest in the decoration materials, the wall at home is damaged, and the previous decoration is dull, and it can be easily solved with wall stickers. Stickers on problematic walls can cover up ugliness and be beautiful; I don't like the appearance of decoration in the past, and I can't use the wall stickers in the large space of the house, such as the dining room, behind the sofa, in the hallway, etc., and the old look can be changed immediately.

1. Scrape the peeling part and scrape the putty:If the white wall or bare wall is partially bulging or slightly cracked and peeling, you can remove the problematic place, and smooth the edge of the shoveled part and scrape the putty again, apply primer, and then brush and repaint, but there may be a little color difference with the original wall.

2. Professional reinforcement treatment for the grassroots levelFor the case of severe local spalling, it is necessary to consider whether the wall base is not done at all. Remove the original wall to the base layer of the wall, repaint it with an interface agent or sealing primer, and then polish it according to the plaster leveling, paste the mesh cloth (reinforcement and crack prevention), and scrape the wall lining three times, and the quality of the entire base will be much better at this time.

Precautions for wall peeling.

Generally, there will be a process of foundation settlement in a new house for a year or two. During the settlement process, the wall stretches, which will cause wall cracks or wall peeling and cracking. In the process of foundation settlement, do not rush to partially repair the wall, it is best to wait for the settlement period of 1-2 years to gradually stabilize before starting to repair the wall.

When the developer delivers the house, the wall is smoothed with plain ash, and the workers must shovel off the plain ash of the base layer and re-brush the primer when painting the wall, and the small area of the skin is peeled and cracked. If the decoration is a latex paint, the secondary treatment is best to use the same way of brushing, so as to reduce the color difference between the local and the whole.

Avoid painting work in spring and summer when the humidity is high, if the construction is unavoidable, you can use the spray gun method to speed up the drying (it takes about seven days for the coating film to completely dry and achieve the best effect), and the original wall will be removed from the damp wall.

The above content refers to People's Daily Online-Four steps to get the wall renovation Experts recommend not turning on the air conditioner during construction.

The following methods are implemented for wall peeling: keep the wall dry, the wall foundation should be flat, and the batch should be solid, try not to use putty powder, because the putty powder is very permeable, it is a place where water is easy to visit, and the use of high-grade sealing and high adhesion paint to keep the wall airtight.

1. If there are cracks in a large area, chisel the bottom of the wall at the crack into a "U" shape, and the spacing of the "U" grooves is greater than 20cm, and the chiseled base is chiseled, and then the steel wire mesh is hung.

2. Lightweight partition wall, generally with nylon mesh cloth or kraft paper, the partition board itself is also prone to small cracks, so in order to minimize cracking in home decoration, it is best to paste a glass cloth or bean bag cloth, if it is a load-bearing wall or solid wall, the reason for cracking may be that the putty is too thick during construction or the interval is short, and the putty is not dry.

3. After the wall substrate is cleaned, a layer of good cloth, kraft paper or newspaper is pasted on the wall, and the tension of the fiber is used to ensure the integrity of the latex paint film. This method is relatively simple and easy, but the results are modest.

4. Remove the insulation board on the surface of the wall, or remove the cement wall, install a layer of gypsum board or "five-centimeter board" outside the insulation layer, and then make latex paint on it. This method can remove all the irregular cracks, and the cracks are generally the joints between the plates, which are easier to deal with. However, this method is expensive and difficult to construct.

5. Adopt elastic decorative materials. At present, there is a kind of "elastic putty" that can compensate for the problem of cracks in the walls to a certain extent. A certain wall paint can also play a role in covering small cracks in the wall.

However, these materials themselves are less "elastic" and do not work on walls with strong cracks.

6. Some consumers simply remove the insulation layer of the wall. Although this method can be used once and for all, it will reduce the thermal insulation and insulation performance of the wall, so it is not recommended to use it.

7. It can be renovated and decorated with wall clothing to prevent the wall from peeling and cracking.

8. Peeling and cracking of the small area of epidermis. Shovel off the peeled part and the surrounding wall skin, and fill it with the same color paint; If the decoration is brushed with latex paint, it is best to use the same method of brushing glue for the second treatment, which can reduce the color difference between the bureau and the whole.

Peeling of the wall not only affects the appearance, but also produces dust and hygiene problems. Generally, when solving the problem of peeling, it is best to solve it reasonably according to the situation! Scenario 1:

Remove the peeling part and re-scrape the putty; Remove the problematic area and smooth the edges of the removed part, then scrape the putty again, apply primer, and brush again, but there may be a little color difference from the original wall. Situation 2: Reinforcement of the base layer; If the local spalling is serious, the original wall will be removed to the wall base, repainted with an interface agent or sealing primer, and then leveled according to the plaster, pasted with mesh cloth (reinforced and cracked), and scraped the wall lining three times after grinding and smoothing, the quality of the entire base will be much better at this time.

Situation 3: Direct brushing and covering; If there is no chalking or falling off (indicating that the quality of the original putty layer is better), you can directly use fine sandpaper to polish and smooth it and brush it with a new primer and topcoat. Scenario 4:

Renovation; All the shoveling to the cement layer needs to be shoveled to the surface of the brick wall, and then the wall is fully constructed and renovated: leveling the wall - curing the base layer - brushing the interface agent - scraping the water-resistant putty three times - grinding the wall - applying the primer - applying the effect topcoat twice.

The wall is peeling off after a long time, and it should be renovated again In this way, you are no longer afraid of the wall peeling.

Method steps.

1 Step 1: Remove all blistering, peeling, and peeling parts, if it is caused by the putty on the wall base, you need to remove the putty.

2 Step 2: Completely remove the debris on the wall, you can clean it with sandpaper or rags 3 Step 3: Scrape the putty layer in batches, and the thickness of each batch scraping should not exceed 2mm to avoid cracking.

4 Step 4: Take an appropriate amount of wall paint, add the color paste that needs to be mixed and stir evenly5 Step 5: Evenly paint the paint to the wall, and paint it up and down in order to avoid brushing too thick at one time.

The peeling and blistering parts need to be shoveled off, and the putty layer at the base needs to be shoveled off; When the putty is scraped in batches, the thickness of a construction shall not exceed 2mm, and too thick will cause the putty to crack; The construction site should be dry and tidy; Evenly brushed to avoid excessive thickness and cracking; Clean the tools immediately after construction.

If a large area of peeling is generally a problem with the base layer, it is necessary to eradicate and redo the gypsum putty. Specific consultation is easy to turn over.

When pasting wallpaper, first of all, we should ensure that the wall must be smooth and clean, and the unevenness or cracks on the wall should be treated before the stress letter. If you don't deal with the wallpaper, it will not only be unsightly but also damage the wallpaper, before pasting the wallpaper, you should also ensure that the wall is dry, if the wall has been damp, you need to treat the wall dry.

What to pay attention to when sticking wallpaper on the wall.

1. Special handling of lead cover in special position. The special position refers to the power switch on the wall or something that cannot be moved, you can first cover the wallpaper on the wall, and then use a wooden handle brush to brush it flat, and then use a utility knife to draw diagonal cross lines on it, use a small scraper to resist the edge of the switch, and then use a utility knife to remove the excess part, so that it will be easy to complete.

2. Keep the wall flat. The unevenness of the wall is also the reason for the poor paste, so it is also very important to trim the wall, after trimming, then use a scraper to slowly level the wall, and the holes on the wall will also be affected, the wallpaper will be damaged if you are not careful, you can choose to fill it with putty, so that the wall will not be affected, and the wallpaper will be easy to paste.

3. Printing wallpaper connection processing. You should also pay attention to the printed texture about the printed wallpaper, otherwise the wallpaper will be very ugly. When encountering the connection of the printed wallpaper, cover it with the wallpaper first, find the same pattern at the junction of the printed wallpaper, and then overlap it slightly to find the same pattern connection, and then align it, use the scraper to resist the dust, and then cut off the overlapping part of the hair.

4. Brush wallpaper. The unevenness of the wallpaper will also make the effect of the paste not good, the wallpaper is leaned against the wall, with a wooden handle brush from the top down, from the corner to the inside, it will make the wallpaper paste very flat, in the process of pasting, you should also be careful, to avoid excessive force and damage to the wallpaper.

1. Wallpaper can not be pasted on the wall.

2. This is because when pasting wallpaper, it is necessary to ensure that the wall must be smooth and clean, and it is necessary to take care of the unevenness or cracks on the wall in advance.

3. If you don't deal with it, you will directly paste the wallpaper, not only not beautiful but also damage the wallpaper, before pasting the wallpaper, you should also ensure that the wall is dry, if the wall has been damp, the wall needs to be treated and dried.

If the wall is partially peeled, you only need to remove the peeled part and re-scrape the putty to repair it, but there may be color difference on the spot.

The phenomenon of wall peeling is very common, and wall peeling not only seriously affects the appearance, but also affects people's daily life, so the wall peeling needs to be dealt with in time. So how to deal with the peeling of the wall and what kind of material is good for the wall? If you want to know, you can take a look!

How to deal with the peeling of the wall.

1. Redo the wall.

If the peeling of the wall is serious, it should be that the wall base is not done well, and it is best to repaint the wall. The specific method is to remove the original wall surface to the wall base, and then repaint it with a sealing primer, and then level it with gypsum, and the whole wall is almost completed.

2. Remove the peeling wall.

How to deal with the peeling of the wall? You can use a putty knife to shovel out the bulging or peeling place, and then go to the market to buy the interface agent, dip the interface agent with a small roller, evenly apply it on the peeling place, and dry it naturally to make up for the peeling wall.

3. Be the first troublemaker.

You can do the first layer of the bottom on the wall, the specific method is: add an appropriate amount of white glue to the water, then add putty powder to stir, and use a batch knife to drape the interface agent coating, draped solid, draped flat. Because this is the first layer of the cover, the requirements do not need to be too strict, just smooth with the original good wall around it, and finally dry naturally.

4. Frost the wall with sandpaper.

In addition to repainting the wall peeling, you can also use frosted paper to smooth the wall, after the wall is naturally dried, use No. 50 sandpaper to smooth the peeling part of the wall, and then use No. 120 imported sandpaper to polish and smooth. After the wall is polished, you need to use an incandescent bulb to illuminate the concave and convex condition of the wall, if the bulge is more obvious, you can take a 3m long aluminum alloy frame to flatten the wall, and then according to the specific situation, cover the ash and polish. Which material is good for the wall.

1. Diginella mud.

Diatomaceous mud is familiar to everyone, it is the most commonly used material for walls, using diatomite as raw material, which can regulate indoor humidity, purify the air, deodorize, etc.

The texture of diatom mud is very delicate, and the wall should be treated flat during construction to play a better decorative effect, but the liquid finch-burning diatom mud material is not waterproof and cannot be wiped, so it should be very careful when taking care of it. 2. Artificial jade slabs.

Many families also like to use artificial jade slabs, which have good light transmission effect, small color difference, high plasticity, and are suitable for different shapes of walls. This decorative material is characterized by its high weight, is a natural stone, and is not easy to fall off and not fragile after construction, and is easy to transport.

3. Wood. Now wood is also one of the important interior decoration materials, such as walls, doors and windows, floors, etc. It is characterized by its hardness, good toughness, and good for shaping, but wood is easy to deform and has a limited service life.

My quote: The above is about how to deal with the peeling of the wall, which material is good for the wall, I hope it will be helpful to everyone! It is normal for the wall to peel, but in order to avoid the trouble of maintenance, you must choose good quality and durable materials.