How to replace the shell of the European version of the Little Turtle King electric car

1. If the area is large, first remove the periphery, and it can be found through observation that there is a big screw under the periphery, that is, under the headlights and the periphery.

There are also several screws underneath the faucet (in the direction facing the cushion).

2. Then use the prepared wrench.

Unscrew the middle screw on the headlight panel.

3. After unscrewing, take out the middle screw.

4. Then use a Phillips screwdriver instead to remove all the removable screws behind the panel.

5. After all the screws are removed, hold the top and slowly shake it and drag it back. Then don't mess around and put it away, take down the parts one by one, and put them neatly according to the position code, you know how to install a new one.

6. Now that the periphery is removed, we proceed to the next step, and the headlights will be completely exposed at this time, pinch the lampholder and twist it counterclockwise, and you will find that the lampholder and the periphery are separated, and you can remove it by holding both sides gently outward.

7. After dismantling, install the prepared shell step by step in reverse according to the order of disassembly, and tighten the screws.

Mine is the big turtle king generation, just bought a set of surgery and black outer part from the Internet, I took pictures clearly, and then sent it to the shopkeeper to let them match me with the right surgery, they mainly look at the position of the screw there to know what kind of surgery, the color, the normal male light black, the return rate is green, don't use beige and white, it's not dirty. If you want to be cooler, buy a few wind-blown lights, and it's still very windy to turn on at night. It's not bad to be bright black during the day, but in fact, it's not good to change to a shell that looks like something else, so you can use glass glue and put it together with super glue, which is very individual.

For example, the original ghost net surgery sawed off a hole in the big point, bought a fake skull, exposed the general glue, and fixed it. It's still very dazzling and beautiful.

If you replace the shell: first disassemble the large area (such as the large piece under the cushion, the screws are all loosened first, and then don't move and put it away, shake it slowly to see if you can take down the parts one by one, and put it neatly according to the position code, you know how to install a new one.) Remember that there is a buckle between them, don't pull hard, break it a little and see if you push it against the buckle.

The screws must be all aligned, or the buckle is easy to loosen. After changing the surgery, you must listen to the sound of loose plastic touching plastic, if there is the best solution, you can't solve the problem of glue, or so good-looking car has noise, and it is not good to be beautiful.

Hand hit hope.

The front face of the little turtle king electric car is fixed by screws, remove all the fixed rotten screws, and then pull forward to remove the front face, the specific operation steps are as follows:

1. Remove the lower fixing screws.

2. Remove the fixed screw of the left brake handle.

3. There is an identical fixing screw on the right side.

4. Push the front face forward.

5. At this time, the front face of the electric car was removed.

The following steps to remove the battery of the Little Turtle King electric vehicle:

1. Find the base battery box on the stool, remove the fixing screws on the battery box (the red place in the middle circle), and remove the cover plate upward.

2. Remove the connecting wires on the battery one by one. Use a screwdriver to loosen the screws and the connecting wire will fall off.

3. After removing the first set of batteries, pull the second group of batteries out of the battery box, and pull out in the direction indicated by the arrow on the way.

4. Remove the connection between the last battery and the electric vehicle and take out the battery.

1. First of all, in the small.

One can be seen in front of the DU panel of the BAI Turtle King electric car.

zhi screws, as shown in the following dao diagram: inside.

2. Then use a ready-capacity 5 Allen wrench to unscrew a screw on the headlight panel.

3. Take out the screws after unscrewing, as shown in the figure below

4. Then use a Phillips screwdriver to remove the screws behind the panel as shown in the figure below

5. After all the screws are removed, put your hands in front of the panel, as shown in the figure below

6. Press and hold both sides with your hands and gently break them out, and you can remove them, as shown in the figure below

About the replacement of the Komebai King headlights.

First remove the du

Periphery: The periphery is under the headlight, and the periphery is next to that, there is a screw right, remove the screw, there are a total of six screws under the faucet (facing the direction of the cushion), the top two screws, one left and one right, remove it, and then hold the headlight that piece up, and shake it if it can't be lifted.

Now the periphery is removed, let's proceed to the next step, by this time the headlights will be completely exposed, pinch the lamp holder and twist it counterclockwise, you will find that the lamp holder and the periphery are separated, at this time you are pinching the bulb and twisting it counterclockwise, you don't need to twist too much, and then a pull, the bulb will be separated from the lamp holder. The disassembly of the headlights is complete.

Now talking about the lampshade, it is not difficult to find that the lamp holder is fixed on both sides, and you can move up and down, of course, you may find that you can't move, that's because there is a small device to adjust the distance of the light is playing tricks, and you only need to tighten the two screws that fix this small device. The place where the lampshade is fixed is surrounded on three sides, there is no play at all, you can only start from the other side, you will find that there is a gap over there, yes is here, press the gap in the place where the lampshade is stuck with here, and I want to ,,, it is definitely not rotten, congratulations on taking off the lampshade now.

In addition, let's talk about the small adjustment device, there is a long screw on it, the tighter you tighten it, the higher the light lifts, and the looser the light, the lower the light! If you feel that your high beam is not far enough, you can try to tighten it, and if you don't do it, one of the two small holes under the headlights is used for this.

Remove the 3 screws, disassemble the panel here of the headlight, open the headlight assembly, pry open the lampshade, and you can change it, I made it like this!

According to my report, a lot of riders don't know much about cars. From time to time, a friend asks me: What should I do if the handlebar of the electric car is crooked?

I just have some opinions on this issue, so next, I will introduce my own opinions to you, I hope it will be helpful to you. The handlebars of electric vehicles interact with the front wheel forks, and the two are bolted. If the handlebar is crooked, just loosen the bolt slightly, adjust the handlebar of the car, and tighten the bolt later.

The handlebar of an electric vehicle is used to control the steering of an electric vehicle, and it can also control the turn signals and horns of an electric vehicle. The left handlebar can control the turn signal and horn of the electric vehicle, while the right handlebar is used to control the electric vehicle's power, headlights, and high and low speed switching. There may be some differences between different brands of electric vehicles.

Based on the number and structure of tires, electric vehicles can be divided into electric bicycles, electric motorcycles, electric unicycles, electric four-wheelers, electric tricycles, and electric scooters. The battery of an average electric vehicle can last for two to three days, and the battery of an electric vehicle is the most prone to failure.

Lead-acid batteries are generally used in the market. The production cost of these batteries is relatively low, and the performance of the batteries is relatively stable. However, the battery has a relatively short lifespan. Once there is a problem with the battery, there is no repair value and the battery needs to be replaced directly.

The other type is lithium-ion batteries, often known as lithium batteries, which have high production costs, high battery energy and good cycle characteristics. @2019

The battery of the little turtle king is under the bucket, you can see when you open the bucket, you need a 10 outer hexagonal sleeve to remove the bucket, 6 screws, welcome to love the electric motorcycle, I am the ** bar master.

Disassemble the bucket first and then remove the battery

How about the Aerospace Shendi electric car, the people who ask the question say yes, and senior technical experts will solve problems for you.

OK. The battery, in the case of an e-bike, is a relatively short-lived component that needs to be replaced or repaired many times; In addition, the design also takes into account that electric vehicles may not always be able to find a charging power source anytime and anywhere, and it is impossible to move the whole vehicle to the home. Therefore, the design is to ensure that it is easy to disassemble and install in the future.

The Little Turtle electric car is no exception.

Of course, it can be removed, and it is perfectly fine to take the battery pack out and take it back to your home to recharge.

Because the battery for electric vehicles is generally a VRLA battery, the charging voltage reaches a single at the end of the charge, and the oxygen is diffused to the negative electrode at the positive electrode of the battery, and the hydrogen produced by the negative electrode is combined into water, and the internal air pressure of the battery will also increase with the increase of the gas without compounding, until the pressure of the safety valve is reached, and the gas will be discharged.

Therefore, when charging at home, please stay away from high temperature sources, keep away from flammable and explosive materials, and keep ventilation, because the gas discharged from the open valve has hydrogen and will be slightly pungent. It is recommended to charge for a limited time, and must not be charged for a long time, the general charging time is 8 to 10 hours, not more than 12 hours.

Normally, it can be taken off, but in fact, the battery is more expensive, and many people take it to charge at home.

Most of them can be dismantled.

It depends on the make and model of your car.

The front face of the little turtle king electric car has a noisy pin fixing screw, but it is as follows:

1. Remove the lower fixing screws.

2. Remove the fixed screw of the left brake handle.

3. There is an identical fixing screw on the right side.

4. Collapse and grind forward to push the front face.

5. At this time, the front face of the electric car was removed. Regimental bumpers.