How to fold a thousand paper cranes? How to fold a thousand paper cranes?

The material that the thousand paper cranes need to prepare is a piece of cardboard.

Start by finding a square piece of paper.

It is then folded in half twice so that a cross appears in the middle.

Then, fold diagonally twice so that a rice shape appears in the middle.

Then, pull the lower right part of the upper half to the midline and fold up; The same is true for the lower left section.

Then, fold the right corner of the top half to the middle crease, and do the same for the left.

Subsequently, the top corners are folded off.

Then, put the creases of the two steps above.

Then, fold the bottom corner of the square up to the top corner along the crease from the previous step, while folding the two creases of the top half in the opposite direction to its natural fold.

Then, fold the outer edges of each of its two sides to the middle crease. Then, fold the right half of the piece to the left.

Then, fold the top tip of the top half up to the top corner, and do the same for the other side. Then, fold the right half to the left and repeat on the other side. In this way, the head and tail of the thousand paper cranes are hidden in the middle, and the wings are on both sides.

Then, fold off the wings on both sides perpendicular to the body, head, and tail. Then, fold off the tip of the head and separate the head from the tail.

1. Fold the diagonal corners of a square in half, fold them in half and then flatten them.

2. Fold both sides of the corner inward along the crease in the middle of each corner, and all four corners are.

To fold it. <>

3. Bend every four corners and open them, and fold each side along the crease, with the middle of the edge as the center, and the corner of each side as the vertex to fold it inward and below to fold it into the shape of a plate.

4. Fold the edges of the folded plate with the edges, and then flatten the transformer.

5. Open the outermost two corners to the other side.

6. Open the two sides of the left and right corners to both sides and press them flat.

7. Fold and flatten the two corners of the open along the center respectively to make the corners aligned with the corners.

8. Fold one of the two corners in the middle close to the lower end of the octagon, which is a thousand paper cranes.

of the tail. <>

9. Fold the other corner in the middle closer to the upper end, which is the head of the paper crane.

10. Fold the two sides of the outside to both sides and fold them into an arc, which is the wings of a thousand paper cranes.

11. Use a pen to draw eyes on both sides of the head of the crane.

Tools Ingredients: scissors, paper.

1. First of all, the paper of A4 should be cut, cut into a square, and the square should be folded along the two intermediate lines.

<>5. After the folding, the folded part.

<>7. The prototype of a thousand paper cranes comes out, and one end of it can be used as a head and one end as a tail.

The material you'll need is simple: a square piece of paper. If you want a good effect, you can use a piece of colored paper with a pattern.

Fold in half along the diagonal of the square piece of paper, and fold the other diagonal in half. Then open it completely, fold the two symmetrical pairs of opposite sides of the square together, and again. Now, four folds can be seen on the square paper, and the square is divided into eight pieces by these four lines.

Then, fold it horizontally in half along the original imprint, pinch the two upper corners, hold the two corners, and squeeze them inward so that the two corners meet. Then, press the paper flat so that it becomes a square that is a quarter of its original size. Casually side up, in the shape of a diamond.

Fold the left corner in half to the middle fold, and the right corner as well. Then, revert to the state of the previous step, and then lift the lower corner, so that the internal processing can be seen in the lift. Fold the left and right corners in half along the previous fold to make it a slender diamond shape.

After the front side is stacked, the back side is concocted in the same way. In this way, it becomes diamond-shaped. The longer side of the rhombus is divided into three layers, the second of which consists of two bifurcated triangles.

Spread both triangles apart and fold them in half so that the two corners at the bottom (the original bifurcated triangle) are inside. Let the top of the triangle stick out a little from the top, left and right. Then open the bottom two layers of triangles, and the appearance of a paper crane appears.

But that's not enough, you have to fold your head. Finally, fold the top corner of the small triangle exposed at one end down so that the tip of the triangle (head) is downward. In this way, the thousand paper cranes are folded.

Hello, the first step to fold a thousand paper cranes only needs to prepare a sufficient amount of square paper. 1.A square piece of paper is folded horizontally, vertically, and diagonally, leaving a "m" shaped crease to facilitate the manufacturing of the next process.

<> hello, can you give me a thumbs up if my suggestion is helpful to you? Thank you and have a good life.

Prepare the material: a square piece of paper.

1.Start by preparing a square piece of paper. Fold the top and bottom, left and right sides in half, leaving creases.

2.Turn over. The four corners are folded in half along the diagonal, forming a rice-shaped crease.

3.Pinch the two adjacent sides on the inside of the square crease and close them together.

4.Then pinch the two adjacent sides on the inside of the opposite square crease and close them together. This creates a double square.

5.Fold one side of the bifurcation of the double square toward the midline and align it.

6.The remaining three sides do the same, all folded towards the midline and aligned.

7.Fold the top corner along the sides of the two triangles.

<>9.Fold the lower corners and press the crease in the middle.

10.The back side is operated in the same way (first, the lower corner is folded to go up to the hole, and then the crease in the middle is pressed, and the four sides are pressed inward along the crease).

11.Swap the four sides of the two sides in pairs (front, one side of the left Natsa side is folded to the right, aligned. On the back, one side on the right side is folded to the left, aligned. ）

12.However, after the skillful shooting, the four sides on both sides are swapped in pairs.

13.Then fold a small part of the top corner inward to form the head and mouth of a thousand paper cranes. Adjust the shape of the wings a little, so that the beautiful thousand paper cranes are folded, and they are very beautiful.

When pulling the wings in the previous step, you don't need to push too hard, so as not to break the paper, you only need to pull the middle part up. Use different colors of paper, fold more, and put it at home, it looks very good.

The folding method of the thousand paper cranes is as follows:Prepare materials: a square piece of paper.

1. Prepare the origami, fold it in half along the midline, and then fold it diagonally.

2. Along the creases, fold the origami into a new square.

3. Restore to the original appearance.

4. Fold the four sides along the crease.

5. Fold down, and operate in the same way on both sides.

6. Fold a part of each side inward.

7. Fold inward into a small corner, and the head of the thousand paper cranes is completed.

8. Turn the wings of the paper crane outward, keep it horizontal, and the paper crane is folded.

A thousand paper cranes represent a wish to the person who was sent, and each thousand paper cranes carry a little wish, which eventually becomes a wish. The thousand paper cranes have beautiful legends and cultural heritage, and have become people's emotional sustenance. In the beginning, it was only for the sake of folding a thousand cranes to pray for a speedy recovery for those who were sick, and later there were also prayers for the success of something and folding a thousand paper cranes.

Origin of the name: There is a touching story about a thousand paper cranes: On January 7, 1943, a little girl named Sadako Sasaki was born in Hiroshima, Japan.

On August 6, 1945, an atomic bomb was dropped on Hiroshima, 1.7 kilometers away from Sadako's home**.

At that time, Sadako, who was only two years old, was thrown out of the house by the shock wave generated by **, but fortunately was not injured. Her mother then fled, taking her daughter with her, but was soon swept up in the ensuing black rain of radioactive fallout.

First, fold out a rice character, then fold it up and down, turn it over and fold it left and right. Repeat the work just now, cut the extra paper, and the paper crane will come out. The specific steps are as follows:

1. Lay the prepared square origami paper on the tabletop.

2. Fold in half along the two diagonals.

3. After folding in half, fold them in half along the center line of the square origami.

4. Fold the one just now in half to form a rice character.

5. At this time, fold the square origami into the following shape along the crease just folded.

6. Slightly open the shape you just folded, and fold out the inner side as shown in the figure below.

7. The other side is also the same as the previous step, and the completion is as shown in the following figure after folding.

8. At this time, the two sides of the opposite side are also folded out in the same way, and the following figure is completed after completion.

9. At this time, turn the orange to the right, as shown in the figure below.

10. Fold the side below without a break along the midline.

11. On the other side, the other round burning boy is also folded without breaks, and then our thousand paper crane wings are completed.

12. Fold one of the sharp corners of one of the triangles at the upper end inward, as shown in the figure below, at this time the mouth of the thousand paper cranes is completed, and the tail also appears. In this way, our paper crane is fully fingered.

Notes:The 10th-12th step of folding a thousand paper cranes needs to pay attention to the condition of the paper, do not force it to fold, it will make the paper crack!

1. Find a square piece of paper. If you're using square handmade paper, that's great. If you're using regular printer paper, simply fold the top corner horizontally so that the sides line up with the bottom edge of the paper, and the long side of the rectangle will grow into a segment.

Cut out the paper along the bottom edge and it becomes a square.

2. Fold the paper in half into a rectangle. Fold the top half of the paper so that the top and bottom edges of the paper are facing each other, and then press out the creases. Then the paper.

3. Fold in half in a different direction. Fold from right to left. Fold out the creases first, and then. You'll have a cross-shaped crease.

4. Origami along the diagonal. Fold the top right corner down to the bottom left corner. Fold out the creases, again. Fold the top left corner down to the bottom right corner again. Fold out the creases, again. At the end you should have a star-shaped crease.

5. Pull the lower right part of the top half to the midline. Fold up. The same is true for the lower left section. Your origami looks like a kite from above.

6. Fold the right corner of the top half to the middle crease. When you do this, the lower right side will be flush with the crease. The same is true on the left.

7. Fold the top corner down so that the crease is aligned with the horizontal line that was folded in the previous step.

8. Put the creases of the last three steps. Once you're done, you have a square with a face-down opening in the middle.

9. Fold the bottom corner of the square up along the horizontal crease that was folded in the previous step all the way to the top corner. Fold the two creases of the top half of the piece in the opposite direction to their natural folds, so that the creases are reversed. Pull the outer edge of the paper to the middle and flatten it.

This creates a diamond shape with one wing sticking out on the left and right.

10. Turn the paper over and repeat steps 6 to 9 on the other side.

11. Fold the outer edge of the diamond into the middle crease.

12. Fold the right half to the left. It's like flipping through a book. Then flip the whole origami over and follow step 11 on the other side. Then fold the right half to the left.

13. Fold the top tip of the top half of the piece up to the top corner. Flip it over and do the same on the other side.

14. Fold the right half of the slice to the left. Again, it's like turning the pages of a book. Flip it over and repeat. Now the head and tail of the crane are hidden in the middle, and the two sides are about to become wings.

15. Fold the wings perpendicular to the body, head, and tail. Fold off the tip of the head.

16.Pull out the head and tail so that they are in a line with the outer edges of the body.

17.Creates a three-dimensional effect. If you want to fold a three-dimensional finished product, you can pinch the opposite corner of the bottom of the body and gently pull it to create the desired three-dimensional effect.