How to tighten the neckline if the neckline is big, how to reduce the neckline if the round neckline

Method 1: 1. First use a needle and thread to sew the enlarged neckline around until the neckline is tightened to a suitable size; 2. Then put the iron 2-3cm through the neckline, and use steam to iron the neckline repeatedly. 3. After the ironing is cooled, remove the sewing thread, and then spread the clothes flat, and you can obviously find that the neckline has shrunk. Method 2:

1. Fold the neckline of the back piece inward, find the center line of the neckline of the back piece, and then fold it back, and then the pleat distance needs to shrink according to the size of the collar, so that the length of the two sides is the total length of the contraction; 2. After folding out the I-fold, use a needle and thread to stitch and fix the folded part. It can also be tightened without direct tightening, and only need to be covered by cloth strips to solve the problem of the neckline becoming larger. First, choose some strips of cloth of the same color according to the color of the clothes; Then cut into 3 symmetrical strips of cloth, not the same length; Start with the strip closest to the neck and work your way up to the shortest strip closest to the shoulders.

How to tighten the neckline if it is too large. Spare materials: tape measure, garment steamer or iron, needle, thread, scissors.

You can sew the neckline inward at the back of the clothes, slowly tighten the neckline while sewing, and then iron the neckline of the clothes with an iron, and then use scissors to remove the freshly sewn thread.

1. Measure the length of the neckline with a ruler and estimate how much you need to reduce the neckline.

2. Sew a circle on the neckline with a needle and thread, don't worry about leaving marks, the needle and thread are much thinner than the knitting thread of the sweater.

3. Then pull the thread a little and tighten the neckline.

4. If there is a garment steamer at home, use the garment steamer to start ironing on the shrinking neckline, if it is an iron, hold the iron 2-3 cm across the neckline, and use steam to iron it.

5. After scalding and waiting for it to cool, remove the thin wire.

6. After disassembling the line, spread it out flat, measure it with a ruler, the neckline is significantly reduced, and the elasticity of the sweater is restored! Loosening of cuffs, hems, etc., can also be treated in this way.

1. Tighten the enlarged neckline with a needle and thread, and receive the appropriate size of the collar. 2. Iron the neckline repeatedly with an iron. Finally, remove the stitches from the sewing and you're good to go.

3. If the deformation is serious and you are reluctant to throw it away, you can make some decorations at the collar and add a fake collar to remedy the deformed T-shirt. 1. First prepare a piece of cloth and a pair of scissors; 2. Cut a strip of cloth along the edge of the cloth with the same length as the round neck; 3. Smooth the cut cloth; 4. Then put the cloth strip edge to side against the round neckline neatly; 5. Then turn over the strips of cloth with the round neck; 6. Then sew it with a needle and thread along the lower end of the round neck, remember to sew the entire round neck and cloth strip in a clockwise direction; 7. Finally, the round neck and cloth strips are perfectly combined, which is not only beautiful, but also changes the original large round neck to a smaller one.

The neckline is too large and the small steps for the seam are as follows:Preparation of materials: clothes, marking chalk, needlework, etc.

1. First find out the size of the neckline rock branch that needs to be reduced to, and make a mark with marking chalk.

2. Then mark the third of the seam with chalk in the rough judgment of the neckline, and gently connect the two marks with chalk.

4. Then, start sewing from the middle of the shoulder, and the first stitch is pierced from the inside of the garment to the outside.

5. Then use the Tibetan needle method to sew from the middle of the garment to the front mark, and sew a triangular shape like this.

6. Finally, tighten from the end of the needle and thread, and the other side is the same as above, and the operation of reducing the neckline can be completed.

If the neckline is too large and the neckline is reduced, you can shrink the neckline with a transparent thread, re-weave the neckline, soak it in hot water, and cut off the old one and replace it with a new neckline.

Tools Ingredients: beef tendon thread, hot water, scissors, sweater.

1. Blanch the neckline with hot water.

Soak the neckline of the sweater in hot water, the hot water can make the sweater shrink, and the neckline can shrink a little by ironing the neckline.

2. Wear the thin beef tendon thread on the neckline.

Wear a thin beef tendon thread on the neckline of the sweater that has just been soaked in hot water, and use the transparent thread to shrink the neckline to the extent you want.

3. Re-weaving.

Remove the neckline and re-knit. When I was a child, sweaters were repaired to the neckline in this way.

4. Replace the neckline.

Replace the neckline, some bought sweaters, you can cut off the old neckline, buy a new neckline, sew it on the sweater, and replace the original neckline.

1. Use a ruler to measure the long grinding of the neckline and estimate how much you need to reduce the neckline.

2. Sew a circle on the neckline with a needle and thread, don't worry about leaving marks, the needle and thread are much thinner than the knitting thread of the sweater.

3. Then pull the thread a little and tighten the neckline.

4. If there is a hanging stool ironing machine at home, use the garment steamer to start ironing on the shrinking and smooth neckline, if it is an iron, hold the iron 2-3 cm apart from the neckline, and use steam to iron it.

5. After scalding and waiting for it to cool, remove the thin wire.

6. After disassembling the line, spread it out flat, measure it with a ruler, the neckline is significantly reduced, and the elasticity of the sweater is restored! Loosening of cuffs, hems, etc., can also be treated in this way.

The neckline is reduced and seamed as follows:Prepare tools: needle, BTG line, clothes.

<>4. After the needle is collected and the thread is drawn, it can be seen that the needle part has become the pattern shown in the figure below, and the neckline has been successfully reduced, realizing the change of the large neckline to a small neckline.