-
What are some tips? The floor has a wall paint on it, which can be removed with special tools such as a small shovel or in the liquid form of raw oil.
1. Remove the smooth ground with a small shovel.
If the ground is relatively smooth, you can soak it in tap water first, and after waiting for 30 minutes, the paint on the ground has gradually softened, and even some rolls have already been made.
2. The uneven ground can be wiped down with a wire brush.
If the paint surface is not large, you can sprinkle water first, soak it for more than 30 minutes, squat on the ground and wipe it with a wire brush, gently wipe it, and remove the paint immediately if you wipe it off, and the paint will be removed.
3. Remove with vehicle gasoline.
Everyone understands that car gasoline can remove paint, and it can be removed by splashing car gasoline on the paint and gently wiping it with rubber gloves.
4. Remove with edible olive oil.
Edible olive oil is a good product, if the total area of paint on the floor of the home is small, you can sprinkle some edible olive oil, soak it for 30 minutes, wipe it gently, and wash it with cold water.
5. Eliminate with mosquito repellent toilet water.
Sprinkle mosquito repellent toilet water on the painted side, soak it for 30 minutes, and wipe it gently, it will remove the paint very well, and it will continue to have the effect of killing germs, and it will continue to have an aromatic smell.
How to deal with concrete floor gaps:
1. Grouting method. If the ground is cracked, there is no hollow wall after inspection.
Dedelamination can be solved by grouting method, that is, the mixed mortar is poured into the gap and waits for it to be hard bottomed.
2. Negotiate with real estate dealers to solve the problem. If the ground is cracked and accompanied by the hollowing of the wall, according to China's norms and standards, it should be discussed with the real estate developer and let it be resolved.
The above is all my detailed introduction, I hope after reading this article, it will be helpful to you and solve the problem as soon as possible.
-
In this case, I think it should be cleaned with a steel wool ball, or you can find a small shovel to clean it, or you can use a knife to clean the latex paint on the ground.
-
I can choose a small spatula with steel wool, but I can also use olive oil or petrol, and of course toilet water will also play a good role.
-
Baking soda can be placed in water. Add some detergent and pour it on the concrete floor to wash it off with a brush or remove it with a small spatula. It can also be wiped off with a steel wool ball.
-
You can go to ** to buy some detergents that specifically remove latex paint, you can also choose some baking soda or toothpaste to apply to latex paint after about half an hour can be easily removed, you can buy some bubble water, brush with a brush, you can use steel wool and putty knives can be removed, you can also use sandpaper to grind off the latex paint, and then clean it with soapy water.
-
When cleaning, you need to prepare a wet rag, which should be prepared with laundry detergent or dish soap, and finally used for cleaning, or you can use rust to wipe it, and finally rinse it with water, or you can choose some stain remover, so that it can be removed, and the effect is still very good.
-
It can be removed with a small shovel, or with gasoline, with toilet water, with oil, or with steel wool.
-
Latex paint on the concrete floor can be removed using tools such as a small shovel or liquid oil.
1. Remove the smooth ground with a small shovel.
If the ground is relatively smooth, you can soak it in water first, wait for half an hour, the paint on the ground has begun to soften, and even have some curls, then you can use a small shovel to gently shovel, and the ground can be removed if it is smooth.
2. The unsmooth ground can be wiped off with a steel wool ball.
If the paint surface is not large, you can sprinkle water first, soak for more than half an hour, squat on the ground and wipe it with a steel wool ball, wipe it gently, and clean up the paint in time, which will remove the paint, and if there is still a residue, you can scrub it repeatedly to remove the paint.
3. Remove with gasoline.
Everyone knows that gasoline can remove paint, you can sprinkle gasoline on the paint, wear gloves and gently wipe it, and you can remove it.
4. Remove with olive oil.
Olive oil is a good thing, if the paint area on the ground at home is small, you can sprinkle some olive oil, soak it for half an hour, wipe it gently, and clear it with water.
5. Remove with toilet water.
Sprinkle the paint with toilet water, soak it for half an hour, and wipe it gently, it will remove the paint well, and it will also have the effect of killing bacteria, and there will be a fragrant smell.
How to deal with cracks in cement floors:
1. Grouting method. If there is no hollowing and delamination after the ground cracking inspection, it can be treated by grouting method, that is, the cement mortar is poured into the crack and waiting for it to harden naturally.
2. Negotiate with the developer. If the ground cracking is accompanied by the phenomenon of hollowing and delamination, according to the national norms and standards, the developer should be negotiated and let it be treated.
-
Paint falling on the concrete floor can be removed with soapy water, and it can be wiped off by following the steps of the method.
The first step is to make some soapy water.
The second step is to soak the painted area on the ground with soapy water for half an hour.
Step 3: Use a small spatula to remove the paint.
Fourth, use sandpaper to remove the relatively small paint.
Step 5: Dip a towel in some soapy water.
Step 6: Then wipe the floor with a towel and wipe the rest clean.
Step 7: Clear it again with a mop.
Step 8、Then wash the floor with clean water。
Step 9: Mop all the paint clean.
-
Kiss! Hello, happy to answer your <>
How to remove the latex paint sprayed on the cement floor: sprinkle some water on the ground with a wet rag or mop, wipe it several times on it, soak it with water, and then wipe it off. After wiping each time, wipe the rag or mop clean and then do the next time, and wipe it several times to wipe the ground clean.
Once the latex paint is dry, it will be very inefficient to soak it with water and wipe it directly with a rag or mop. To this end, it is suggested that: (1) if the ground is a smooth cement floor, directly use a small shovel like the following figure to clean it, and then use a mop to drag it a few times at the end; (2) If it is an unsmooth cement floor, you have to use steel wool balls and water to scrub it repeatedly; The better the latex paint is more difficult to clean up after drying, and the more water-mixed latex paint is more difficult to clean, so in the construction we will spread the tung on the ground and burn plastic film to protect it, if the ground is covered with latex paint in a large area, it is also particularly laborious to clean up, and there is a danger of scratching the ground more or less.
When you accidentally get latex paint on the ground, you should wipe off the wheel with a damp cloth as soon as possible, even if it is not particularly clean at that time, at least it also plays a dilution role, so that it will be much easier to clean up later. Hope mine can help you <>
Do you have any other questions?
1. Generally, the wall paint is water-based, so wipe it with a damp rag little by little, don't use banana water or the like to wipe it, and beware of wiping off the paint on the floor. >>>More
Latex paint. According to the coated object, it is divided into interior wall latex paint, etc.; According to the gloss effect, it is divided into matte and matte. >>>More
It's used to block dirt or add finish to the wall!
Exterior wall paint is not only colorful, but also its water resistance, pollution resistance and weather resistance are also very good, so now it is more and more liked by the majority of consumers. The construction process mainly includes the following processes: 1. Inspection and recording of the wall substrate; 2. Clean the wall foundation; 3. Deal with wall holes, cracks, etc.; 4. Scrape 1-2 layers of putty on the exterior wall according to the situation; 5. Roller coating alkali-resistant sealing primer; 6. Roller coating varnish; 7. Polishing corners and rough parts; 8. Spraying exterior wall paint; 9. Paste tape into grids at the elastic line part; 10. Elastic wire according to size requirements.
EraserChildren against the wall, most often used "".**"It's a pencil. If the pencil marks are not very deep, you can wipe them with a damp rag first, and then gently wipe them with an eraser, which can basically solve the marks left by the pencil. Of course, the role of toothpaste, needless to say, is known to everyone, it can be said to be a cleaning artifact, such as when cleaning some porcelain and tea stains, it will also have a good effect. >>>More