How to use dental strips and what are the precautions for using dental strips?

Keep your hands dry when using, tear open the bag, and remove the dental sticker.

And wipe the saliva on the surface of the teeth with a napkin.

Attach the gel surface along the gum to the surface of the tooth, fold the excess inward to attach to the back of the tooth, and then gently press it to fit the tooth completely.

Remove the strip after 30 to 60 minutes of use, no need to rinse your mouth.

The use of dental strips is very simple, just peel off the protective film and stick it to the teeth, the precautions are to stick the dental strip to the teeth, do not stick to the gums, and keep it flush with the root of the tooth.

First of all, you need to clean the teeth, then gently take out the toothstickers, and then put the gel side on the teeth, align them with the surface of the teeth, and stick them, generally for about 30 minutes.

After the gold tooth is torn off, it is attached to the tooth according to the direction and removed after a few minutes to make the tooth whiter, and it should not be used often, which will damage the tooth enamel to a certain extent.

Dental strips, commonly found in whitening strips, are an elastic gel-type film patch commonly used for teeth whitening, and a plastic sheet that needs to be removed from the protective gel-like layer. Dental strips are applied directly to the surface of the affected tooth.

When using dental strips, you should wash your teeth, and your teeth must be straightened and relatively neat before you can use dental strips.

1. Remove the tooth sticker from the hard plastic film, the long one is the top and the short one is the bottom. Some versions are the same length, so it doesn't matter.

2. The side with the gel is aimed at the tooth and pasted along the gum line. Adjust the strip with gentle pressure with your finger so that it fits perfectly to the surface of the tooth. Do not touch your gums.

3. Remove the strip from the tooth according to the corresponding time of different dental strips.

1. Remove the tooth sticker from the hard plastic film, the long one is the top and the short one is the bottom. Some versions are the same length, so it doesn't matter.

2. The side with the gel is aimed at the tooth and pasted along the gum line. Adjust the strip with gentle pressure with your finger so that it fits perfectly to the surface of the tooth. Do not touch your gums.

3. Remove the strip from the tooth according to the corresponding time of different dental strips.

1. First of all, tear off the sticker adhesive of the dental sticker.

2. Show as many teeth as possible, hold the two ends of the strip with your hands, and keep them parallel to the teeth.

3. Stick firmly on the teeth and smooth out the surface that is not neatly attached.

4. After pasting, fold the extra part into the mouth, and use the tooth strip twice a day for the upper and lower teeth.

5. After using the dental strip, remove the remaining dental strip gel on the teeth by rinsing your mouth.

It's simple! Stick the gel side of your teeth along the gum line! After attaching, press it with your fingers to make sure it is tightly attached.

Fold the excess part into the teeth, but be careful not to stick to the gums! It can be removed after 30 minutes. Personal advice is to use it once a day, no more than twice.

The effect of this kind of dental strip is quite long-lasting, you don't need to use a lot, don't use more than two boxes a year.