Can potassium permanganate be mixed with water to water flowers?

Potassium permanganate can be used to water flowers directlyUse its solution of different concentrations to control cataplexy, blight and downy mildew at the seedling stage of flowers.

Soft rot, wilt, root rot, virus disease and other diseases, the effect is very significant. At the same time,It contains two kinds of nutrients, manganese and potassium, which are essential for plants, which can promote plant growth and can be described as a medicine and fertilizer.

To control the amount of potassium permanganate during its use, potassium permanganate isStrong oxidizing agentFirst, avoid using stagnant water.

mineral water), sewage and hot water to prepare medicinal water; Second, the liquid medicine should be used with the preparation to prevent oxidation failure; The third is to prevent mixing with strong alkaline pesticides to avoid degradation and failure.

The drug is rich in sources, low cost, sold in pharmacies all over the world, easy to purchase, and safe for humans and animals when used, non-toxic, no residue on crops, no pesticide damage, no pollution to the environment. Therefore, potassium permanganate is a rare fungicide for vegetables and flowers, which is non-toxic, non-residue and pollution-free.

Potassium permanganate can be used to water flowers, but only in small amounts.

Potassium permanganate is mainly used in the production of chemicals and is widely used as an oxidizing agent, such as saccharin, vitamin C, isoniazid and benzoic acid.

It is used as a preservative, disinfectant, deodorant and antidote in medicine. In water purification and wastewater treatment, it is used as a water treatment agent to oxidize hydrogen sulfide, phenol, iron, manganese and organic, inorganic and other pollutants to control odor and decolorization.

Usually you can spray potassium dihydrogen phosphate to raise flowers, which can promote flowering, and many people use it in this way.

Potassium permanganate mixed with water to irrigate roots can ** flower wilt. If there is no disease, there is no need. Too high concentrations can damage plants and even die.

Flower potting soil can be disinfected with potassium permanganate, which kills and inhibits the growth of bacteria. The method of disinfection is also very simple, after putting potassium permanganate in water, fully stirred, diluted into 400 times the solution, you can spray and disinfect the soil for raising flowers, after spraying, it is best to cover the soil with plastic film, after a week of exposure, you can use to plant flowers.

Generally, only when it is necessary to kill some germs, potassium permanganate mixed with water will be used to water the flowers. But the concentration must be diluted, it can kill the microorganisms in the pot. It can prevent the harm of some soil microorganisms.

Potassium permanganate solution can be directly watered flowers, can prevent flower seedling blight, downy mildew, soft rot, wilt, root rot and other diseases, the effect is very significant, but potassium permanganate solution should pay attention to the concentration when watering, if the concentration is high, it is easy to cause soil manganese pollution, resulting in poor growth of flowers.

Benefits of watering with potassium permanganate solution.

When using potassium permanganate, we should pay attention to the concentration, at a lower solubility, the potassium and manganese elements in potassium permanganate can be absorbed and utilized by plants. However, if the concentration is too high, it is also easy to cause soil manganese pollution, resulting in poor plant growth. When using potassium permanganate spray, attention should be paid to stirring evenly, and spraying at about 9 a.m. or 4 p.m.

Note: Seedlings should be cleaned after spraying.

Potassium permanganate application scenarios: The specific application scenarios are usually as follows.

1. Transplanting piles, soaking potassium permanganate before preparing for planting, can avoid infection or decay of the pruned wound during transplanting after planting, and the sterilization effect is obvious.

2. For piles with soil balls or inconvenient soaking, potassium permanganate can be used to water the potting soil when planting, although the effect is worse than soaking, but it is always better than nothing.

3. Soak potassium permanganate when sowing or cuttings to avoid being infected by pathogens after planting and improve the survival rate of cuttings or cuttings.

4. Potassium permanganate can also be used for soil disinfection, which can basically completely remove hidden pests and bacteria in the soil, which is conducive to the better survival rate of raising flowers and trees.

5. Spraying potassium permanganate in the season of high incidence of pests and diseases can also have the effect of sterilizing plants, and even better than carbendazim and other drugs, which can prevent and control the occurrence of a variety of pests and diseases.

OK. Disinfectant effect of potassium permanganate.

1. Soil disinfection.

Potassium permanganate is often used by old drivers as a disinfection of potting soil. Generally speaking, potassium permanganate is configured to a concentration (the color is light purple), then poured into the potting soil, simmered with film for 2-3 days, and then the film is removed and the water is refilled. Doing so essentially guarantees that the eggs of germs and pests in the soil are completely eliminated.

2. Seed disinfection.

Some flowers that need to be sown with seeds can also be sown with potassium permanganate solution.

to disinfect. The concentration is generally around 1, and the method of disinfection is to soak the seeds with a solution. The specific soaking time depends on the variety of seeds.

3. Disinfection of cuttings.

One of the important conditions for the survival of cuttings is to avoid bacterial infection, so they are often disinfected after being cut from the mother tree, and the dilute concentration of potassium permanganate solution is a very suitable disinfectant, which can not only disinfect, but also promote rooting.

The role of disease control.

1. Prevention and control of cataplexy and blight.

Petunias. A bunch of red, marigolds.

After the emergence of seedlings, spray with 800 1000 times (first dilute and then thick) every 7 10 days. According to the test, potassium permanganate has a control effect of up to 97 on cataplexy at the seedling stage, and the effect is significantly better than carbendazim.

Dyszeb zinc, pentachloronitrobenzene, dixone and other pesticides.

2. Prevention and control of downy mildew.

Practice has proved that potassium permanganate has a good effect in the control of plant downy mildew, which is significantly better than chlorothalonil.

Pesticides such as zeb. Such as melon leaf chrysanthemum.

After the emergence of seedlings, 2 leaves and 1 heart to before flowering, spray with potassium permanganate 800 600 times, 5 7 days 1 time, spray 4 times in a row, can effectively prevent the occurrence of downy mildew. If there is a central diseased plant, spray it 3 times with 600 times of potassium permanganate, with an interval of 5 days, which has a good control effect on downy mildew.

Potassium permanganate. It is a strong oxidizing agent.

Soluble in water, degradable and not easy to remain, but the sterilization effect is very short, after lasting 2 hours, the effect will gradually decrease, so it should be used with the mix.

For disinfection of plants, the concentration needs to be controlled within the concentration to avoid pesticide damage, and low doses can be used to disinfect hydroponic plants.

If you are not able to grasp the correct concentration for the time being, it is recommended to adjust the water to a slight discoloration.

Potassium permanganate can only inhibit bacteria and does not have an insecticidal effect.

Potassium permanganate is used to disinfect and sterilize plants, and the general ratio is: the ratio of potassium permanganate to water is 1:1000, that is, a portion of potassium permanganate can be diluted with 1,000 parts of water.

OK. When watering flowers, the concentration should be strictly controlled, and the total concentration should be about one percent. The best way is to apply it to the soil, and the fertilizer utilization rate is higher.

Some fertilizers in nitrogen, phosphorus and potassium fertilizers are divided into acid and alkali, and can be mixed as long as there is no acid-base reaction. For example, diammonium and superphosphate are both phosphate fertilizers, but diammonium is alkaline, and phosphate fertilizers are acidic; Another example is that urea is nitrogen fertilizer alkaline, ammonium is acidic, and urea will tide after a long time. As long as it is possible to fertilize immediately after mixing, it is not good to use it after leaving it for a long time after mixing.

These three fertilizers can be mixed with water at the same time to water the flowers, but the concentration should be strictly controlled, and the total concentration is about one percent safe. The best way is to apply it to the soil, and the fertilizer utilization rate is higher.

<>1. Potassium permanganate.

Water can be used to water flowers, but the concentration should not be too high, reasonable use can prevent flower diseases, and it contains manganese and potassium.

It can also promote its growth.

2. When using potassium permanganate, it is necessary to use 30 warm water, do not use too high water temperature, and water it in time after preparing the solution, do not keep it for too long, it will be invalid after more than 2 hours, so it should be used as soon as possible after preparation, and it should be used with the mixture.

Potassium permanganate solution can be directly watered flowers, can prevent flower seedling blight, downy mildew, soft rot, wilt, root rot and other diseases, the effect is very significant, but potassium permanganate solution should pay attention to the concentration when watering, if the concentration is high, it is easy to cause soil manganese pollution, resulting in poor growth of flowers.

Potassium permanganate directly digging the hood and watering the flowers.

Potassium permanganate solution can be directly watered flowers, can prevent flower seedling blight, downy mildew, soft rot, wilt, root rot and other diseases, the effect is very significant, but potassium permanganate solution should pay attention to the concentration when watering, if the concentration is high, it is easy to cause soil manganese pollution, resulting in poor growth of flowers.

Pros and cons of watering flowers with potassium permanganate solution.

Potassium permanganate solution can kill a large number of algae, microorganisms and most of the bacteria, the most important role of the flowers is disinfection, especially when transplanting or when it is necessary to prevent some pests and diseases, the use of high manganese potassium will have a better effect.

In addition, potassium and manganese in potassium permanganate solution can be absorbed and utilized by flowers, and potassium permanganate solution is one of the strongest oxidants, and too high a concentration will cause flowers to die.

Potassium permanganate watering method.

In the spring and autumn of high incidence of pests and diseases, most of them are precautionary measures, during this period can also use potassium permanganate solution to spray flowers, for flowers that already have pests and diseases, you can spray potassium permanganate solution every 7 days or so, about 3 times in a row.