Is it cost effective to decorate with wallpaper or scratch white?

Personally, I think it's cost-effective. Because decoration is a large-area job, scraping is more cost-effective and cheaper.

It's a little more cost-effective to stick wallpaper. Because the wallpapers on the market are very cheap now. And there are many colors, which are very beautiful.

Considering the use function: the wallpaper is more beautiful, the pattern is rich, the color is more, and the style is a lot. However, the corners of the wallpaper will be warped after a long time, which will affect the appearance, and the poor quality wallpaper will also be yellowed; The paint is easy to paint, the color selection is calm, the degree of environmental protection is high, it is suitable for large-area painting, and it saves labor and time;

[Calculate how much it will cost you to renovate your home].

In the process of home decoration, many people will be entangled in whether to scrape putty powder or wallpaper, recently a friend asked, scrape the white and wallpaper which is cheaper, today will be answered for you, want to know friends may wish to take a look at it!

First, which is cheaper to scratch the big white or wallpaper.

This is not comparable, because wallpaper and latex paint are divided into different grades of high, medium and low, and the brands are different. Some people will buy wallpaper, so the cost will be cheaper, and some people will buy better quality wallpaper in order to prevent the wallpaper from becoming moldy and cracked, which is naturally higher, so it is necessary to ask which is cheaper, or according to your own choice.

Second, what is the construction process of scraping Dabai.

1. First of all, remove the original big white, clean the interface, and then brush the wall and fix the wall chain.

2. Check whether there are gaps in the wall that needs to be scraped putty, if there are gaps, you need to fill the gaps with plaster first, and then brush white latex and glue bandages.

3. When scraping the plaster, you can't scrape the white directly, the difference between the gypsum and the white is still very big, and the gypsum is important to paste and repair the places that need to be filled.

4. When scraping the big white at least twice, after the big white is completed, it should be ventilated in time, not stuffy, if the wind outside is too strong, the window can be opened and closed for a while.

5. After the white is completely dry, you need to use sandpaper to polish. Grind the scraper prints, daozi, purlins, small stalks, and small bags left when scraping putty.

6. Do a good job of protection to avoid latex paint from being stained in other places and not easy to remove.

7. Finally, it is to brush latex paint.

Summary: The above is for everyone to share the shaved white and wallpaper which is cheap and what is the construction process of shaving white, I believe you have a corresponding understanding after reading the above sharing, I hope the above sharing can help you, if you need to learn more about relevant information, please continue to pay attention to Qeeka Home**, will answer for you one by one.

Enter the area and get the decoration for free**].

The interior has been whitewashed with latex paint.

After that, you can't paste the wallpaper directly. If you have already brushed latex paint, you need to polish the wall with sandpaper 2-3 times before pasting the wallpaper, polish off the latex paint of the base layer, and then brush a layer of base film.

Latex paint is water-based glue, when paving wallpaper, a layer of wallpaper glue will be brushed at the bottom, and the glue also contains water. If the latex paint wall is used for too long, the wall itself is slightly dry and cracked, and the special glue for wallpaper will stick the wall skin of the latex paint wall, so that the wallpaper is not firm.

Before the wall of the room is pasted with wallpaper, the first thing is to paint white, only by painting white can remove excess dust and particles in the room, so as to make the wall smoother and make the wallpaper more solid and firm. The process of professional wallpaper is first to clean, then fill in the gaps, then use sandpaper to sand, then brush the primer, and then draw the wall to paste the wallpaper.

The white wall is not sticky to the wallpaper, because after the wall is painted with lime mortar, after drying, it is lumpy, but after a certain period of time, by the action of carbon dioxide and water in the air, it will produce powdery things (caCO3), this thing is not sticky, it will stick to the hand when rubbed by hand, if the wallpaper is pasted on such a material, with the drying and shrinking of the wallpaper glue, it will not take long for the wallpaper to warp.

Therefore, it is necessary to shovel off the lime wall and use putty to base and level. Because the wall treated with putty powder or putty paste is still relatively prone to cracks;

Now, better wall lining has been recognized by many people, wall lining has more advantages than putty and is widely used, in the past to paint white latex before pasting wallpaper, but because of the poor environmental protection of white latex, now it is not used, basically a layer of base film, because if the wallpaper is directly pasted, the adhesive is very strong, and the direct paste may pull off the base layer of the wall;

If you brush a layer of base film (or also called wallpaper companion), the base film can seal the wall, waterproof and moisture-proof, increase the adhesion between the wall and the wallpaper, and wait a day after brushing before pasting the wallpaper.

Now there are some wallpaper glue already with the base film component, so there is no need to brush the base film alone, the putty is dry, and the wallpaper glue can be directly pasted with wallpaper.

The most important thing before sticking wallpaper is.

treatment of the wall.

1.In principle, the wall surface can be pasted when it is flat and dry.

2.Cement and brick wallpaper: it is relatively flat, flattened with putty, and brushed with a thin layer of varnish can be pasted with wallpaper.

3.Wallpaper on plasterboard, plywood and blockboard: there are seams, which need to be patched before leveling.

Putty for joint repair: as long as more white glue (vinyl acetate resin) is added, the seam will be firm and will not crack.

Putty for leveling: just add a small amount of white glue for sanding.

4.Gypsum powder and white glue replace putty for leveling, which can speed up drying and shorten construction time.

5.Wallpaper on the wall: that is, if there is an unstable powder on the wall, it should be sanded to remove, leveled, and brushed with the base film before the wallpaper can be pasted.

Wallpaper on the bare wall: that is, the wall is very smooth (such as the painted wall), not easy to absorb glue, not easy to dry, and the adhesion force will decrease, so it is necessary to sandwork before sticking wallpaper.

6.Paint wallpaper: Paint wall is very suitable for wallpaper, but you need to do a good job of sanding and then painting the wallpaper base film before construction. The wall pretreatment of wallpaper is actually about the same as the wall pretreatment of brushing.

7.Before construction, the wall should be brushed with base film. The purpose of brushing the base film is to solidify and protect the surface of the putty, and it can also strengthen the waterproof and mildew-proof function of the bottom of the wall, but it can only be painted when the putty is completely dry. (The base film is an environmentally friendly product, easy to dry, and an alternative to traditional varnishes).

8.Any wallpaper should not be soaked in water.

Wallpaper has certain requirements for the wall, and it must be done at the grassroots level.

The premise of sticking wallpaper is that the wall requirements are to scrape 2 or 3 times putty and leveling, that is to say, only the base layer of the wall is putty to ensure the construction quality and service life of the wallpaper.