What s wrong with the white bubbles on the Milanese leaf

There are many reasons for the appearance of white spots on Milanese leaves. It may be infected with white spot or algal spot, first remove the diseased leaves, and then spray the agent according to **. It may also be infected with scale insects, aphids and other insect pests, you can make your own solution to spray first, or you can use phosphorus, Guoguang scale and other agents to spray continuously.

It may also be that there is too much fertilizer, and it is necessary to insist on thin fertilizer and frequent application, and once fertilizer damage occurs, it can be diluted by watering.

First, the impact of the disease.

Cause: The appearance of small white spots on the leaves of Milan may be infected with white spot or algal spot, both of which can affect the plant, resulting in small white spots and white spots on the leaves, as well as other healthy leaves.

Solution: After discovering that Milan is infected, first remove the diseased leaves to prevent infection with other healthy leaves, and then spray the pesticide ** according to **.

2. Infection with insect pests.

Causes: In addition to infectious diseases, it may also be infected with insect pests, such as scale insects and aphids, which will accumulate on the leaves in large quantities and suck the sap of the leaves, resulting in white spots on the leaves.

Solution: Scale insects are more difficult to treat, you can first make your own solution, such as washing powder diluted with water, diluted with wind oil essence with water, etc., prepared and sprayed on the leaves. If the self-made agent does not work, you can also use pesticides such as phosphorus and Guoguang scale, and spray it several times in a row.

3. Excessive fertilization.

Reason: Small white spots appear on the leaves of Milan, it may also be a problem with maintenance, if too much fertilizer is applied, a large number of accumulations will accumulate in the roots, and the roots will not be able to absorb normally, which will also cause white spots to appear on the leaves.

Solution: Fertilizer can be applied according to the growth and growth period, adhere to thin fertilizer diligently, once fertilizer damage occurs, you can water to dilute.

If you want to avoid the Milanese flower growing small white spots, you should maintain it in a more ventilated place, prune its branches and leaves in time to make its permeability better, and maintain it according to its growth habits according to the correct maintenance method, so that there will be no small white spots in the process of Milanese flower growth.

Most of them are insect pests, it is best to find diseased leaves and branches, to cut them in time, and improve ventilation conditions, after cutting for a period of time to observe whether there is a spread of disease, and then make plans.

It may be that the plant suffers from algal spot, when Milan is infected with algal spot, it is necessary to remove the diseased leaves in time, and move the plant to a well-ventilated and sunny location for maintenance, or it may be that powdery mildew causes white spots on the leaves of the plant, you can use a rag dipped in white vinegar, gently wipe the leaves, and then put the plant in a ventilated and sunny position to dry.

Milanese seedlings are more shade-tolerant when they are young, and prefer sunlight when they grow up; Prefer warm, humid climates and are afraid of cold; It is suitable for growing in fertile, loose, humus-rich slightly acidic sandy soils. Milan is very sensitive to low temperatures, and a short period of sub-zero temperatures can cause plant death.

Precautions for planting in Milan2. Light: Milan should be properly shaded in the seedling stage, and it should be fully exposed to light when it grows up, usually planted in the sun, and can be placed on the balcony if it is raised, so that it can fully receive light. If there is not enough light, the plant will grow and flower, which will also affect its flowering.

However, it is necessary to avoid being exposed to the sun in summer, so as not to dry up the leaves without water, which is not conducive to the development of plants.

The appearance of dense yellow spots on the leaves of Milanese flowers may be the result of disease or environmental factors. Here are some common causes and solutions:

Pests: Many insects, such as aphids, powderworms, etc., can cause yellow spots to appear on the leaves of Milanese flowers. Effective pesticides can be used to control pests.

Yellowing: Yellow spots on the leaves of Milanese flowers can also be a symptom of yellowing. The disease is caused by a virus and can be treated with specific antiviral agents**.

Environmental factors: Environmental factors such as lack of oxygen, excessive sunlight, dryness, high temperatures, etc., may also cause yellow spots to appear on the leaves of Milanese flowers. The situation can be improved by providing the plants with appropriate environmental conditions.

Lost nutrients: Lack of essential nutrients such as nitrogen, phosphorus, potassium, etc. may also lead to yellowing of Milanese flower leaves. The problem can be solved by supplementing the plants with the appropriate nutrients.

In order to maximize the health of Milanese flowers, it is best to seek help from professional Kirinaka personnel to determine the cause and take appropriate measures. Proper management practices, such as following proper irrigation practices, proper fertilization, disease control and control of environmental factors, can help to maintain the health of Milanese flowers. In addition, some precautions can also be taken when planting Milanese flowers to reduce the impact of diseases and environmental factors on the plants.

For example: Keep it clean: Before planting Milanese flowers, make sure to clean up around the plant to reduce the breeding of pests and viruses.

Choose the right soil: Milanese flowers need the right soil conditions to grow. Therefore, fertile, well-drained soil should be chosen when planting.

Adequate water: Milanese flowers need plenty of water to grow. Therefore, it is important to water the plants frequently to ensure that the root system does not dry out.

Avoid excessive sunlight: Milanese flowers are susceptible to excessive sunlight. Therefore, it is important to choose the appropriate plant location to ensure that the plant is not affected by excessive sunlight.

By following these steps, you can ensure that your Milanese flowers receive the best growing conditions to maintain their health and reduce the appearance of yellow spots.

Hello. There are several reasons for the white leaves of Milan that you mentioned: algal spot disease. This is usually the case in poorly ventilated environments. Two: powdery mildew. Generally, it is easy to have this situation in a humid environment, and the third is that there are aphids on the leaves of Milan.

This is a scale worm.

There is a layer of wax on the outside of this scale insect to protect them, and it is difficult for the agent to penetrate into it, and it is difficult to prevent and control. They attach to leaves and branches to suck the sap of plants, resulting in poor flower growth and a less ornamental appearance of flowers.

So how to control scale insects? There are more insects in the picture, which are more serious, and can be controlled according to the following methods:

Mix 500 parts alcohol with water, then use it to rinse the branches and leaves;

2. Rinse with water after 10 minutes;

3. Finally, use 1 ml of Qianbaiji Ruili mixed with 500 ml of water, spray on the branches and leaves, spray until the water drops, and then pour the remaining liquid medicine into the soil.

Do the above every 5-7 days, 3 times in a row, and the scale worm will die.

The above is this time, flower friends have other questions, you can send a private message in the background, and Qianbaiji will do its best to answer for you.

The white spots on the leaves of Milan are pathogens that produce spore-borne infections. Therefore, the diseased branches and leaves should be cut off as soon as possible, and it is best to burn them. Avoid the residue of germs, which can lead to secondary **.

The main cause of algal spot disease is poor ventilation. It is most likely to occur in Milan where indoor farming occurs, so it is necessary to strengthen air circulation. The first is to change the growing environment and place it on the balcony or windowsill to avoid being too close to other plants.

The second is to prune the branches and leaves that are too dense to ensure that the inside is well ventilated. At the same time, dampness is also the key to the parasitism of germs, so it is necessary to loosen the soil properly, or put desiccant in the room to reduce the humidity.

In the early stage of the appearance of vitiligo, it can be treated with Bordeaux liquid or stone sulfur mixture. Drug spraying has certain limitations, generally only spraying to see the white patches, but there are some transmission of tiny germs that cannot be seen. If the condition is severe, it will only treat the symptoms but not the root cause, and it will be a second time.

When watering, care should be taken not to let the soil get too moist, which can cause the growth of germs. At the same time, fertilization should also be balanced, and organic fertilizer can effectively improve the disease resistance of plants. Don't be biased in applying phosphate fertilizers, focusing only on its flowering and neglecting its health.

1. Prune off diseased leaves.

White spots on Milan leaves are a pathogen that can produce spore-borne infections. Therefore, diseased branches and leaves should be cut off as soon as possible, preferably by burning. Avoid residual germs that can lead to secondary **.

2. Ventilation and humidity reduction.

The main cause of algal spot disease is poor ventilation. Indoor farming is most likely to occur in Milan, so it is necessary to strengthen air circulation. 1. Change the growth environment, put it on the balcony or windowsill, and avoid getting too close to other plants.

Secondly, prune the branches and foliage that are too dense to ensure good internal ventilation. At the same time, humidity is also the key to pathogen parasitism. It is necessary to loosen the soil properly or put desiccant in the room to reduce the humidity.

Stove envy. 3. Drug prevention and treatment.

In the early stage of vitiligo, Bordeaux liquid or stone sulfur mixture can be used for prevention and control. Drug spraying has certain limitations. Generally, it can only be sprayed on the white patches that are seen, but some of the tiny germs that spread cannot be seen. If the condition is severe, it will only treat the symptoms but not the root cause, and it will be ** again.

Fourth, water and fertilizer control.

Be careful not to let the soil get too wet when watering, as this will cause the growth of germs. At the same time, fertilization should be balanced, and organic fertilizer can have a hidden effect to improve the disease resistance of plants. Don't apply phosphate fertilizer, only focus on its flowering, but ignore its health.