Can the branches of the Fortune Tree be propagated? Can it be planted?

The branches cut off by the fortune tree can be used for cuttings propagation, the cut branches only need to be about a year old, the branches used for the cuttings of the fortune tree are best to choose the current year's branches on the healthy mother plant, too tender, too old are not good, it is best to choose semi-lignified branches, such branches cuttings have a relatively high survival rate. Then it is easy to survive, 10 15 cm or so branches are fine, it is best to cultivate roots in the coarse sand first, coarse sand cultivation branches rooting is extremely easy, look at the following effect, almost 100%. Take care to keep the river sand slightly moist, and the temperature is between 20 and 30 degrees.

Cuttings propagate fortune trees.

, use eight parts of pastoral soil and two parts of river sand.

Mix one part mushroom puree and one part farm manure to prepare the base soil, and select the well-growing branches from the robust mother plant, cut them into 10 cm segments, and keep the top young leaves, and cut off the rest of the leaves.

Disinfection and sterilization. Before cutting the fortune tree, the base soil and cuttings should be disinfected. First, the soil is laid flat on a sunny concrete floor and left to dry for three days to destroy the germs and eggs, and then the cuttings are soaked in carbendazim.

Soak in the medicine for 10 minutes, then take it out, and put it in a cool place to dry for later use.

Cuttings method. In the process of cutting the fortune tree, it is necessary to apply mud to the bottom of the cuttings, wait for the mud to dry thoroughly, then insert it into the soft base soil, and press the soil of the roots with your fingers, and then pour water into the potting soil once, after moistening all the soil, put the fortune tree in an environment with a temperature of about 20 degrees, and wait for the branches to take root.

Under normal circumstances, the branches of the fortune tree cannot be planted alone, because such branches have low biological activity, so they cannot meet the scientific, planting requirements and effects, so it is not recommended to do so.

The strips of the fortune tree can be propagated, that is, they can be inserted directly into the soil and can survive.

It can be propagated by cuttings, 1Cuttings can be taken in May and June to take sprouting branches as cuttings; 2.Cut into sand or rocks, pay attention to shade, moisturize, and take root in about a month.

Rice water can not be directly watered flowers, rice water is weak alkaline water, direct watering will cause flowers to wither, the next time the rice water will be dried for two weeks and then used as fertilizer.

The branches of the Fortune Tree can be taken for propagation.

Yes, it can take root. 1. The cut branches only need to be about a year old, then it is easy to survive, 10 15 cm or so branches can be, it is best to cultivate roots in the coarse sand first, coarse sand cultivation branches rooting is extremely easy to get, look at the following effect, almost 100%. Take care to keep the river sand slightly moist, and the temperature is between 20 and 30 degrees.

Yes, it can take root.

1. The cut branches only need to be about a year old, then it is easy to survive, 10 15 cm or so branches can be, it is best to cultivate roots in the coarse sand first, coarse sand cultivation branches rooting is extremely easy to get, look at the following effect, almost 100%.

Take care to keep the river sand slightly moist, and the temperature is between 20 and 30 degrees.

Of course, hydroponic propagation can also be carried out, but it will be a little slower, and the leaves can not be wet, and the weak branches are better not to be wet, and the branches can be mated with pebbles, and the water should not be too much, and there are containers 2 3.

Change the water every 3 days before it takes root, preferably rainwater, purified water, or tap water after two days.

2. Conditions for rooting.

Note that the incision is complete, you can soak it in Bika rooting agent or potassium permanganate easily, sterilization and disinfection are also necessary, propagation hydroponic rot.

The environment should be ventilated, brightly lit, and of course the most important thing is the temperature, which is more suitable between 20 and 30 degrees. (The hydroponic fortune tree in the picture above has a white root system, so it's not rotten).

3. Cultivate small skills.

The branches do not need to be soaked in water too much, it is best to have something to support, let the stem contact the water about 5 cm, soak too much and it will be easy to rot. It generally takes about 20-30 days to start taking root and germinating.

The survival rate of cuttings of the fortune tree is greatly improved in spring and summer, and it is best to prune the branches that need to be cut in these two seasons. Choose the kind of semi-lignified branches for cuttings, which is better if it is on the main trunk branches. After cuttings, leave them for half a day to allow the wound of the cuttings to heal.

In order to avoid the water dispersion too quickly, you can also properly remove a few leaves, and you can take cuttings.

Do a good job of disinfection and sterilization of the substrate, but pay attention to the standardized operation, so as to better root, improve the survival rate of cuttings, and have been rooting agent treatment measures before branch cuttings.

Let's see what others have to say.

Hello friends, the fortune tree can cut off its branches, and then cuttings, this can be rooted, cuttings and rooting is still very easy, to sign and insert in the sand treatment, so it is better.

No.

The fortune tree itself is extremely difficult to plant, and if the cuttings are in the middle, they will basically not take root!

Yes, you can.

If the note of the fortune tree is more than two years old, it is fine. It can take root, but the survival rate is higher with rooting powder. You should know the method, so I won't talk about it.

The branches cut off by the Fortune Tree can be cut alive.

August cuttings.

Choosing the right time for cuttings is the first step in how to cut the branches, and it is also related to the survival rate of cuttings. Generally, the fortune tree is suitable for cuttings in May and August every year, and the climatic conditions and temperature at this time are more suitable for the growth of cuttings.

2. Prepare potting soil.

Fortune trees like to grow in loose and breathable potting soil, after knowing the growth habits of fortune trees, it is not difficult for us to know the answer to the question of is fortune trees easy to plant. Therefore, when choosing a substrate for cuttings, you can use coarse sand, vermiculite, and perlite according to 6:3:

The ratio of 1 is mixed evenly and set aside.

3. Select a branch.

Many flower friends fail to take cuttings in the selection of branches. It is best not to choose fresh shoots cuttings, it is suitable to choose the branches of the Fortune Tree potted spike when the semi-lignified branches, the length of the interception is about 7cm, and the lower part of the incision is obliquely cut to keep the incision smooth and free of cracks, and the disease prevention and control is air-dried in a cool and ventilated place.

4. Insert the branches into the soil.

Inserting cuttings into the soil is the last step of how to cut branches of the fortune tree. Use chopsticks to poke a small hole in the potting soil, put the cuttings of the fortune tree into it, and compact the surrounding substrate with your hands, water it thoroughly and place it in a cool and ventilated place to maintain, and it will be able to take root in about a month. If you want it to grow better, you also need to understand how to manage the domestic fortune tree, which needs to be watered every 2 to 3 days after cuttings.

The propagation methods of fortune tree have sowing propagation, cuttings propagation, grafting propagation, and the commonly used propagation method is sowing propagation, cuttings propagation, wherein cuttings propagation is easy to take materials, and the probability of planting life is also very high, and many plants can be cultivated at the same time, it is best to carry out in spring or autumn, the climate is suitable, and the plant germination ability is also stronger, and the survival rate can be improved.

The propagation methods of fortune tree include sowing propagation, cuttings propagation, grafting propagation, and the commonly used propagation methods are sowing propagation and cuttings propagation, in which cuttings propagation is easy to take materials, and the probability of seed survival is also very high, and many plants can be cultivated at the same time.

1. Sowing and propagatingThe fortune tree can be propagated by sowing method, its seeds can not be left for too long, usually 9-10 months will bear seeds, after the seeds can be taken down, as soon as possible for sowing.

(2) Method:When sowing, water thoroughly to ensure that the soil is moist, and then sprinkle the seeds directly on the surface of the soil, cover the thin soil in the later stage, put it in a cool place, provide an environment of about 25 degrees, and take root in about a week.

2. Propagation by cuttingsFortune trees can be propagated by the rotation method of cuttings, to choose the right time, it is best to carry out in spring or autumn, the climate is suitable, the temperature is not high or low, and the plant is in the growing season, the germination ability is also stronger, and the survival rate can be improved.

(2) Method:The branches used for cuttings should be robust, semi-lignified, and 15-20 cm in length, and the upper leaves should be cut off after cutting, leaving a few pieces at the top to reduce nutrient consumption.

Generally, Susha Fiber Tung Width is used as nutrient soil, and it is best to water it once after insertion, and it is best to cover it with a transparent film, which can have a good moisturizing effect of destroying the brightness, providing an environment of 25 to 28 degrees, and it can take root in about half a month.

3. Grafting and propagationSome varieties of the fortune tree can be propagated by grafting, which has the advantage of maintaining the characteristics of the mother plant, which can usually be used in the month of the month.

(2) Method:Use the fortune tree itself as a rootstock, choose a young branch with 3 buds as a scion, operate it with a young branch splitting method, and put it in a plastic shed after grafting, which is done to avoid the newly grafted branches being rained, as long as you take care of it, it can grow into a sapling that year.

1. The fortune tree needs to prune its branches and leaves. Only timely and reasonable pruning can avoid unnecessary nutrient consumption and promote the growth of plants more vigorously.

2. When pruning, it is necessary to carry out topping first, and when the plant grows to 20 cm high, it is necessary to top, and it is necessary to carry out multiple topping, so that more side branches will be germinated, and the plant type will become more plump and beautiful. In addition, those found to be stunted, infected with pests and diseases, and long branches should also be cut off.